how and where do i install cccam too please
how and where do i install cccam too please
Have you tried every available image today?
Menu > Plugins > Green button
Then menu > Setup > Softcam
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
bassethound (12-11-10)
Download via plugins under cams restart gui then add your CCcam.cfg via ftp to "etc folder then menu/setup/softcam ci/softcam setup select which cccam you have installed and activate it then select autostart DONE!!!!!!!
All PM,s asking about c/s on cable will be ignored and reported to forum staff!
Sicilian (12-11-10)
sicillian , yeh i have tried all nearly images today, alot of them are a ball ache, the pod image is a nightmare, blackhole wouldnt let me install cccam, so gone back to vix image, but for sd pic blackhole is far the best pic quality, vix has a grainy look on sd pics, but got vix running now, but just installed vhannables settings and 16e wont work now, having probs with thas sat, and before on other images i was getting this, any ideas sic the man
What are the video enhancement settings of the Blackhole image as default?
Both images have the same base, prob just a tweak in settings to match.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
yeh as default and all i did was install auto resolution, on blackhole and had them as default,and done the same on the vix image, but on the vix i have alot more freezes than the blackhole too,
Hmmm
well mate! i've had linux boxes for many years, used a whole mass of different images, picture quality on all of them has been much of a muchness, i have never used the resolution setup on any of them, and things look ok to me, when the bit rate is decent so is the PQ and on HD it can look superb, on the other hand when the bit rate is low SD pictures do look grainy, clouded, etc, this has nothing to do with the image.
bottom line is i now use the VIX image there's nothing in it or on it, that is anything worse than any other image, in actual fact i'd go as far to say it's amongst the best, pictures when the output is good are excellent, i use a plasma display and have and no problems whatsoever with Picture Resolution, and as i say i dont engage the setup.
i hope this help in some way.
regards: canthackit
Last edited by canthackit; 12-11-10 at 18:40.
bassethound (12-11-10)
i have a panasonic 42 inch plasma canthackit m8 and another few people on other forums have said images do make the difference, the vix first image when it came out was spot on, but had a few niggles that was annoying, but pic wise it was spot on, now as we go further into later images it has gone worse on sd pics, now it is not just this image, alot of the other images are the same, blackhole for some reason, is really sharp on pics, i dont know about pod images, because i hit a wall on that image, pli was ok, but kept green screening, and vti was green screening alot too, now on the latest vix image i cant seem to get 16e, i dont know why i still havent solved it yet ?
Hi mate
When it comes to picture quality on sd or hd its only as good as what it was shot in, if your looking at ukgold for instant the pq in sd is bad due to the age of the content its showing, I have always found new studio produced shows in hd to be sharp and bright by all means play with the vu or tv settings but when u zap from channel to channel your always be taking that second look. I must admit i try to steer away from watching sd channels lately because of the poor quality.
regards
satmanbasil
RE the problem with 16E your settings are probably for 16E and you sat.xml is for 15.8E
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM
IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ↓
I am actually running the BH 1.39c and using the CCcam 2.14, I copied my CCcam.cfg file across and its running as well as the Vix image I was running previously. I have to add that I am only running my VU+ only as client so I cannot comment on the CCcaminfo.