How install and configure inadyn

[fintannl]

thanks skin, for starters do you get error code 127 in your telnet session when you install the ipk. i think this is the crux of the problem

[Skin]

Try to reinstall Vix, use the guide for install inadyn, ignore error, and after say me if inadyn works on your receiver.

[fintannl]

i have reinstalled vix so many times my head is spinning. i've even played with the dyndns plugin. Now I do not say that this plugin does not work but it has two MAJOR defects. One is that the minute you activate suddenly you get the system busy icon on the tv nearly all the time so you can't even change channels. The next is the fact that when you rebbot the system you have to re-enter all details for dyndns again. So its a truly terrible plugin.

I tend to heed errors when I see them. I did try to do what you said but that just meant I needed to reinstall VIX once again. As expected the system would not reboot. Could you please answer the initial question. When you installed did you or did you not get this error 127. I have a feeling that either the ipk file you uploaded is corrupted or it does not work on vix 1.1.

in the meantime i will continue to update my ip using my dm500 inadyn. sicilian, any hope that we could see an inadyn downloadable plugin for vix

[Skin]

Attached plugin for inadyn works on Vix 1.1 and Vti 2.0. I not remember for error, ma after this post other people have installed plugin on vix and vti.

[fintannl]

as a suggestion rather than using your local ipk for inadyn, please follow the steps i followed, as in i downloaded the file off this site. is it possible it is corrupted. note i had to make one minor change where i am using dyndns to update my dynamic address rather no-ip. surely the plugin should work for both systems

[Skin]

You have p.m.

[fintannl]

my friend, i have zero interest in pms. this is an issue that many users will suffer from so i would hope that the solution can be highlighted to these same users. i cannot accept the answer currently supplied in this thread. i am not short on understanding linux systems and what has been supplied in this thread simply does not work with vix or vti. i have tried both. is there any other user who can confirm or deny my findings. as said the only difference in my case is that i use dyndns rather than no-ip

[Skin]

my friend, i have zero interest in pms. this ...

The p.m. was for send you the plugin. This is my edited log of inadyn:
INADYN: Started 'INADYN version 1.96' - dynamic DNS updater.
I:INADYN: IP address for alias 'my site' needs update to 'xx.xx.xx.xx'
I:INADYN: Alias 'my site' to IP 'xx.xx.xx.xx' updated successful.
I:INADYN: IP address for alias 'my site' needs update to 'xx.xx.xx.xx'
I:INADYN: Alias 'my site' to IP 'xx.xx.xx.xx' updated successful.
INADYN:IP: Error '0x0' resolving host name 'ip1.dynupdate.no-ip.com'
W: DYNDNS: Error 'RC_IP_INVALID_REMOTE_ADDR' (0x12) when talking to IP server
W:'RC_IP_INVALID_REMOTE_ADDR' (0x12) updating the IPs. (xx xxx)
I:INADYN: IP address for alias 'my site' needs update to 'xx.xx.xx.xxx'
I:INADYN: Alias 'my site' to IP 'xx.xx.xx.xxx' updated successful.

[fintannl]

thanks. that looks fine. but i would like to see the results of the telnet command when loading the ipk. this fails every time for me on vix 1.1

[saro]

Hello,
Can I install and use INADYN in Dreambox 7020 HD ?! (I have CVS image on my DM7020 HD.)

[punisher]

Not sure about this version in dreambox. Try doin a search on google for an inadyn version for dreambox. Ther must b one out there

[LUCDC2000]

Hello
To change enigma2.sh I can not find
or change into inadyn can you please help me
because at each change file enigma2.sh my vu + duo is blocked at startup
here is my file

enigma2.sh 1.txt

#!/bin/sh

prefix=/usr
exec_prefix=/usr
datarootdir=${prefix}/share

if [ -x /usr/bin/showiframe -a -f /usr/share/backdrop.mvi ]; then
/usr/bin/showiframe /usr/share/backdrop.mvi
fi

# hook to execute scripts always before enigma2 start
if [ -x /usr/bin/enigma2_pre_start.sh ]; then
/usr/bin/enigma2_pre_start.sh
fi

if [ -d /home/root ]; then
cd /home/root
fi

LIBS=/usr/lib/libopen.so.0.0.0

#check for dreambox specific passthrough helper lib
if [ -e /usr/lib/libpassthrough.so ]; then
LIBS="$LIBS /usr/lib/libpassthrough.so"
fi

(sleep 2; echo "enigma2 is the main pvr application... adjust oom score!"; PID=$(pidof enigma2); \
[ -e /proc/$PID/oom_score_adj ] && echo "-999" > /proc/$PID/oom_score_adj || echo "-17" > /proc/$PID/oom_adj;) &

LD_PRELOAD=$LIBS /usr/bin/enigma2

# enigma2 exit codes:
#
# 0 - restart enigma
# 1 - halt
# 2 - reboot
#
# >128 signal

ret=$?
case $ret in
1)
/sbin/halt
;;
2)
/sbin/reboot
;;
4)
/sbin/rmmod lcd
/usr/sbin/fpupgrade --upgrade 2>&1 | tee /home/root/fpupgrade.log
sleep 1;
/sbin/rmmod fp
/sbin/modprobe fp
/sbin/reboot
;;
*)
;;
esac

thank you very much Luc