Guys,
the new drivers etc are in the feeds, but unfortunately you need run a couple of commands to gets things to use the new drivers.
first do a software update, then reboot as normal then run all the commands below in a telnet session:
then reboot your box, this will remove the old drivers and install new ones, this will not work on any other image apart from ViX so don't try on PLi.Code:opkg remove --force-depends et9000-fpupdate opkg remove --force-depends et9000-dvb-modules opkg install clarketech-fpupdate opkg install clarketech-dvb-modules
if the above fails, here is a complete image to flash.