Does the Sundtek Sat USB Tuner work perfectly with the Vu+ Duo with VIX 2.1 now, for Sky UK and other European satellites?
Does the Sundtek Sat USB Tuner work perfectly with the Vu+ Duo with VIX 2.1 now, for Sky UK and other European satellites?
the dvb stick in this thread is about the cable/terrestrial/radio version ... no sky ... for the sky you need the sky ultime one and as far as i know it should work but its currently being tested by a few to see if there are any problems or not but will have to wait and see
"Patience is a virtue, Possess it if you can"
-------------------------------------------------------------------------------------------------------------------------------------------------------
How to Install Cams on ViX Image - Click Here / How to Setup Picons on ViX Image - Click Here
How to Use Image Manager & Backup Manager on ViX Image - Click Here / How to Use Log Manager on ViX Image - Click Here
How to Setup Inadyn on ViX Image - Click Here / How To Update Satellites.xml File - Click Here
How To Stream TV To iPhone & iPad - Click Here
-------------------------------------------------------------------------------------------------------------------------------------------------------
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
Still being tested at the moment amongst a lot of other stuff. A few guys have it and tryin it out. When its fully working we'l let everyone knw
"Patience is a virtue, Possess it if you can"
-------------------------------------------------------------------------------------------------------------------------------------------------------
How to Install Cams on ViX Image - Click Here / How to Setup Picons on ViX Image - Click Here
How to Use Image Manager & Backup Manager on ViX Image - Click Here / How to Use Log Manager on ViX Image - Click Here
How to Setup Inadyn on ViX Image - Click Here / How To Update Satellites.xml File - Click Here
How To Stream TV To iPhone & iPad - Click Here
-------------------------------------------------------------------------------------------------------------------------------------------------------
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
forrest1066 (02-06-11),FuManchu (02-06-11)
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM
IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ↓
Sicilian (07-06-11)
sorry to pester but is there any update on if this stick is now working sucessfully on the VU+ Duo?? Also i would like to ask a question, many of you advised me a while back on this thread that the USB Stick would not control a motorised setup. When the stick is working would this setup work
INTERNAL TUNER 1 - Motorised Dish Connection
INTERNAL TUNER 2 - 1st Connection for Sly Mindish static at 28 Degrees
USB TUNER - 2nd Connection for Sly Minidish static at 28 Degrees
If anyone could advise then that would be awesome
any update on this guys
I get the same symptom on my Hauppauge Nova TD stick. Perhaps there is a memory leak or something... I'll try restarting enigma daily (via EMC 2.02 config options) and see whether my symptoms are reduced. Running VuDuo with vix 2.2.109 fitted with 4 x tuners (2 original sat tuners & 2 terrestrial tuners in usb dual Nova TD ... 7MHz bandwidth for Australian terrestrial). The Sat tuners continue to perform normally when the terrestrial tuners go missing. My terrestrial tuners are logical C & D. When only one tuner is in use, it is typically tuner C. So it is more often tuner C that goes missing and it stays missing regardless of channel changing etc. It doesn't come back with an GUI restart, it requires a full reboot. If I start a recording (of the black screen!) which commits tuner C and then attempt to view another terrestrial channel, this brings in tuner D... and sometimes, but not always, I get a picture.
Anyhow, the Missus is not impressed that her attempts to record programs from terrestrial stations often end up with an empty file.
Another option I am considering is another image, in case it is something to do with Vix?
I get the same symptom on my Hauppauge Nova TD stick. Perhaps there is a memory leak or something... I'll try restarting enigma daily (via EMC 2.02 config options) and see whether my symptoms are reduced. Running VuDuo with vix 2.2.109 fitted with 4 x tuners (2 original sat tuners & 2 terrestrial tuners in usb dual Nova TD ... 7MHz bandwidth for Australian terrestrial). The Sat tuners continue to perform normally when the terrestrial tuners go missing. My terrestrial tuners are logical C & D. When only one tuner is in use, it is typically tuner C. So it is more often tuner C that goes missing and it stays missing regardless of channel changing etc. It doesn't come back with an GUI restart, it requires a full reboot. If I start a recording (of the black screen!) which commits tuner C and then attempt to view another terrestrial channel, this brings in tuner D... and sometimes, but not always, I get a picture.
Anyhow, the Missus is not impressed that her attempts to record programs from terrestrial stations often end up with an empty file.
Another option I am considering is another image, in case it is something to do with Vix?
we are looking for active coders to help out with DVB-T and WIFI drivers, but yet no one has come forward to offer any help.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
stick50jr (25-08-11)
Thanks for your reply Andy. Yes, I saw your request for coders but I fear that I don't have the experience to be of help. This type of software has interested me in the past but I've been left behind since rising to my 'Peter level' in employment which is a rather 'hands off' level.
I don't know whether it really is anything to do with vix. But if there's any way you think I can help, please let me know.
regards and thank you for your continuing efforts. (Surely some other coders will see the value in joining in given the high quality of what you've achieved)
from a very sunny place down under.
andyblac (25-08-11)
Have the same setup as yourself here in the Emerald Isle. Experienced same blank screen on tuner c with nova td. I finally uninstalled the vix drivers for nova t and installed the italysat plugin. Never had a problem since. Using it for over 2 months now. Just one thing to remember, everytime you do a firmware upgrade you will have to manually restart this plugin:
http://www.world-of-satellite.com/sh...light=italysat