Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 1 of 2 12 LastLast
Results 1 to 15 of 16

Thread: Flashing a Zgemma H7

  1. #1

    Title
    Member
    Join Date
    Aug 2012
    Posts
    36
    Thanks
    5
    Thanked 1 Time in 1 Post

    Flashing a Zgemma H7

    I have a Zgemma H7 box with Openvix Image 5.3.039 I wish to update to new 5.4.003 image using my flash usb drive I've downloaded the new image H7 and put this on the usb I'm following the guide from this site. Each time I try to flash my box it just boots. What folders need to be on the usb names and contents please if someone can assist (H7 folder contains image version, kernel.bin and rootfs.tar.bz2)

  2. #2
    adm's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Sep 2014
    Location
    Southend on Sea, UK
    Posts
    1,697
    Thanks
    67
    Thanked 668 Times in 522 Posts
    Quote Originally Posted by Sagalout View Post
    I have a Zgemma H7 box with Openvix Image 5.3.039 I wish to update to new 5.4.003 image using my flash usb drive I've downloaded the new image H7 and put this on the usb I'm following the guide from this site. Each time I try to flash my box it just boots. What folders need to be on the usb names and contents please if someone can assist (H7 folder contains image version, kernel.bin and rootfs.tar.bz2)
    Assuming a storage device connected to the box, try the easier mode
    menu -> setup -> vix -> image manager ->press yellow to download (select openvix 5.4.003 -> after download press blue to flash
    Xtrend ET10K, 2 x satellite tuners 28.2 (Sky FTA), 2 x hybrid (UK Freeview), Zgemma H9S (satellite)

  3. The Following User Says Thank You to adm For This Useful Post:

    abu baniaz (29-11-20)

  4. #3
    BrokenUnusableAccount
    Quote Originally Posted by Sagalout View Post
    I have a Zgemma H7 box with Openvix Image 5.3.039 I wish to update to new 5.4.003 image using my flash usb drive I've downloaded the new image H7 and put this on the usb I'm following the guide from this site. Each time I try to flash my box it just boots. What folders need to be on the usb names and contents please if someone can assist (H7 folder contains image version, kernel.bin and rootfs.tar.bz2)
    @adm has given the simplest answer if your box is still working.

    If you want to stick to your original plan and flash from USB with the bootloader you must download the OpenViX image version with "recovery" in the name.
    You end up with just "disk.img" and "imageversion" in the "h7" folder.

  5. #4

    Title
    Member
    Join Date
    Aug 2012
    Posts
    36
    Thanks
    5
    Thanked 1 Time in 1 Post
    Quote Originally Posted by adm View Post
    Assuming a storage device connected to the box, try the easier mode
    menu -> setup -> vix -> image manager ->press yellow to download (select openvix 5.4.003 -> after download press blue to flash
    It has to be flashed I tried the menu back up All i get is Nothing to update

  6. #5

    Title
    Member
    Join Date
    Aug 2012
    Posts
    36
    Thanks
    5
    Thanked 1 Time in 1 Post
    Wrong reply to this
    Last edited by Sagalout; 29-11-20 at 17:27.

  7. #6
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,541
    Thanks
    6,517
    Thanked 9,224 Times in 6,287 Posts
    Quote Originally Posted by Sagalout View Post
    It has to be flashed I tried the menu back up All i get is Nothing to update
    Flashing and updating are two different processes. You have to flash, not update.

  8. The Following User Says Thank You to abu baniaz For This Useful Post:


  9. #7

    Title
    Member
    Join Date
    Aug 2012
    Posts
    36
    Thanks
    5
    Thanked 1 Time in 1 Post
    Downloaded H7 recovery Emma and loaded this onto my usb stick now shows Folder h7 which contains disk.img and imageversion Still when I insert the usb in the rear usb port switch on and then hold down button behind front panel is goes to boot Box is failing to recognise this file?

  10. #8

    Title
    ViX Beta Tester
    Join Date
    Apr 2011
    Location
    Ireland
    Posts
    2,051
    Thanks
    404
    Thanked 669 Times in 548 Posts
    Why are you not using the image manager?
    Zgemma H7S running OpenVIX 6.2, Darkmotor, Triax TD110 dish, Inverto Black Ultra dual lnb
    LG 50UM7450 4K TV, Pioneer VSX-534 Atmos AVR , Panasonic UB820 region free 4K Bluray & a PS4.

  11. The Following User Says Thank You to ronand For This Useful Post:


  12. #9
    BrokenUnusableAccount
    Quote Originally Posted by Sagalout View Post
    Downloaded H7 recovery Emma and loaded this onto my usb stick now shows Folder h7 which contains disk.img and imageversion Still when I insert the usb in the rear usb port switch on and then hold down button behind front panel is goes to boot Box is failing to recognise this file?
    @adm has the detailed the simplest method to flash.

    But if your box doesn't have a hard drive in it or isn't connected to the internet then...

    The USB stick needs to be 8GB or less and formatted as FAT32.

    The h7 folder needs in be in a zgemma folder that is on the USB stick.

    Hold the front panel button in as you apply power and continue holding it in until you see FLSH on the front panel display.
    Then wait until you see Boot on the display again (it takes several minutes).
    Last edited by BrokenUnusableAccount; 29-11-20 at 19:19.

  13. #10

    Title
    Member
    Join Date
    Aug 2012
    Posts
    36
    Thanks
    5
    Thanked 1 Time in 1 Post
    Thanks didn't realise i could do this in process now I had Vu prior to this and thought that was same


    Thanks For everyone's Help Now Done Thanks Again

  14. #11

    Title
    ViX Beta Tester
    Join Date
    Apr 2011
    Location
    Ireland
    Posts
    2,051
    Thanks
    404
    Thanked 669 Times in 548 Posts
    Even vu boxes can be done by this method. Much easier and you dont need to get out of the armchair.
    Zgemma H7S running OpenVIX 6.2, Darkmotor, Triax TD110 dish, Inverto Black Ultra dual lnb
    LG 50UM7450 4K TV, Pioneer VSX-534 Atmos AVR , Panasonic UB820 region free 4K Bluray & a PS4.

  15. #12
    adm's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Sep 2014
    Location
    Southend on Sea, UK
    Posts
    1,697
    Thanks
    67
    Thanked 668 Times in 522 Posts
    Quote Originally Posted by Sagalout View Post
    Thanks didn't realise i could do this in process now I had Vu prior to this and thought that was same


    Thanks For everyone's Help Now Done Thanks Again
    There are 3 methods of updating

    i) Software update - menu -> system -> sofware update BUT usually when there is a major change you have to USB reflash or use image manager.
    ii) Use image manager as detailed in post #2
    iii) Download the new image to a PC, unzip the image, put it on a USB stick and then insert the USB stick in the box and follow the re-flash documentation.
    Xtrend ET10K, 2 x satellite tuners 28.2 (Sky FTA), 2 x hybrid (UK Freeview), Zgemma H9S (satellite)

  16. The Following User Says Thank You to adm For This Useful Post:


  17. #13
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,541
    Thanks
    6,517
    Thanked 9,224 Times in 6,287 Posts
    Quote Originally Posted by adm View Post
    There are 3 methods of updating
    I beg to differ. Your examples only show 1 updating method. The other two are flashing methods.


    To complicate things further, there was a partition change on the Zgemma's in the last few months that requires a flash by USB.

  18. #14

    Title
    Senior Member
    Join Date
    May 2019
    Posts
    118
    Thanks
    15
    Thanked 34 Times in 30 Posts
    Quote Originally Posted by abu baniaz View Post
    I beg to differ. Your examples only show 1 updating method. The other two are flashing methods.


    To complicate things further, there was a partition change on the Zgemma's in the last few months that requires a flash by USB.
    Was the partition change only for VIX because with openatv on zgemma h9 combo I can still flash on the fly i,e, flash online. And I can still flash online and offline via multiboot menu.

    I did try software update on the 26 or 27th that screwed my machine ended up with red boot light, had to use recovery from usb to get me back to multiboot menu then I flashed a backup that was on my hard drive seen a few people talking about failed update on zgemma h9 combo on openatv forum.

  19. #15
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,541
    Thanks
    6,517
    Thanked 9,224 Times in 6,287 Posts
    No will be for all images. Another change by Zgemma has been the box model changes too.

    I don't know what you mean by Multiboot menu. I have a Multiboot Image Selector screen. Is that what you mean? If so, see the thread on PLI about the non-booting if receiver is not using the correct slots.

    The word "recovery" is misleading as it has nothing to do with recovery. However, it does contain the partitioning changes when applicable.

    On one of the other forums you frequent, there is a dislike for updating which is generally baseless. Whether you flash the latest image or update to the latest image, you will fetch the latest image files. However, some files are not part of image.

    ofgwrite (this is what is used by flash online (ATV), image manager (Vix), flash image (Pli) ) does not touch the partitioning stuff or even the manufacturer logo.

  20. The Following 2 Users Say Thank You to abu baniaz For This Useful Post:

    urie (30-11-20)

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.