Yes, my TV is 60Hz compatible, i can watch NASA TV UHD 60Hz no problem with the dish connected directly to the TV.
Attached a small video of Eurosport 4K from the DVB-C tuner
Sent from my iPhone using Tapatalk
Yes, my TV is 60Hz compatible, i can watch NASA TV UHD 60Hz no problem with the dish connected directly to the TV.
Attached a small video of Eurosport 4K from the DVB-C tuner
Sent from my iPhone using Tapatalk
Again no information - what is the refresh rate of Eurosport 4k and what are the settings on the zgemma? I don't have this channel here. Since most of use here use openvix there is no point using openatv as we cant help you with the settings. Install Openvix 5.3.034 and send a longer recording of Hotbird 4k1. Do not install the cam - just keep things simple. Set the video resolution to 2160p and refresh rate to multi.
Zgemma H7S running OpenVIX 6.2, Darkmotor, Triax TD110 dish, Inverto Black Ultra dual lnb
LG 50UM7450 4K TV, Pioneer VSX-534 Atmos AVR , Panasonic UB820 region free 4K Bluray & a PS4.
on the other page i posted a picture with my Zgemma video settings. i don t know the refresh rate of Eurosport 4K nor of the AXN HD channels.
i will install openvix image on slot 3 and return with answers to your questions
thank you
Those were the openatv settings which are different to openvix. Do not restore any settings - just scan the channels in on hotbird. In openvix if you press the OK button twice usually you can see the refresh rate (it depends on the skin used).
Zgemma H7S running OpenVIX 6.2, Darkmotor, Triax TD110 dish, Inverto Black Ultra dual lnb
LG 50UM7450 4K TV, Pioneer VSX-534 Atmos AVR , Panasonic UB820 region free 4K Bluray & a PS4.
switching to OpenVIX image impreved things:
- AXN HD channel works good now, as it should
- the output video settings have 50/60Hz settings now (instead of 25/30Hz on the OpenATV and egami)
but
still the image on Eurosport 4K is slow motion/with glitches
the image on Hotbird 4K1 is out of sync, sound is before image and image is like slow motion
LE: now watching Hotbird 4K1 with the content from "The Explorers" i don t see any issues
i have quite a nasty raining now and the only 4K channel on Hotbird 13 East that is working it s the Hotbird 4K1. The signal is too weak for Nas TV UHD or Fashion TV UHD to check them out
at this point i can only see this problem with the Eurosport 4K channel on my DVB-C subscription that is 50Hz and has HDR. maybe one of this two is the reason for my slow motion image and glitches (both audio and video) that i have on this channel, inserting the CAM in the TV slots works fine though ...............
now i have installed Kodi but i can t make it see my network server.......box is connected to the router by wire, internet is ok, lan connection is good. will do more research here
this is the issue i am talking about on HotBird 4K1
regarding Kodi, it still not playing the videos but the Plex addon works, it plays video but not all of them, guess it s a codec issue on Plex, not playing an 4K video from my plex server
LE: kodi plays the video just fine from the USB connected to the back of the box but won t start playing the video from the local server (SMB or FTP)
Last edited by dumitru.o; 07-06-20 at 20:25.
Its a very bad sync problem all right. I haven't had any such issues and I don't think anyone else has reported any such problem with the H9. Any problems I had were caused by my tv. Wait and see if any H9 owners see this thread and can offer some suggestions.
Zgemma H7S running OpenVIX 6.2, Darkmotor, Triax TD110 dish, Inverto Black Ultra dual lnb
LG 50UM7450 4K TV, Pioneer VSX-534 Atmos AVR , Panasonic UB820 region free 4K Bluray & a PS4.
i understand. thanks for all your time
H9 doesn't have a lot of flash memory, especially with Kodi.
I would be tempted to insert a large memory SD card into teh H9 and use the H9SDManager (in ViX plugin) to format and move the root to the SD card - you then have as much memory as basically is on the SD card.
After this you boot from the SDcard by long press power button and then selecting the SDcard
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
i think the H9 Combo has enough flash memory. does anyone with H9 Combo installed/tested Kodi app?
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K