Hi Guys
I flashed my Vu box, with the latest openvix image. When using ABM it keeps giving me the message. It is for the netid 00013.
I have checked all the settings. Can't find anything obvious.
Thanks
Sent from my SM-A520F using Tapatalk
Hi Guys
I flashed my Vu box, with the latest openvix image. When using ABM it keeps giving me the message. It is for the netid 00013.
I have checked all the settings. Can't find anything obvious.
Thanks
Sent from my SM-A520F using Tapatalk
Try netid 00000 and do a full manual scan. Try different VM providers to get all the channels.
check this thread mate we from same netid
http://www.world-of-satellite.com/sh...onto-frequency
Delboy13 which thread mate?
Sent from my SM-A520F using Tapatalk
sorry mate linked back to this thread in above post
http://www.world-of-satellite.com/sh...g-Failed-Fatal
:unable to find frequency error when scanning cable with auto bouquets ?
trying to scan 00001 west yorks but getting message (tuning failed unable to lock onto frequency?
Thank you for a better description.
Maybe another change of frequencies being used.
Delete the cable services.
Channel Up > Green (satellites) highlight cable > Menu > Remove cable services > confirm > restart
Scan for cable services (not using ABM) > restart
Upload both your lamedb and lamedb5 to this post. You will find them in /etc/enigma2/ You will have to zip them before you can upload.
Last edited by abu baniaz; 10-10-17 at 20:15. Reason: maybe instead of more then likely
sorry had to disable 1 tuner as 1 cable not working how do I set everything to save to hdd instead of flash?
Last edited by abu baniaz; 10-10-17 at 20:15.
in EPG settings there are no options at all , there should be an option to save epg to hdd instead of flash
Your questions have nothing to do with this thread title.
Do you mind starting your own thread? Please provie as much detail as possible. People can only help based on the information your post. If you don't type it, nobody knows. I was going to ask, which receiver, which image. BUt you can add those details in your new thread.