Just tried to do a new firmware upgrade for Vu Duo ViX 2.3 (Linux 3.1.1) 25-12-2011. Upgraded successfully but my Duo won't start. it just stays at starting ...... Can anybody help?
exact same here ..... just stays on 'STARTING' foreverOriginally Posted by ojsat
..... and no ... it wasn't an online update .... it was a proper reflash
Did you do a reflash?
"Patience is a virtue, Possess it if you can"
-------------------------------------------------------------------------------------------------------------------------------------------------------
How to Install Cams on ViX Image - Click Here / How to Setup Picons on ViX Image - Click Here
How to Use Image Manager & Backup Manager on ViX Image - Click Here / How to Use Log Manager on ViX Image - Click Here
How to Setup Inadyn on ViX Image - Click Here / How To Update Satellites.xml File - Click Here
How To Stream TV To iPhone & iPad - Click Here
-------------------------------------------------------------------------------------------------------------------------------------------------------
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
You might need to update the bootloader again and then flash imageexact same here ..... just stays on 'STARTING' forever
"Patience is a virtue, Possess it if you can"
-------------------------------------------------------------------------------------------------------------------------------------------------------
How to Install Cams on ViX Image - Click Here / How to Setup Picons on ViX Image - Click Here
How to Use Image Manager & Backup Manager on ViX Image - Click Here / How to Use Log Manager on ViX Image - Click Here
How to Setup Inadyn on ViX Image - Click Here / How To Update Satellites.xml File - Click Here
How To Stream TV To iPhone & iPad - Click Here
-------------------------------------------------------------------------------------------------------------------------------------------------------
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
Lewiscc (25-12-11)
even if you already have the new bootloader on the box re-flash the bootloader first via usb stick then power the box down and flash the image via usb stick.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
How do I do this reflash boot loader - My VU+ is not starting like the others - Great Christmas day!!
your Vu will restart if you flash it as for the bootloader it's exactly the same procedure as flashing a image from a usb stick.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Well, it's NOT working have tried 2 USB sticks - My I'm a bit pi**ed off.
ok .... thanks ... put it back as was to get it back on ..... will try later when i get peace .... if i get peace
Well tired a third USB stick - it reads and asks me to remove USb stick - I do this and it remains in "Starting" - Can anyone advise please !!!!!!!!!!!!
So uve reflashed bootloader whih only takes less than a minute and then switch box off pop usb stick in power box on see the display say reading/flashing/programming/removeusb and remove and then reboot?
"Patience is a virtue, Possess it if you can"
-------------------------------------------------------------------------------------------------------------------------------------------------------
How to Install Cams on ViX Image - Click Here / How to Setup Picons on ViX Image - Click Here
How to Use Image Manager & Backup Manager on ViX Image - Click Here / How to Use Log Manager on ViX Image - Click Here
How to Setup Inadyn on ViX Image - Click Here / How To Update Satellites.xml File - Click Here
How To Stream TV To iPhone & iPad - Click Here
-------------------------------------------------------------------------------------------------------------------------------------------------------
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
Thanks for reply - I have cooled down now. I'm not sure how to: reflashed bootloader???? - how do I do this ??
I have download newest image, but it still is locked in "starting"
Thank you for the help
you can get the bootloader here.
http://www.world-of-satellite.com/sh...2-3-19-10-2011
flash it the same way you would a image via usb
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Thank you will try now. I take it this is the file: ViX-2.3.GM-vuduo_usb.zip ?
Will let you know - family are going mad!!!! - my fault should not have done on line update!
Thanks again.
the bootloader is this file
duo_cfe_3_0_usb.zip
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Posting Permissions
Reply With Quote
