Hi
Small niggling issue, installed my HDD 2 pin power etc all cabled. However when i power up my box nothing. Blanks screen no boot up. Remove the power to the HDD and all back to normal.
Any ideas?
Thanks
Hi
Small niggling issue, installed my HDD 2 pin power etc all cabled. However when i power up my box nothing. Blanks screen no boot up. Remove the power to the HDD and all back to normal.
Any ideas?
Thanks
You could try formatting the HDD separately to exFAT, then try again.
If that does not work, try another HDD.
The HDD is probably marked as having errors. An attempt is made to clean/fix before booting. Try formatting it in a PC first. Fat32 is better as receiver will mount it without having to install drivers.
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
not if you format it when in the box to EXT xxx
VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
Triax 88 cm rotor single LNB 30 E- 40 W
1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E
normaly not but already had HDD's that needed to be reformatted on PC before beeing recognized by the boxes.
VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
Triax 88 cm rotor single LNB 30 E- 40 W
1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD
Thanks all it would appear that the power part of the sata cable was at fault. The unit now powers up as expected.
Thanks all