I have set up my box in client mode , do I have to download epg on both boxes or just the main box?
I have set up my box in client mode , do I have to download epg on both boxes or just the main box?
i do it on my client as well , but i'll probably get told i'm wrong
daz450 (04-05-20)
No should not have to as it takes it from the master box to your slave box channels and epg.
Is your client box in daily use as mine is or once in a week?
son's, kitchen, bedroom in daily use. Set to import every 3hrs ( if you were asking me ) I must switch them on at 2hrs 55min LOL
cactikid (05-05-20)
Picture on client box is poor is there a way to send a better quality stream to it ?
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Yes it is a 4k TV with hdmi 2.0 lead and the box is a zgemma H9 twin.
Last edited by daz450; 12-05-20 at 20:23.
The menus look grainy and FHD channels looks like 570p
I’d check all your cabling as sounds like a dodgy connection somewhere. What settings have you used on your Client box? Double check that you have selected HDMI, 1080i, Multi Refresh Rate etc. Something is a miss with your setup somewhere.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Updated both boxes now working fine, thanks
Andy_Hazza (12-05-20),cactikid (12-05-20)
In this case, the most important thing is to have a current system update.