How to setup picons onto usb stick ViX

[punisher]

In this tutorial I am going to show you how to put picons onto usb stick. This is 1 of a few ways of doing this and for me this is easier than unplugging usb plugging back in etc lol

For this you need a usb stick formatted as fat32 or ext3 and the usb to be mounted correctly in device manager as media/usb
You can check if this is the case by going to Menu/Setup/ViX/Devices Manager and should look like this below;

screenshot1.jpg

If your usb isnt mounted correctly then press "Green" to setup mounts then highligh usb and use you left and right arrows on your remote to get to media/usb and then press "Green" to save the settings

screenshot2.jpg

Download your desired picon set from the link below and extract the file

Please register to view content. Only take's a few seconds!

Once usb setup correctly you will need to connect via FTP into the box
For those that don't know how to setup FTP to the box then follow the first few steps of this guide to get your ftp setup

Please register to view content. Only take's a few seconds!

Once connected to your box you should see the screen below (or similar)

fxpftp.jpg

Go to media/usb/ and create a folder in there called picon. so it should look like the screen below

screenshot3.jpg

Then transfer all the images from the picon set that you downloaded into the picon folder and once complete it should look like so

picon.jpg

Reboot the box if needed and the picons will be displayed in the info bar

screenshot6.jpg

If you also want the picons to be displayed in the epg then press the epg button on your remote and then menu

If using PIG (Picture in Graphics) then you will need your settings to match below;

screenshot5.jpgscreenshot5b.jpg

If not using PIG (Picture in Graphics) then you will need your settings to match below;

screenshot4.jpgscreenshot4b.jpg

And thats it you now have picons setup on your ViX Image

[rob76]

Hi,

got all picons setup and running properly on VIX 2.1 but for some reason since VIX 2.0 I have been unable to get them displayed in the EPG. I've got all my settings as yours there but still no joy. Picons show up fine on the channel info. Any ideas?

thanks

[Stanman]

Have you a restart after making the changes?
Also def mounted as USB and not SDA1

[rob76]

Yes mate I've restarted a number of times since I've had this issue for a while. Also the USB drive is mounted as USB.

[punisher]

what version of vix did u say you wer on?

[rob76]

I'm on 2.1 now but also had this problem on 2.0

[punisher]

Have u tried updating to 2.2 as the tutorial above was really for 2.2 but should still work with 2.1

[rob76]

Oh I thought that was an older post. I'll leave it be for the moment then as I've got everything else running sweetly and don't wanna stir things up by upgrading.

[punisher]

have you tried just restarting the box and seeing if that brings the picons back in the epg?

[rob76]

Yeah mate restart didn't work. Here's a screenshot of the channel info that shows picons work there (I've changed my skin since the screenshot I posted earlier).