Is there an alternative to CrossEpg?
If so, could someone give me a download?
Also, how would I send it to my receiver using DCC?
Is there an alternative to CrossEpg?
If so, could someone give me a download?
Also, how would I send it to my receiver using DCC?
What isn't crossepg doing for you?
Vix image (usually latest) - VU Solo 4K- WD 1TB INTERNAL HDD - DVB-T Freeview, trialling IPTV options
If my response has helped you, don't forget to hit the thanks button below. I appreciate you appreciate me
I downloaded it from Plugins.
It only updates for about 2 seconds, so all I have in the EPG is now & next.
I even sent one to my receiver & the same happened.
I also had it configured, but no joy.
I think it may be down to my new receiver which is an Edision OS Mini+.
I think there is a thing called XMLTV or some name like that which some people use.
How are you connected? Satellite dish (what satellite?) or terrestrial or cable? CrossEPG will give you 7 day EPG for SKY/Freesat in UK/Ireland if you select the 28.2 OpenTV provider. Best not to mix over-the-air feed with Rytec from internet if you are using OpenTV as you will duplicate a lot of info.
GB Quad Plus, Mut@nt HD51, AX HD61, 80cm dish and Supreme Dark motor. Sony TA-AN1000, Sony UBP-X800M2 Bluray, Odroid N2+ (CoreElec), Monitor Audio Bronze 5.1 speakers
I'm using a satellite dish but I can't get the Crossepg to update for 7 days.
It's in plugins but when I select it all it does is loading data for 2 seconds & that's it.
All I have now is now & next, so I don't know why it's doing this.
Have you selected a provider in CrossEPG? In the CrossEPG menu click on OpenTV Providers, then you will see SKY OpenTV, select (green tick) and then green button to save. Run "Download now" and it should populate your EPG for 7 days.
GB Quad Plus, Mut@nt HD51, AX HD61, 80cm dish and Supreme Dark motor. Sony TA-AN1000, Sony UBP-X800M2 Bluray, Odroid N2+ (CoreElec), Monitor Audio Bronze 5.1 speakers
Have you got a USB stick. Make sure you are saving your EPG to the USB stick and not to the flash memory.
Sent from my iPhone using Tapatalk
What receiver do you have?
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
That's just the problem.
When I click on it no other menu opens up.
It just says loading for about 2 seconds.
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Image = openHDF v5.5
Open Source = https://github.com/openhdf
Go to menu-system-setup-epg and then setup cross epg from there
Sent from my iPhone using Tapatalk
Receiver is Edision OS Mini+.
You might be better flashing openvix
http://www.openvix.co.uk/index.php/d...-os-mini-plus/
Sent from my iPhone using Tapatalk
Thanks for the help guys.
I found EPG importer in the plugins & I selected Rytec UK & it's fine now.
Once again, thanks.