D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
hrmm Tried to DreamBoxEdit to send the above items to my STB got this msg:
Connecting to 192.168.1.116.
Connected.
Dreambox response: Login successful.
** Getting directory list /etc/enigma2/* **
Starting FTP transfer
Transfer complete
** Sending file "/etc/enigma2/lamedb" **
Starting FTP transfer
Transfer complete
** Sending file "/etc/enigma2/blacklist" **
Starting FTP transfer
Transfer complete
** Sending file "/etc/enigma2/bouquets.tv" **
Starting FTP transfer
Transfer complete
** Sending file "/etc/enigma2/userbouquet.dbe00.tv" **
Starting FTP transfer
Transfer complete
** Sending file "/etc/enigma2/userbouquet.dbe01.tv" **
Starting FTP transfer
Transfer complete
** Sending file "/etc/enigma2/userbouquet.dbe02.tv" **
Starting FTP transfer
Transfer complete
** Sending file "/etc/enigma2/userbouquet.dbe03.tv" **
Starting FTP transfer
Transfer complete
** Sending file "/etc/enigma2/userbouquet.dbe04.tv" **
Starting FTP transfer
Transfer complete
** Sending file "/etc/enigma2/userbouquet.dbe05.tv" **
Starting FTP transfer
Transfer complete
** Sending file "/etc/enigma2/userbouquet.dbe06.tv" **
Starting FTP transfer
Transfer complete
** Sending file "/etc/enigma2/userbouquet.dbe07.tv" **
Starting FTP transfer
Transfer complete
** Sending file "/etc/enigma2/userbouquet.dbe08.tv" **
Starting FTP transfer
Transfer complete
** Sending file "/etc/enigma2/userbouquet.dbe09.tv" **
Starting FTP transfer
Transfer complete
** Sending file "/etc/enigma2/userbouquet.dbe0a.tv" **
Starting FTP transfer
Transfer complete
** Sending file "/etc/enigma2/userbouquet.dbe0b.tv" **
Starting FTP transfer
Transfer complete
** Sending file "/etc/enigma2/userbouquet.dbe0c.tv" **
Starting FTP transfer
Transfer complete
** Sending file "/etc/enigma2/userbouquet.dbe0d.tv" **
Starting FTP transfer
Transfer complete
** Sending file "/etc/enigma2/userbouquet.dbe0e.tv" **
Starting FTP transfer
Transfer complete
** Sending file "/etc/enigma2/userbouquet.dbe0f.tv" **
Starting FTP transfer
Transfer complete
** Sending file "/etc/enigma2/userbouquet.dbe10.tv" **
Starting FTP transfer
Transfer complete
** Sending file "/etc/enigma2/userbouquet.dbe11.tv" **
Starting FTP transfer
Transfer complete
** Sending file "/etc/enigma2/userbouquet.dbe12.tv" **
Starting FTP transfer
Transfer complete
** Sending file "/etc/enigma2/userbouquet.dbe13.tv" **
Starting FTP transfer
Transfer complete
** Sending file "/etc/enigma2/userbouquet.favourites.tv" **
Starting FTP transfer
Transfer complete
** Sending file "/etc/enigma2/bouquets.radio" **
Starting FTP transfer
Transfer complete
** Sending file "/etc/enigma2/userbouquet.favourites.radio" **
Starting FTP transfer
Transfer complete
** Sending file "/etc/tuxbox/satellites.xml" **
Starting FTP transfer
Transfer complete
** Sending file "/etc/tuxbox/terrestrial.xml" **
Starting FTP transfer
Transfer complete
** Sending file "/etc/tuxbox/cables.xml" **
Starting FTP transfer
Transfer complete
Disconnecting.
Disconnected.
Network response: <?xml version="1.0" encoding="UTF-8"?>
<e2simplexmlresult>
<e2state>True</e2state>
<e2statetext>reloaded both</e2statetext>
</e2simplexmlresult>
Could not connect to Dreambox on IP adress 192.168.1.116, check the IP address and/or your network.
Hrmmm, What is that? It says to Reboot by hand for new setting to take effect is an Error display style msg?
Hold down standby button on remote, then select restart Enigma2.
The above is normal.
After restart you will see the new bouquets.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
Channo786 (26-01-11)
Thanks that did load correctly, However when the STB loads up nicely with "userbouquet" When I select and press OK on a channel I can not get Picture? I know i might be breaking the rules here, but I don't seem to know what I have to do next from here on...I go over at pressing Blue Button for S**tC@m it says to set that up...There it says "No Config file found, Please Setup MGcamd first in /var/keys."
You don't want to asnwer that one it's ok, I'll just have to dig around try to pick something somewhere...trial n error quest. Wouldn't mind PM either.
Hi there - real newbie here! Just picked up my duo 3 days ago and have most features working well however I'm having some problems - it will recognise flashdrives but not always a usb hdd; plus when trying to play movie files, with mp4 and flv video Ok but no sound. With avi files, sound but no video. mp3 files no sound but wav fine. Just a bit confused as to why and what I could be doing wrong!
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
hi i am having problem understanding what picons are and what do they do, can someone explain please??
I'm setting up my Vu+duo, bought 2nd hand. Previous user had it set up for freesat. I have a motorised, and can't actually receive freesat at current location.
I've the one line going to tuner a, positioner setting completed. Nothing in tuner b. However in both scan modes, i can only search 28.2 east?
I deleted the pre-saved channel lists and installed new motorised ones in case this is an issue. What am i missing?
Thanks!
You might want to try updating your satellite.xml file and choose the satellites you want and then reboot an try rescanning again. You can generate a satellite.xml file from here
Code:http://satellites-xml.eu/
"Patience is a virtue, Possess it if you can"
-------------------------------------------------------------------------------------------------------------------------------------------------------
How to Install Cams on ViX Image - Click Here / How to Setup Picons on ViX Image - Click Here
How to Use Image Manager & Backup Manager on ViX Image - Click Here / How to Use Log Manager on ViX Image - Click Here
How to Setup Inadyn on ViX Image - Click Here / How To Update Satellites.xml File - Click Here
How To Stream TV To iPhone & iPad - Click Here
-------------------------------------------------------------------------------------------------------------------------------------------------------
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
druss (03-03-11)
Yes i agree with punisher. It sounds like your satellites.xml only has the settings for 28.2 east. First thing I would do is load a new satellites.xml file to see it that remedies your problem.
Sent from my HTC Desire
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
druss (03-03-11)
Thanks for that, both. Actual channels coming in!
What files should be in the flash ram ? and how much free space should I have after VIX 2.03 is installed ?
I may installed the epg into the flash ram by mistake.
What folder do I look in ?
As a new user, thanks for the tutorial.
Just a note: The settings links is no longer active.
so how would i put this in my gigablue box
Latitude: 53.7416°
Longitude: -2.3990
is it 000.239 west
053.741 east