Just to add to the above Auto refresh is set to no, my solo 4k is set to no but it has both satellite and freeview epg working.
Just to add to the above Auto refresh is set to no, my solo 4k is set to no but it has both satellite and freeview epg working.
It just had the first line now I have added the 2nd line, does this look better?
1_0_19_22CF_80D_2_11A0000_0_0_0.jpg
Still can't OK this window, (Also changed to BBC ONE HD and confirmed this is using the DVB-T Tuner)
1_0_19_22CF_80D_2_11A0000_0_0_0.jpg
every time I try....
1_0_19_22CF_80D_2_11A0000_0_0_0.jpg
I have even turned the box to standby and gone back 10 min later, but still will not let me OK the window.
Last edited by iamSteve; 02-03-16 at 21:20.
You have selected "BBC One Wal HD", this is a satellite service. The data coming from the satelllite signal will not contain EPG data about terrestrial services. If you want to pursue EPG refresh you need to select you must select a Terrestrial service. I would also select fake recording.
As I said/indicated before, setting a daily zap timer/recording for two minutes will achieve the same thing.
Bangord30 (03-03-16)
Thank you for your time and tips. Its been 12 hours now and the box still shows....
1_0_19_22CF_80D_2_11A0000_0_0_0.jpg
Regarding "If you want to pursue EPG refresh", well no really it sound like a bit of a bodge. I would rather the DVB-T tuner just supply the TV guide for Freeview just the same as it does on the TV, but its not working on this box for some reason.
Is their a set up guide for numpties somewhere so I can get the Freeview EPG working simply?
The satellite EPG is working fine.
Post 15 includes an image of my settings, set up as post 14 on my solo 2 and solo 4k, however the solo 2 has a blank epg?
I use epg refresh for freeview on solo4k and have no problems, for the channel I use the sd version of bbc1 which in my area is called BBC1 N West, I use this with false recording of 180 seconds and have it set to run 5 minutes after opentv, it is set to poll in a 15 minute period. This will only run if I am not in deep standby and if the tuner is not in use, these are advanced options you need to check.
VU+ Ultimo 4K 3TB, 1x Twin DVBS-2 FBC / 1x DVB-C FBC/ 1x Twin DVB-T2.
VU+ Solo4k 2TB, 2xFBC-S2, 2xC/T2, 1x Sundtek .
1m Motorised Single LNB Dish, 60cm Fixed Octo LNB Dish.
Samsung 65HU8500 with SEK-3500, Denon AVR-X2200W 5.1.2.
Oppo UDP-203
Panasonic 55VT50.
Zidoo X9S
Amazon Fire TV 4k & Amazon Fire TV (SPMC sideloaded).
... also does the box have to be in daily use for the post 14 suggestion to work?
What tuner are you using?
Can you zap to the terrestrial services without a problem?
No.
Freeeview sends the EPG on all muxes all of the time. Each mux gets its own data more frequently than that from the other muxes, so the data on the channel you are watching will populate quickly.
But you should get the entire EPG in 5~10 mins. It's how Freeview TVs work.
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD
VU+ Ultimo 4K 3TB, 1x Twin DVBS-2 FBC / 1x DVB-C FBC/ 1x Twin DVB-T2.
VU+ Solo4k 2TB, 2xFBC-S2, 2xC/T2, 1x Sundtek .
1m Motorised Single LNB Dish, 60cm Fixed Octo LNB Dish.
Samsung 65HU8500 with SEK-3500, Denon AVR-X2200W 5.1.2.
Oppo UDP-203
Panasonic 55VT50.
Zidoo X9S
Amazon Fire TV 4k & Amazon Fire TV (SPMC sideloaded).
Somewhere along the lines something has gone amiss with the setup of your receiver. I very much doubt that the turbo tuner is incapable of absorbing the EPG off the Terrestrail stream. I will nonetheless ask someone to confirm.
To help isolate the isue
Please do the followoing:
1. Make an image backup so you can revert to it at a later stage .
2. Halt your system using using command
3. Wait 10 secondsCode:init 4
4. Delete any instances of epg.dat on all your storage devices
5. Flash image 037. Do not restore any settings or plugins.
6. Only installl the drivers for your USB tuner. Do not install any other plugins
7. In the EPG menu, change to storage device to your HDD. Do not alter anything else.
8. Disable all other tuners apart from the USB tuner one. Set that for Winterhill, not Europe.
8. Create your bouquets using ABM or perform a non-ABM scan using Winterhill.
9. Zap to any Terrestrial service And waith 2 minutes.
10. Check your EPG if the problem is still there.
The above will rule out all other issues, please follow exactly. If there are no problems, we can proceed to add other items to your setup avoiding issues. If the problems still exist, you can reflash your backup image made at stage 1.