Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 11 of 11

Thread: Zgemma H7s crashing every time I try & use; came from a vu duo2, have I been spoilt?

  1. #1
    ade1970's Avatar
    Title
    Member
    Join Date
    Aug 2013
    Posts
    95
    Thanks
    150
    Thanked 10 Times in 10 Posts

    Zgemma H7s crashing every time I try & use; came from a vu duo2, have I been spoilt?

    Hi all, had this box recommended, all seemed ok, started to migrate from vu duo2 last week, noticed boxed crashed for stupid things like flicking channel too fast with cable or satellite, whilst setting up recordings and yesterday whilst actually recording from satellite. It's driving me nuts, and to add insult to injury, currently caught in a perpetual boot loop, please see attached image ( I will learn how to attach a log soon) In meantime back to vu duo2 and just switched off the Zgemma. I really hope that this is as reliable as vu, I had enough problems with Azbox and Protek to last a lifetime and was hoping these sorts of crashes were a thing of the past..any help appreciated..and to surmise the pic, it keeps rebooting at 49% and says the device has run out of space.? I have installed a 2tb tosh 200 ssd. I put motorised settings on from plugins, could this have filled up the internal memory? or caused the crash???Presumably its a re-flash from usb? or can I fix this online? should I try another image, I love openvix, but I'd love a non-crashing box more...
    ps yesterday I finally got motorised dish and mono block fixed up...that all worked ok so even more surprised about silly crashes!..oh and the Zgemma pulled in channels from mono block that the duo2 couldn't highlighting that it definitely has a better more sensitive tuner in the Zgemma
    Attached Images Attached Images
    Zgemma H7S (from WofS) , 2TB Toshiba 2.5 HDD, 8GB Sandisk Usb Stick, 80cm Channel Master dish & Inverto 6 deg monoblock lnb single output -Astra & Hotbird, 1m Dish & H-H Dark Motor, usals, single 0.2 DB lnb, Oscam-latest, Openvix 6.2.002(or latest),ABM, EPG Importer, Minddlna, Transcoding- e2stream/pembo to Samsung H series smart tv. Skin: slyk-1080-r19, Kodi & Torrentplayer
    (LG Oled55cx5lb TV, Quad Vena Play, Project Recordmaster, Kef LS-50, SVS 2000, Echo Studio, Oculus Quest 2, MacBook Pro

  2. #2
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,618
    Thanks
    1,009
    Thanked 2,964 Times in 2,305 Posts
    So this box is really solid, so reflash and setup slowly. If you have a settings backup then restore settings but don‘t restore plugins. Make sure that all settings where applicable are set to you your HDD and not flash. Then slowly install plugins. I notice you use IPTV and have motorised dish so have you many bouquets - one user loaded up bouquets from all over the world filling flash.... so which plugins were you using???
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
    ------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
    .......................
    Vu+ Uno4KSE, Dreambox dm900
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
    Zgemma H9 C/S into Giga4K

  3. The Following User Says Thank You to twol For This Useful Post:

    ade1970 (15-05-20)

  4. #3

    Title
    Senior Member
    Join Date
    Jan 2016
    Posts
    132
    Thanks
    5
    Thanked 83 Times in 49 Posts
    The space full will be flash memory not the memory on the ssd. Which will cause issues.

    Easy to check via

    Menu - information - memory - free flash memory.

    Best bet as twol suggests is fresh flash the image, restore nothing.

    Then check free flash mem, add your plugins etc in stages and can cross check to flash mem as you do etc.

  5. The Following User Says Thank You to danny121pt For This Useful Post:

    ade1970 (15-05-20)

  6. #4

    Title
    Forum Supporter
    Donated Member
    Join Date
    Jun 2010
    Posts
    3,044
    Thanks
    1,373
    Thanked 433 Times in 397 Posts
    I would be checking where your epg is been saved as going to internal flash will make your box go this way.

  7. The Following User Says Thank You to cactikid For This Useful Post:

    ade1970 (15-05-20)

  8. #5
    malcolmp's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Aug 2013
    Posts
    333
    Thanks
    37
    Thanked 27 Times in 25 Posts
    Quote Originally Posted by danny121pt View Post
    The space full will be flash memory not the memory on the ssd. Which will cause issues.

    Easy to check via

    Menu - information - memory - free flash memory.

    Best bet as twol suggests is fresh flash the image, restore nothing.

    Then check free flash mem, add your plugins etc in stages and can cross check to flash mem as you do etc.
    My H9S has flash memory free 24 Mb is this enough? My EPG is stored on the HDD.
    Gigablue UHD UE4K (Openvix)
    80 cm 2 Universal LNBs (Hot Bird, Astra 19°) to DiSEqC then to Gigablue
    60 cm Sky Dish Quad LNB one cable direct to Sky HD+box, 2nd cable to DiSEqC then to Gigablue
    65 cm Dish (16°) to DiSEqC then to Gigblue
    Zgemma H7S (Openvix) Now used as a backup box
    Viark 4K Box

  9. #6
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,618
    Thanks
    1,009
    Thanked 2,964 Times in 2,305 Posts
    Quote Originally Posted by malcolmp View Post
    My H9S has flash memory free 24 Mb is this enough? My EPG is stored on the HDD.
    If you are not experiencing issues, don‘t panic......... this is not a typical issue
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
    ------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
    .......................
    Vu+ Uno4KSE, Dreambox dm900
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
    Zgemma H9 C/S into Giga4K

  10. #7
    ade1970's Avatar
    Title
    Member
    Join Date
    Aug 2013
    Posts
    95
    Thanks
    150
    Thanked 10 Times in 10 Posts
    Thank you so much Twol, and yes, it appears I must have actually filled the internal memory as I had not long put the motorised settings, epg & a few others onto internal flash! doh! ..will re-flash, just read up on usb procedure, same as vu tbf, and in future direct all plugin data to hdd just in case. Not using stalker yet, that's my next challenge as wasn't something I ended up doing on vu with Jedi after the Canadian site crash...
    Thanks again, thought I'd made an err, phew! Thanks to all the replies, love the support for an old boy like me, learning new tricks ;-)

    Quote Originally Posted by twol View Post
    So this box is really solid, so reflash and setup slowly. If you have a settings backup then restore settings but don‘t restore plugins. Make sure that all settings where applicable are set to you your HDD and not flash. Then slowly install plugins. I notice you use IPTV and have motorised dish so have you many bouquets - one user loaded up bouquets from all over the world filling flash.... so which plugins were you using???
    Zgemma H7S (from WofS) , 2TB Toshiba 2.5 HDD, 8GB Sandisk Usb Stick, 80cm Channel Master dish & Inverto 6 deg monoblock lnb single output -Astra & Hotbird, 1m Dish & H-H Dark Motor, usals, single 0.2 DB lnb, Oscam-latest, Openvix 6.2.002(or latest),ABM, EPG Importer, Minddlna, Transcoding- e2stream/pembo to Samsung H series smart tv. Skin: slyk-1080-r19, Kodi & Torrentplayer
    (LG Oled55cx5lb TV, Quad Vena Play, Project Recordmaster, Kef LS-50, SVS 2000, Echo Studio, Oculus Quest 2, MacBook Pro

  11. #8
    ade1970's Avatar
    Title
    Member
    Join Date
    Aug 2013
    Posts
    95
    Thanks
    150
    Thanked 10 Times in 10 Posts
    struggling with usb flash, my usual trusted 8gb sandisk, hp disk util'd it too in the end, still not working, am I right in using the usb version of h7 openvix? ..it seems ok, tried on all 3 rear usb's ..flashes up 'flash' for a fraction of a second then just sits there saying boot?? Any ideas?? should I try the emmc version?...tried a Kingston 32gb, booted into main so box didn't recognise it, even after hp disk formatting to fat32 too! Sorry if this has been asked before...
    Zgemma H7S (from WofS) , 2TB Toshiba 2.5 HDD, 8GB Sandisk Usb Stick, 80cm Channel Master dish & Inverto 6 deg monoblock lnb single output -Astra & Hotbird, 1m Dish & H-H Dark Motor, usals, single 0.2 DB lnb, Oscam-latest, Openvix 6.2.002(or latest),ABM, EPG Importer, Minddlna, Transcoding- e2stream/pembo to Samsung H series smart tv. Skin: slyk-1080-r19, Kodi & Torrentplayer
    (LG Oled55cx5lb TV, Quad Vena Play, Project Recordmaster, Kef LS-50, SVS 2000, Echo Studio, Oculus Quest 2, MacBook Pro

  12. #9
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,666
    Thanks
    23,604
    Thanked 26,081 Times in 7,641 Posts
    Quote Originally Posted by ade1970 View Post
    struggling with usb flash, my usual trusted 8gb sandisk, hp disk util'd it too in the end, still not working, am I right in using the usb version of h7 openvix? ..it seems ok, tried on all 3 rear usb's ..flashes up 'flash' for a fraction of a second then just sits there saying boot?? Any ideas?? should I try the emmc version?...tried a Kingston 32gb, booted into main so box didn't recognise it, even after hp disk formatting to fat32 too! Sorry if this has been asked before...
    A new USB flash must be done with the recovery_emmc.zip file. Non recovery zip file is for online flashing and multiboot slot flashing via image manager.
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Please help keep OpenViX online, donate HERE.
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  13. The Following 2 Users Say Thank You to Sicilian For This Useful Post:

    ade1970 (15-05-20)

  14. #10
    malcolmp's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Aug 2013
    Posts
    333
    Thanks
    37
    Thanked 27 Times in 25 Posts
    Quote Originally Posted by twol View Post
    If you are not experiencing issues, don‘t panic......... this is not a typical issue
    Non lately, deleted some plugins, Thanks for your answer.
    Gigablue UHD UE4K (Openvix)
    80 cm 2 Universal LNBs (Hot Bird, Astra 19°) to DiSEqC then to Gigablue
    60 cm Sky Dish Quad LNB one cable direct to Sky HD+box, 2nd cable to DiSEqC then to Gigablue
    65 cm Dish (16°) to DiSEqC then to Gigblue
    Zgemma H7S (Openvix) Now used as a backup box
    Viark 4K Box

  15. #11
    ade1970's Avatar
    Title
    Member
    Join Date
    Aug 2013
    Posts
    95
    Thanks
    150
    Thanked 10 Times in 10 Posts
    Thank you so much Sicilian, that done the trick! Currently setting all back up..this box is quick! Anyone can confirm on 5w multi stream channels have to be put in manually? Also, icons going on hdd not internal...think I found my earlier culprit! Thanks again :-)

    Quote Originally Posted by Sicilian View Post
    A new USB flash must be done with the recovery_emmc.zip file. Non recovery zip file is for online flashing and multiboot slot flashing via image manager.
    Zgemma H7S (from WofS) , 2TB Toshiba 2.5 HDD, 8GB Sandisk Usb Stick, 80cm Channel Master dish & Inverto 6 deg monoblock lnb single output -Astra & Hotbird, 1m Dish & H-H Dark Motor, usals, single 0.2 DB lnb, Oscam-latest, Openvix 6.2.002(or latest),ABM, EPG Importer, Minddlna, Transcoding- e2stream/pembo to Samsung H series smart tv. Skin: slyk-1080-r19, Kodi & Torrentplayer
    (LG Oled55cx5lb TV, Quad Vena Play, Project Recordmaster, Kef LS-50, SVS 2000, Echo Studio, Oculus Quest 2, MacBook Pro

  16. The Following User Says Thank You to ade1970 For This Useful Post:

    cactikid (15-05-20)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.