Ok so I have been through the above. I have many screen grabs of what I did and the outcome below, although the epg data did populate their is large gaps. Some took a little while to update (5 min) but some data is still missing (see times on grabs)
screenshot1.jpg
screenshot2.jpg
screenshot3.jpg
screenshot4.jpg
screenshot5.jpg
screenshot6.jpg
screenshot7.jpg
screenshot8.jpg
screenshot9.jpg
screenshot10.jpg
abu baniaz (04-03-16)
OK, we are making progress.
Delete all your channel data (See commandds link in my signature).
Do not use ABM. Perform a non-ABM scan and then upload your lamedb file, it is located in /etc/enigma2. You will have to zip it in order to attach it.
screenshot20.jpg
What option? Manual Scan?
In the tuner config, please make sure you have selected Winter Hill. Not Europe or UK.
Yes, manual scan, then complete. If you can change to T2, do that too please.
Last edited by abu baniaz; 04-03-16 at 20:16.
With only allowing winter hill it did not find many channels....
screenshot31.jpg
lamedb.zip
Sorry to ask, are you 100% you selected complete? It looks like you only scanned one mutiplex
If complete was incomplete, change the scan mode to automatic.
I was 99% sure I did as you suggested, however to make sure I cleared the channels and did it again.
screenshot40.jpg screenshot41.jpg
screenshot42.jpg screenshot43.jpg
Looks like it just scanned these.......
screenshot45.jpg
Ok, so I tried scanning Auto for T and T2.......
screenshot50.jpg screenshot51.jpg
lamedb.zip
I also appear to now have most if not all of the EPG for the next 7 days.
Last edited by iamSteve; 05-03-16 at 11:16.
Well, as I noted before, tuning on Winter Hill does seem to be an oddity at the moment.....
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD
I guess I now need to use ABM to set the channels up, then turn on the satellite feeds and use ABM?
Once downloaded I guess its CrossEPG for the Sky/Astra Satellite listings?
IIRC, the reason we added WinterHill as a separate entry in the terrestrial xml file for non-ABM scans was that there were issues with eingma2 tuning in the area.
@Iamsteve, for time being please do not use ABM for Winterhill. We'll have to add some custom transponder entries.
So far you have only got the following frequencies from your scan.
Can you manually scan these frequencies. You may have to alter the scan settings to T2Code:<transponder centre_frequency="706000000" bandwidth="0" system="0" <!-- Ch 50 --> <transponder centre_frequency="778000000" bandwidth="0" system="0" <!-- Ch 59 --> <transponder centre_frequency="770000000" bandwidth="0" system="0" <!-- Ch 58 --> <transponder centre_frequency="738000000" bandwidth="0" system="1" <!-- Ch 54 (HD) --> <transponder centre_frequency="698000000" bandwidth="0" system="0" <!-- Ch 49 --> <transponder centre_frequency="746000000" bandwidth="0" system="0" <!-- Ch 55 --> <transponder centre_frequency="754000000" bandwidth="0" system="0" <!-- Ch 56 -->
Check that you can receive channels on these frequencies. Once we have a lamedb containing all these, I will upload an ABM xml file for you.Code:<transponder centre_frequency="554000000" bandwidth="0" system="1" <!-- Ch 31 (HD) --> <transponder centre_frequency="602000000" bandwidth="0" system="1" <!-- Ch 37 (HD) --> <transponder centre_frequency="762000000" bandwidth="0" system="0" <!-- Ch 57 -->
EDIT:
Please start from scratch, do not use ABM for Terrestrail.
Last edited by abu baniaz; 05-03-16 at 13:54.