Any VU+ Uno receiver purchased from us will now have the FPGA Chip already re-programmed so the user will NOT need to be concerned regarding this.
Order from here http://www.world-of-satellite.co.uk/...llite-Receiver
Any VU+ Uno receiver purchased from us will now have the FPGA Chip already re-programmed so the user will NOT need to be concerned regarding this.
Order from here http://www.world-of-satellite.co.uk/...llite-Receiver
Official Distributor of Formuler products, GiGaBlue, Octagon,
Technomate, Tiviar, VU+, Xtrend and many more...Secure online ordering - Paypal and all major cards accepted - Order online 7 days a week!PRICE MATCH PROMISE - WE'LL TRY TO MATCH ANY UK PRICE**SEEN ANY PRODUCT CHEAPER? CONTACT US AND WE’LL TRY TO MATCH LIKE FOR LIKE!
The problem can now be fixed via a download to your box, here is the info.
Code:http://www2.vuplus.com/14-vuplus-articles/91-vu-uno-upgrade
Vu Duo 4K - Vu + Solo4K - Vu + Uno4K - Vu+Uno - Vu+Ultimo4K - Vu+ Zero - Vu+Solo-SE (In Black Evo ) - PrismCube
bassethound (23-07-11),punisher (23-07-11),Sicilian (23-07-11)
i can confirmed that problem on 30000SR especially on 8psk is solved
cheers
Important notice for users Vu + UNO!
As promised, Vu + UNO is now on sale from June 2011.
VU + is very grateful for your interest in our new product and will continue trying to update our products.
There have been several reports about the scanning (scan) problem in specific TP (with SR 30,000) new firmware is released to fix the problem.
It is highly recommended to update your Inbox if you encounter a problem when scanning channels with your box.
There are two ways to update your box.
One is using the USB memory stick and the other is update directly from the internet.
Option A) using USB memory stick.
1. binary Firmware download at the link below.
http://archive.vuplus.com/download/f...uno/TS_PRO.dat
2-save the file to download data on USB memory card.
3. Attach the USB memory stick to your box and reboot. (or restart the GUI)
4. plug-in Menu Goto FPGA.
5. Select the data file in the USB memory card and start ' update '.
6. reboot your box.
Option B) update directly from the internet
1. plug-in Menu Goto FPG.
2. download the data file, by pressing the button ' blue '.
3. Select the data file downloaded and start ' update '.
4. reboot your box.
Download the attached guide for the detailed explanation of update.
Note: this update should only be done with the official image mounted ...
thanks for the post Luar but there is already a sticky created for this
Code:http://www.world-of-satellite.com/showthread.php?9781-Notice-from-Vu-Vu-Uno-firmware-upgrade
"Patience is a virtue, Possess it if you can"
-------------------------------------------------------------------------------------------------------------------------------------------------------
How to Install Cams on ViX Image - Click Here / How to Setup Picons on ViX Image - Click Here
How to Use Image Manager & Backup Manager on ViX Image - Click Here / How to Use Log Manager on ViX Image - Click Here
How to Setup Inadyn on ViX Image - Click Here / How To Update Satellites.xml File - Click Here
How To Stream TV To iPhone & iPad - Click Here
-------------------------------------------------------------------------------------------------------------------------------------------------------
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
Well, I've updated and scans tp 30000, now the problem is that decodes the AAC-HE, and the deco is that if you decode AAC-HE
Anyone know how to fix
greetings
Hello,
upgrade can be done in any image, just reboot after upgrade is finished.
Sound has nothing to do with machine or image, look at Emus and that is plenty of information about it around. but basically it's nothing to do with image. I am sure if you take it into consideration it will save you time trying to test different images...
regards
in all honesty it really makes no difference as the box can be re-flashed again in under 5 mins, and the backup feature in images such as VIX means you can make a exact backup of your system which can be re-flashed and running again in minutes with no further setup needed.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.