Which version of Vix please - be precise!
SO flashed from which version to which version?
Can you also give me a screen shot - use the web interface its easier.
Which version of Vix please - be precise!
SO flashed from which version to which version?
Can you also give me a screen shot - use the web interface its easier.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Installed openatv 6.2 into slot 2. Openvix reboots but the LCD panel on front says boot and it doesn't do anything.
maybe you added a LCD skin that crashed , hence display is blank
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
So power off, remove the sdcard and it should boot into slot 1.
Then menu/info .. confirm what version is running.
Put into deep standby , reinsert teh sdcard, power up.
Then long press power button, multiboot and see what the system thinks is on the slots
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Originally Posted by Coldfire
?? You cannot add a skin as it is just a number LCD.[/quote]
sorry.
Says successfully flashed and then rebooting box. The boot shows on LCD and the screen shows the satellite image and thengoes black and back to the satellite image
Taken the SD card out and still doesn't boot
Ok so powered on pressing power button and then selected slot 2. Booted into openatv setup and then longer pressed power button went to multiboot and selected slot 1 and it booted openvix but going to multiboot in openvix and selected slot 2 it will get stuck in a boot loop again and will not boot
Well it should do! But no help to you.
I have just tried and works perfectly for me ...... put the sd card back in and reboot and boots to the sd card.
So you will have to usb flash the latest ViX then turn on debug logs and save them to usb.
Flash ATV to slot 2 and if it fails then pull off the log from the usb (will be in logs directory) via PC and post here please.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
It doesn't fail the install it just doesn't boot when it reboots.