Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 15 of 15

Thread: ZG H7c stuck on Boot

  1. #1
    deejayh

    Exclamation ZG H7c stuck on Boot

    Hi all,

    I had a notification to upgrade, after restarting the box, it was on, but couldn't get a menu up. rebooted half a dozen times - without success!

    So as I had some other images on, I went to reboot into another image - but i had no menu.

    So I had a stupid brain fart - I would change the boot startup folder to say OpenATV. So I edited the startup file - Copied START_2 to START
    boot emmcflash0.linuxkernel2 'brcm_cma=440M@328M brcm_cma=192M@768M root=/dev/mmcblk0p8 rootsubdir=linuxrootfs2 kernel=/dev/mmcblk0p4 rw rootwait h7_4.boxmode=1'
    I then rebooted and NOTHING. All it was showing was BOOT
    So I got a USB out and copied the zgemma folder onto the USB - Held in pushbutton - BOOT - that was all!! Arrhhhhhh!!
    Tried 3 more different USB - all the same - NOTHING
    Tried reformatting USBs with windows then Partition Wizard - NOTHING!
    Tried OpenATV, Vix, Pure2 - NOTHING WORKS!!!! ARRRRRHHHHH!!

    Been at this for over a week!

    Can anyone help and advise please
    Thanks
    Last edited by deejayh; 11-05-20 at 16:16.

  2. #2
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts

    ZG H7c stuck on Boot

    Some changes have happened to the recovery emmc part. Image & recovery emmc files here >> https://www.openvix.co.uk/index.php/...ges/zgemma-h7/

    Read this thread which will help you I think >> How to USB flash New Multi-boot recovery menu and Image - New procedure 21/04/2020
    https://r.tapatalk.com/shareLink/top...ink_source=app


    Sent from my iPhone using Tapatalk
    Last edited by Andy_Hazza; 11-05-20 at 16:33.
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

  3. The Following 2 Users Say Thank You to Andy_Hazza For This Useful Post:

    cactikid (11-05-20)

  4. #3
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,618
    Thanks
    1,009
    Thanked 2,964 Times in 2,305 Posts
    Quote Originally Posted by deejayh View Post
    Hi all,

    I had a notification to upgrade, after restarting the box, it was on, but couldn't get a menu up. rebooted half a dozen times - without success!

    So as I had some other images on, I went to reboot into another image - but i had no menu.

    So I had a stupid brain fart - I would change the boot startup folder to say OpenATV. So I edited the startup file - Copied START_2 to START

    I then rebooted and NOTHING. All it was showing was BOOT
    So I got a USB out and copied the zgemma folder onto the USB - Held in pushbutton - BOOT - that was all!! Arrhhhhhh!!
    Tried 3 more different USB - all the same - NOTHING
    Tried reformatting USBs with windows then Partition Wizard - NOTHING!
    Tried OpenATV, Vix, Pure2 - NOTHING WORKS!!!! ARRRRRHHHHH!!

    Been at this for over a week!

    Can anyone help and advise please
    Thanks
    So I assume you actually had an image installed in slot 2??? which is where it was booting.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
    ------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
    .......................
    Vu+ Uno4KSE, Dreambox dm900
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
    Zgemma H9 C/S into Giga4K

  5. #4
    deejayh

    Exclamation

    Yes twol Thanks

    Andy_Hazza Thanks for the reply and information

    I have literally tried everything and was contemplating trashing it and buying another ZG H7c

    But I have been searching everywhere (as just changing 3 things in that START file has damaged it beyond repair?!!) Crazy

    Anyway I ran up against this - http://www.pur-e2.club/OU/images/ind...7-2partitions/
    Yes Yes I know it is Pur-e2 - but soon as I put this on the USB into the H7 - off it went and chopped the 4 image slots into 2!

    Absolutely brilliant guys, what a lifesaver

    Guys once again for your help

  6. #5
    deejayh
    Quote Originally Posted by Andy_Hazza View Post
    Some changes have happened to the recovery emmc part. Image & recovery emmc files here >> https://www.openvix.co.uk/index.php/...ges/zgemma-h7/

    Read this thread which will help you I think >> How to USB flash New Multi-boot recovery menu and Image - New procedure 21/04/2020
    https://r.tapatalk.com/shareLink/top...ink_source=app
    Sorry but the last link directed me saying I do not have the permissions to view!! Arhhh

  7. The Following User Says Thank You to deejayh For This Useful Post:

    cactikid (11-05-20)

  8. #6

    Title
    Forum Supporter
    Donated Member
    Join Date
    Jun 2010
    Posts
    3,044
    Thanks
    1,373
    Thanked 433 Times in 397 Posts
    Just checked that link and also cannot view as it might be staff only or mods can.

  9. #7
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,618
    Thanks
    1,009
    Thanked 2,964 Times in 2,305 Posts
    Quote Originally Posted by deejayh View Post
    Yes twol Thanks

    Andy_Hazza Thanks for the reply and information

    I have literally tried everything and was contemplating trashing it and buying another ZG H7c

    But I have been searching everywhere (as just changing 3 things in that START file has damaged it beyond repair?!!) Crazy

    Anyway I ran up against this - http://www.pur-e2.club/OU/images/ind...7-2partitions/
    Yes Yes I know it is Pur-e2 - but soon as I put this on the USB into the H7 - off it went and chopped the 4 image slots into 2!

    Absolutely brilliant guys, what a lifesaver

    Guys once again for your help
    Unless PureE2 have done something really stupid, you should be able to use FlashOnline to flash a OpenViX image into the second slot and it should recognise that there are only 2 slots to play with.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
    ------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
    .......................
    Vu+ Uno4KSE, Dreambox dm900
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
    Zgemma H9 C/S into Giga4K

  10. #8
    deejayh
    sorry catkid, maybe its for logged in users?
    .
    PurE2_Download_-_2020-05-12_13.09.54.jpg

  11. #9
    deejayh
    twol

    Dont forget, I was running nothing and could get nothing mate!!
    They fortunately had this to put onto a USB and load it on my system! As everything had failed (on all systems to run any package!!)

    Cheers

  12. #10
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,618
    Thanks
    1,009
    Thanked 2,964 Times in 2,305 Posts
    Quote Originally Posted by deejayh View Post
    twol

    Dont forget, I was running nothing and could get nothing mate!!
    They fortunately had this to put onto a USB and load it on my system! As everything had failed (on all systems to run any package!!)

    Cheers
    Yes, I realise that, but all I am saying is that you now should be able to flash ViX from PureE2 into a slot.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
    ------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
    .......................
    Vu+ Uno4KSE, Dreambox dm900
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
    Zgemma H9 C/S into Giga4K

  13. The Following 2 Users Say Thank You to twol For This Useful Post:

    Andy_Hazza (12-05-20)

  14. #11

    Title
    Senior Member
    Join Date
    May 2019
    Posts
    118
    Thanks
    15
    Thanked 34 Times in 30 Posts
    Quote Originally Posted by deejayh View Post
    sorry catkid, maybe its for logged in users?
    .
    PurE2_Download_-_2020-05-12_13.09.54.jpg
    I thnk he was referring to link Andy_Hazza posted none of us can view it.

  15. #12
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts
    Ah soz, was Dev link. Apologies.


    Sent from my iPhone using Tapatalk
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

  16. The Following User Says Thank You to Andy_Hazza For This Useful Post:


  17. #13

    Title
    Junior Member
    Join Date
    Sep 2013
    Posts
    21
    Thanks
    4
    Thanked 5 Times in 3 Posts
    Hello

    I seem to have the same problem as the OP in this thread. I just started using my ZGemma H7S yesterday. It came from WOS with OpenATV 6.4 installed. I wanted to try OpenATV 6.3 so downloaded it from the Software Manager menu and put it in (I think?) slot 2 and then asked it to boot into that and copy over the settings from OpenATV 6.4. However after restarting I juts have a black screen on the TV. It doesn't seem to boot up. I tried putting OpenATV 6.3 image files in a folder called 'zgemma' on a fat32 formatted usb key in the back of the box. As soon as I power it on I press the power button on the front of the box and I think it's supposed to cycle through boot, usb, flash. I see flash appear and disappear in about half a second so I don't know when to release the power button to start flashing the image then it gets stuck on "BOOT" on the LED screen and nothing else happens.

    How can I get my box to boot an image again?

    Cheers,

    Flex

  18. #14

    Title
    Forum Supporter
    Donated Member
    Join Date
    Mar 2014
    Location
    UK
    Posts
    163
    Thanks
    36
    Thanked 6 Times in 6 Posts
    Hi guys old thread I know, but this multiboot recovery sounds like it can be incredibly useful in bad situations, can I ask why the H9 multi boot recovery is available but the H7 is restricted to a hidden dev area?

    Thanks.
    Zgemma H7S, internal 2tb WDC WD20NPVZ-00W HDD, ViX as below
    System OE: OE-Alliance 4.4
    Firmware version: OpenViX 5.4.013 (2021-06-24)
    Kernel / Drivers: 4.10.12 / 20191123

  19. #15

    Title
    ViX Beta Tester
    Join Date
    Apr 2011
    Location
    Ireland
    Posts
    2,051
    Thanks
    404
    Thanked 669 Times in 548 Posts
    The recoverymmc files are on the openvix site for everyone to access.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.