My first question re Octagon sf8008:-
Installed Stalker and went to Stalker Setup>OK and Poral URL 1.
How to enter the details like url, port, username and password, as usually, on other plugins
the details are entered on separate lines.
Thks.
My first question re Octagon sf8008:-
Installed Stalker and went to Stalker Setup>OK and Poral URL 1.
How to enter the details like url, port, username and password, as usually, on other plugins
the details are entered on separate lines.
Thks.
Octagon sf8008 combo Vuplus Solo2 DM800
You just enter in the url. You have to give your IPTV supplier your MAC address from
The Stalker setup.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Chris2384 (29-05-20)
At octagon sf8008, Stalker does not show the correct ePG, but one hour ahead. How to fix it.
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
I have tried all the existing imagery, and the same problem is everywhere.
I do not see a problem with the iptv supplier, because the mutant hd51 of all existing images is working properly,
also from the same ptv supplier. I see the problem in the plugin for this box.
The EPG comes from the supplier. Both hd51 and sf8008 use the qtstalker plugin
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
It is not like that. I am installing the same image openvix-5.4.005.release on octagon sf8008 and hd51,
and on both boxes I use IPTV from the same supplier, on hd51 epg goes exactly to the second,
while on sf8008, it shows one hour ahead.
The same image from sf800, I make the multibot backup, and install it on hd51 via neobot, and here it works precisely to the second.
This means that something is wrong with the stalker bin file for sf8008
To be clear, I use the same image, the same plugin, the same iptv provider on both boxes,
one shows exactly while the other shows one hour in advance. If I replace it
If I replace stalker.bin from sf800 to hd51, the same thing happens, so it shows one hour early,
while if I replace Stakler.bin from hd51 to sf8008, the plugin does not start on sf8008, Which means that something is missing in Stalker.bin
The time zone setting is correct, and it shows me correctly.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
There used to be a stalker.xml in /etc or /etc/enigma2 (if not check thru few locations) if I remember rightly, you could edit timezone i.e Europe/London.
But this was a good while ago I had done this, so it may have changed alot since then and file may be redundant.
There is no effect, and it is not a problem, because it synchronizes the time well and shows it correctly,
the problem is the epg, which is not synchronized correctly, and the time zone can not be changed in the Stalker settings.
I confirmed my suspicion that the problem lies in the binary part of the plugin.
Аfter seven days of hard work, finally achieved effect. EPG reading goes well.
Thanks to everyone who got involved in the discussion, this topic can be closed.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K