[SOLVED] Uno tunner problems

[world-of-satellite.co.uk]

Any VU+ Uno receiver purchased from us will now have the FPGA Chip already re-programmed so the user will NOT need to be concerned regarding this.

Order from here http://www.world-of-satellite.co.uk/...llite-Receiver

[Donnie]

The problem can now be fixed via a download to your box, here is the info.

http://www2.vuplus.com/14-vuplus-articles/91-vu-uno-upgrade

[kabise]

i can confirmed that problem on 30000SR especially on 8psk is solved

cheers

[Luar]

Important notice for users Vu + UNO!



As promised, Vu + UNO is now on sale from June 2011.

VU + is very grateful for your interest in our new product and will continue trying to update our products.

There have been several reports about the scanning (scan) problem in specific TP (with SR 30,000) new firmware is released to fix the problem.
It is highly recommended to update your Inbox if you encounter a problem when scanning channels with your box.

There are two ways to update your box.
One is using the USB memory stick and the other is update directly from the internet.

Option A) using USB memory stick.

1. binary Firmware download at the link below.
http://archive.vuplus.com/download/f...uno/TS_PRO.dat
2-save the file to download data on USB memory card.
3. Attach the USB memory stick to your box and reboot. (or restart the GUI)
4. plug-in Menu Goto FPGA.
5. Select the data file in the USB memory card and start ' update '.
6. reboot your box.

Option B) update directly from the internet

1. plug-in Menu Goto FPG.
2. download the data file, by pressing the button ' blue '.
3. Select the data file downloaded and start ' update '.
4. reboot your box.

Download the attached guide for the detailed explanation of update.

Note: this update should only be done with the official image mounted ...

[punisher]

thanks for the post Luar but there is already a sticky created for this

http://www.world-of-satellite.com/showthread.php?9781-Notice-from-Vu-Vu-Uno-firmware-upgrade

[Luar]

thanks for the post Luar but there is already a sticky created for this

http://www.world-of-satellite.com/showthread.php?9781-Notice-from-Vu-Vu-Uno-firmware-upgrade

Note: this update should only be done with the official image mounted ...

[yavoy]

Well, I've updated and scans tp 30000, now the problem is that decodes the AAC-HE, and the deco is that if you decode AAC-HE

Anyone know how to fix

greetings

[Donnie]

Note: this update should only be done with the official image mounted ...

Works just fine with Black Hole Image

[Luar]

Well, I've updated and scans tp 30000, now the problem is that decodes the AAC-HE, and the deco is that if you decode AAC-HE

Anyone know how to fix

greetings

If CCcam 2.2.1...

[lampiao]

Hello,
upgrade can be done in any image, just reboot after upgrade is finished.
Sound has nothing to do with machine or image, look at Emus and that is plenty of information about it around. but basically it's nothing to do with image. I am sure if you take it into consideration it will save you time trying to test different images...
regards

[Larry-G]

in all honesty it really makes no difference as the box can be re-flashed again in under 5 mins, and the backup feature in images such as VIX means you can make a exact backup of your system which can be re-flashed and running again in minutes with no further setup needed.