Hi , guys, finally , my favorite Image, works like a charm! thx guys!!!
Hi , guys, finally , my favorite Image, works like a charm! thx guys!!!
bassethound (09-12-11),Larry-G (09-12-11)
very good image, thanks a lot! but I have a problem with my dvbt usb stick. it has chipset it9135. I was download drivers from server. after install and reboot, I have file "dvb-usb-it9135.ko" in /lib/modules/3.1.0/kernel/drivers/media/d
vb/dvb-usb. then I was transfer firmware "dvb-usb-it9135.fw" in lib/firmware, give right 755. everything seams good, I can get epg data from dvb-t transponder, but no signal and no picture. and ofcourse, no dvb-t tuner in tuner list.
here what I get from dmesg:
dvb-usb: found a 'ITEtech USB2.0 DVB-T Recevier' in cold state, will try to load
a firmware
dvb-usb: downloading firmware from file 'dvb-usb-it9135.fw'
IT9135: This is IT9135 chip v1
IT9135: ~~~ .Fw file only include Omega1 firmware, Scripts1&2!!
IT9135: =========================================
IT9135: DRIVER_RELEASE_VERSION: v11.08.02.1
IT9135: FW_RELEASE_VERSION: V1_0_26_2
IT9135: API_RELEASE_VERSION: 203.20110426.0
IT9135: =========================================
IT9135: it9135_device_init success!!
dvb-usb: found a 'ITEtech USB2.0 DVB-T Recevier' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (ITEtech USB2.0 DVB-T Recevier)
DVB: registering adapter 1 frontend 0 (IT9135 USB DVB-T)...
dvb-usb: ITEtech USB2.0 DVB-T Recevier successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_it9135
on pli image 3.1.0. everything works fine. please help me cause without dvb-t usb working, I cant use this wondeful image.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
How can I edit the path of picons to usb
Just move them over to your usb path /picons and delete them from whereva else they may be stored. The image will auto detect it
"Patience is a virtue, Possess it if you can"
-------------------------------------------------------------------------------------------------------------------------------------------------------
How to Install Cams on ViX Image - Click Here / How to Setup Picons on ViX Image - Click Here
How to Use Image Manager & Backup Manager on ViX Image - Click Here / How to Use Log Manager on ViX Image - Click Here
How to Setup Inadyn on ViX Image - Click Here / How To Update Satellites.xml File - Click Here
How To Stream TV To iPhone & iPad - Click Here
-------------------------------------------------------------------------------------------------------------------------------------------------------
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.
that's it! now everything works fineopkg install usbtunerhelper
andyblac (10-12-11)
I was some bug in plugin cccam.info. when I start it, box cant receive any command from remote ( forbidden sign ). only solution is restart e2 with telnet command or with web interface
Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.
Torsven (10-12-11)
Dear Buddies,
I hereby appreciate all your efforts regarding image improvement and I'm pretty grateful that you guys support ET9000,
I've first flashed new BootLoader '' ET9X00 '' & then flashed the new Image , Everything is perfect upon restarting the box,
When I restart the box (but not Enigima) or deep-standby and then try to turn it on ,, It wouldn't boot , couple of blue blinking on the power button and then ET9X00 will appear on the front LCD-display and I'll just have the first Linux-tv logo as a video signal , The Box wouldn't boot-up and I need to re-flash the Image(2.3) again in order to boot the box ,,, the box works in order as long as I don't shut it down , and every time I need to turn it on to boot the box I have to flash the new vix image .
Therefore I would be thankful of you could assist me resolving the fault of the box (or image/bootloader) , I've also tried to downgrade the bootloader
& image to et9000 & 2.21 but failed.
Any idea ,technical help , suggestion or advisement will be of course highly appreciated .
Thank you beforehand.
Regards
When it doesn't boot up, can you still ftp or telnet in to the box?
As part of your setup, have you installed any plugins?! From feeds or manually?!
What happens if you just flash the image, then don't do anything else at all after the wizard. Then, do a deep standby or restart of the box, and see if you still have the problem...
Torsven (10-12-11)
Any news about my channel switching with numbers? I sent that logs you asked Can you confirm it's some bug or should I reflash my box or something?
Torsven (10-12-11)
---------------------------------------------------------------------------
Dear Sir,
Thanks a lot for the quick response,
When it doesn't boot-up I can't do anything except flashing the image and when I flash the image using USB then it's feasible to telnet or ftp the box
unless I shut it down . so any solution to install or re-install an appropriate boot-loader using telnet after flashing image and before shuttin down the box ?
First time I flashed the image,then ftp using ccc or dcc and then installed couple of plugins and uploaded the channel list ,, but afterwards
I found out the compatibility issues may be concern , thus I just flashed the image and didn't install ANYTHING but following the wizard and scanning services(for the 2nd,3rd,4th times image-flashing) and still have the same problem .
I tried couple of times doing flashing the image and box boots properly as long as I do not shut it down works well. I have a 2TB WD-Green SATA installed as well .
I'd be so glad to provide more details if required .
Thank you again for the kind assistance .
Best Regards.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!