If anyone is having speed issues/intermittent connection issues with the new vimsuperhubs then give me a shout in this topic and i will help out. we have managed to find a few work arounds till new firmware is released on the superhubs
If anyone is having speed issues/intermittent connection issues with the new vimsuperhubs then give me a shout in this topic and i will help out. we have managed to find a few work arounds till new firmware is released on the superhubs
Last edited by punisher; 10-03-11 at 22:44.
"Patience is a virtue, Possess it if you can"
-------------------------------------------------------------------------------------------------------------------------------------------------------
How to Install Cams on ViX Image - Click Here / How to Setup Picons on ViX Image - Click Here
How to Use Image Manager & Backup Manager on ViX Image - Click Here / How to Use Log Manager on ViX Image - Click Here
How to Setup Inadyn on ViX Image - Click Here / How To Update Satellites.xml File - Click Here
How To Stream TV To iPhone & iPad - Click Here
-------------------------------------------------------------------------------------------------------------------------------------------------------
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
I hate the damn Super Hub.....Made them give me seprate modem and router.... s
Setup: Vu+ Duo, Orbital 90cm Dish, Technomate TM2600 Motor, Inverto twin LNB
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
hi , unfortunetly i have the superhub and as soon aas i connect it to my receiver it starts cutting out every few seconds. cannot get a picture for more than 30 seconds before the steady light on the hub disappears .
any advice would be greatly appreciated
mickey
ok, theres a few work arounds
1. Login into routers config page 192.168.0.1
2. Click Wireless Network Settings.
3. Near the bottom of the screen, click Manually select wireless channel, and then choose a channel from the Wireless Channel drop-down menu, i used 10
4. Change wireless band settings to 2.4GHz
5. If you go into advanced settings, change the speed from 300mbps to 145mbps, this has fixed so many speed and connection issues
6. Also in the services tab, disabled IP flood detection and disable the firewall, save all settings, reboot if you need to and so far 99% of issues have been solved by making these changes
not sure why but apparently a firmware update in the near future fixes this
"Patience is a virtue, Possess it if you can"
-------------------------------------------------------------------------------------------------------------------------------------------------------
How to Install Cams on ViX Image - Click Here / How to Setup Picons on ViX Image - Click Here
How to Use Image Manager & Backup Manager on ViX Image - Click Here / How to Use Log Manager on ViX Image - Click Here
How to Setup Inadyn on ViX Image - Click Here / How To Update Satellites.xml File - Click Here
How To Stream TV To iPhone & iPad - Click Here
-------------------------------------------------------------------------------------------------------------------------------------------------------
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
Alanp (11-03-11),bassethound (11-03-11)
lol in the future no idea when but the new firmware will allow you to use it as modem only, so you can switch off wireless capabilities, but those fixes i gave above are a workaround the connectivity issues
"Patience is a virtue, Possess it if you can"
-------------------------------------------------------------------------------------------------------------------------------------------------------
How to Install Cams on ViX Image - Click Here / How to Setup Picons on ViX Image - Click Here
How to Use Image Manager & Backup Manager on ViX Image - Click Here / How to Use Log Manager on ViX Image - Click Here
How to Setup Inadyn on ViX Image - Click Here / How To Update Satellites.xml File - Click Here
How To Stream TV To iPhone & iPad - Click Here
-------------------------------------------------------------------------------------------------------------------------------------------------------
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM
IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ↓
Look for the new firmware in the 2nd quarter (April - June)
i was lucky enough to get rid of my superhub and stick to my modem and router lol prefer it as it allows a bit more customisation than the super hub, but the future plans of the super hub do look promising, just going to wait on it and then upgrade. But when 100mb comes out imma need to upgrade ayway cuz i wont have a choice lol but ill cross that road when it comes
"Patience is a virtue, Possess it if you can"
-------------------------------------------------------------------------------------------------------------------------------------------------------
How to Install Cams on ViX Image - Click Here / How to Setup Picons on ViX Image - Click Here
How to Use Image Manager & Backup Manager on ViX Image - Click Here / How to Use Log Manager on ViX Image - Click Here
How to Setup Inadyn on ViX Image - Click Here / How To Update Satellites.xml File - Click Here
How To Stream TV To iPhone & iPad - Click Here
-------------------------------------------------------------------------------------------------------------------------------------------------------
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
Hi mate
If you check out google there are already instructions on how to do this
this is what i found
How to use your own router with a Virgin media Hub/Superhub
So here's how.
1. Plug your router’s WAN port into any of the LAN ports on the Hub/Superhub.
2. Plug your PC into any Hub/Superhub LAN port and access the management page by entering 192.168.0.1 into your web browser.
3. Login to the Hub/Superhub the username/password details are on a sticker underneath or on the side of your hub.
4. On the LAN IP page examine the DHCP lease info; you should see your PC and the second router listed, make a note of the MAC address of the router and add it to the DHCP reservation section and give the second router an IP address of 192.168.0.10.
5. Now go to the DMZ host page on the Hub/Superhub and enter the same IP address of the second router (e.g. 192.168.0.10).
6. Turn off the Hub/Superhub wireless functionality and firewall as this will let your second router provide it instead.
7. Reboot the second router by powering it off wait at least 60 seconds before powering back on again.
8. Plug your PC into the second router, login to the second router and set the following :
In router’s WAN setup for "Does your Internet connection require a login" set to NO, (this may also be known as Internet Connection type - "Automatic Configuration - DHCP" as it varies from router to router) and then you should see the WAN or internet as 192.168.0.10.
Connect your wired devices to the second router reboot once more and you should be good to go.
While im here can you guys with superhub please confirm do you have in your vu network setup the ip for the two name servers which i checked are virgin media im asking as in my last config i just had the ip of the router with no name servers.
regards
satmanbasil
i use virgin medias name servers in my vu duo
thats a long work around to switching the wifi off, hopefully the new firmware should have a simple on/off switch to make modem only ... (god i hope it does lol)
"Patience is a virtue, Possess it if you can"
-------------------------------------------------------------------------------------------------------------------------------------------------------
How to Install Cams on ViX Image - Click Here / How to Setup Picons on ViX Image - Click Here
How to Use Image Manager & Backup Manager on ViX Image - Click Here / How to Use Log Manager on ViX Image - Click Here
How to Setup Inadyn on ViX Image - Click Here / How To Update Satellites.xml File - Click Here
How To Stream TV To iPhone & iPad - Click Here
-------------------------------------------------------------------------------------------------------------------------------------------------------
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
Hi mate
Another quick question regarding network when i run a network test i get
green lan connection
red local network
red dchp ...... I know i disable this one
green ip
and green server
I have read somewhere this is a false reading does yours do the same? if not can you advise what u may have done i have tryed with enable dchp but no luck .
regards
satmanbasil
yes mate in vix it is present as its a base pli image fault and untill pli fix it it will stay current in vix
unless andy finds a fix
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM
IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ↓
Sorry I should have mentioned the proble is with the no local network reporting in vix 2.0 image how ever i can ftp telnet etc
regards
satmanbasil