Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 1 of 3 123 LastLast
Results 1 to 15 of 34

Thread: Standby problem

  1. #1
    01342

    Standby problem

    Hi,

    I have a problem with a Solo, bought about 2 weeks ago from the sponsor with VIX preloaded.
    At night I turn it onto standby and the next day I can't get it out of standby without unplugging then plugging back in.
    Any ideas?

    Cheers,

    Keith

  2. #2
    mickyblueys's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Sep 2012
    Location
    Newcastle upon Tyne
    Posts
    1,086
    Thanks
    85
    Thanked 217 Times in 188 Posts

    Re: Standby problem

    Mods would need to see debug logs to give you a good idea of problem. Switch them on and post them here.


    Sent from my GT-I9100 using Tapatalk 2
    Vu+Duo
    Vix Hades
    WD 1TB Blue Desktop Drive 3.5" SATA-III 7200RPM 64MB =Cross EPG & 256mb Swap File
    Kingston DataTraveler SE9 8GB USB =PTS


    Vu+Duo
    Vix Hades
    Seagate 500GB 3.5" SATA-III 6Gb/s Barracuda Hard Drive 7200RPM 16MB=Cross EPG & 256mb Swap File
    Kingston DataTraveler SE9 8GB USB =PTS

    Both Duo's Plugins, Lraizer Autobouquet, Cacheflush, Mediascanner, Picture player, Movie Browser & Openwebif

  3. The Following User Says Thank You to mickyblueys For This Useful Post:


  4. #3
    01342
    Thanks,

    I can see where the logs should be, /home/root but how do you turn them on?

    Cheers,

    Keith.

  5. #4
    mickyblueys's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Sep 2012
    Location
    Newcastle upon Tyne
    Posts
    1,086
    Thanks
    85
    Thanked 217 Times in 188 Posts

    Re: Standby problem

    Menu-setup-system-logs

    Go into settings, select location to save, easier to have set to usb or hdd.

    Then turn enable debug log on.

    Input you're w-o-s. Username and email and you can send future logs direct to forum from box.

    Sent from my GT-I9100 using Tapatalk 2
    Last edited by mickyblueys; 01-04-13 at 12:56.
    Vu+Duo
    Vix Hades
    WD 1TB Blue Desktop Drive 3.5" SATA-III 7200RPM 64MB =Cross EPG & 256mb Swap File
    Kingston DataTraveler SE9 8GB USB =PTS


    Vu+Duo
    Vix Hades
    Seagate 500GB 3.5" SATA-III 6Gb/s Barracuda Hard Drive 7200RPM 16MB=Cross EPG & 256mb Swap File
    Kingston DataTraveler SE9 8GB USB =PTS

    Both Duo's Plugins, Lraizer Autobouquet, Cacheflush, Mediascanner, Picture player, Movie Browser & Openwebif

  6. The Following User Says Thank You to mickyblueys For This Useful Post:


  7. #5
    01342
    So I've done all that. I should now wait till tomorrow to see what log is there?

    Cheers,

    Keith.

  8. #6
    mickyblueys's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Sep 2012
    Location
    Newcastle upon Tyne
    Posts
    1,086
    Thanks
    85
    Thanked 217 Times in 188 Posts

    Re: Standby problem

    Quote Originally Posted by 01342 View Post
    So I've done all that. I should now wait till tomorrow to see what log is there?

    Cheers,

    Keith.
    Yes or try and replicate the problem now through testing......but probably easier to wait and see if it will happen again. If it does and you can't wake the box send (and post to this thread just incase) the last debug log (date and time wise) for a mod to help.

    Sent from my GT-I9100 using Tapatalk 2
    Vu+Duo
    Vix Hades
    WD 1TB Blue Desktop Drive 3.5" SATA-III 7200RPM 64MB =Cross EPG & 256mb Swap File
    Kingston DataTraveler SE9 8GB USB =PTS


    Vu+Duo
    Vix Hades
    Seagate 500GB 3.5" SATA-III 6Gb/s Barracuda Hard Drive 7200RPM 16MB=Cross EPG & 256mb Swap File
    Kingston DataTraveler SE9 8GB USB =PTS

    Both Duo's Plugins, Lraizer Autobouquet, Cacheflush, Mediascanner, Picture player, Movie Browser & Openwebif

  9. #7
    mickyblueys's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Sep 2012
    Location
    Newcastle upon Tyne
    Posts
    1,086
    Thanks
    85
    Thanked 217 Times in 188 Posts

    Re: Standby problem

    What version and build number was pre installed for you?

    Menu-information-about

    Sent from my GT-I9100 using Tapatalk 2
    Vu+Duo
    Vix Hades
    WD 1TB Blue Desktop Drive 3.5" SATA-III 7200RPM 64MB =Cross EPG & 256mb Swap File
    Kingston DataTraveler SE9 8GB USB =PTS


    Vu+Duo
    Vix Hades
    Seagate 500GB 3.5" SATA-III 6Gb/s Barracuda Hard Drive 7200RPM 16MB=Cross EPG & 256mb Swap File
    Kingston DataTraveler SE9 8GB USB =PTS

    Both Duo's Plugins, Lraizer Autobouquet, Cacheflush, Mediascanner, Picture player, Movie Browser & Openwebif

  10. #8
    01342
    Quote Originally Posted by mickyblueys View Post
    What version and build number was pre installed for you?

    Menu-information-about

    Sent from my GT-I9100 using Tapatalk 2
    3.0 632

    I'll see what happens overnight

    Cheers,

    Keith

  11. #9
    mickyblueys's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Sep 2012
    Location
    Newcastle upon Tyne
    Posts
    1,086
    Thanks
    85
    Thanked 217 Times in 188 Posts

    Re: Standby problem

    you can set a power timer to turn box to deep standby at night then to wake to normal standby our even wake up completely in the morning. This is good for power saving. Have a look in menu-timers-powertimers

    Sent from my GT-I9100 using Tapatalk 2
    Vu+Duo
    Vix Hades
    WD 1TB Blue Desktop Drive 3.5" SATA-III 7200RPM 64MB =Cross EPG & 256mb Swap File
    Kingston DataTraveler SE9 8GB USB =PTS


    Vu+Duo
    Vix Hades
    Seagate 500GB 3.5" SATA-III 6Gb/s Barracuda Hard Drive 7200RPM 16MB=Cross EPG & 256mb Swap File
    Kingston DataTraveler SE9 8GB USB =PTS

    Both Duo's Plugins, Lraizer Autobouquet, Cacheflush, Mediascanner, Picture player, Movie Browser & Openwebif

  12. The Following User Says Thank You to mickyblueys For This Useful Post:


  13. #10
    01342
    Quote Originally Posted by mickyblueys View Post
    you can set a power timer to turn box to deep standby at night then to wake to normal standby our even wake up completely in the morning. This is good for power saving. Have a look in menu-timers-powertimers

    Sent from my GT-I9100 using Tapatalk 2

    Thanks, I'll look at those once I get this other prob sorted. Last night I put it into standby and when I woke the green light was on. This is the other prob I have. When this happens there is no volume, I have to switch to standby then back on. When this happens the EPG is not up to date. I think both problems must be related and related to the EPG update. So either it won't turn on but the EPG is up to date or it's already turned itself on but with no sound and the EPG is wrong. I can't paste in the log, the forum tells me too many characters

    Cheers,

    Keith.

  14. #11
    mickyblueys's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Sep 2012
    Location
    Newcastle upon Tyne
    Posts
    1,086
    Thanks
    85
    Thanked 217 Times in 188 Posts

    Re: Standby problem

    Do you have your epg set to update during the night? Whilst the box is in standby mode?



    Sent from my GT-I9100 using Tapatalk 2
    Vu+Duo
    Vix Hades
    WD 1TB Blue Desktop Drive 3.5" SATA-III 7200RPM 64MB =Cross EPG & 256mb Swap File
    Kingston DataTraveler SE9 8GB USB =PTS


    Vu+Duo
    Vix Hades
    Seagate 500GB 3.5" SATA-III 6Gb/s Barracuda Hard Drive 7200RPM 16MB=Cross EPG & 256mb Swap File
    Kingston DataTraveler SE9 8GB USB =PTS

    Both Duo's Plugins, Lraizer Autobouquet, Cacheflush, Mediascanner, Picture player, Movie Browser & Openwebif

  15. #12
    01342
    Quote Originally Posted by mickyblueys View Post
    Do you have your epg set to update during the night? Whilst the box is in standby mode?



    Sent from my GT-I9100 using Tapatalk 2
    Yep, and bouquet update

  16. #13
    mickyblueys's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Sep 2012
    Location
    Newcastle upon Tyne
    Posts
    1,086
    Thanks
    85
    Thanked 217 Times in 188 Posts

    Re: Standby problem

    You might find the plugin cache flush may help you, do a search on this forum it is posted somewhere. It may even be on the feeds now,I think.

    Also set a power timer like I said earlier. I have mine to goto deep standby at 01:00 then to wake to standby at 07:00. Daily.
    I then have bouquet set to update at 07:05 then epg to update at 07:10.
    With these settings and the cache flush I rarely have issues with the box powering up now, where as I used to have problems daily similar to you're own.


    Sent from my GT-I9100 using Tapatalk 2
    Vu+Duo
    Vix Hades
    WD 1TB Blue Desktop Drive 3.5" SATA-III 7200RPM 64MB =Cross EPG & 256mb Swap File
    Kingston DataTraveler SE9 8GB USB =PTS


    Vu+Duo
    Vix Hades
    Seagate 500GB 3.5" SATA-III 6Gb/s Barracuda Hard Drive 7200RPM 16MB=Cross EPG & 256mb Swap File
    Kingston DataTraveler SE9 8GB USB =PTS

    Both Duo's Plugins, Lraizer Autobouquet, Cacheflush, Mediascanner, Picture player, Movie Browser & Openwebif

  17. The Following User Says Thank You to mickyblueys For This Useful Post:


  18. #14
    mickyblueys's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Sep 2012
    Location
    Newcastle upon Tyne
    Posts
    1,086
    Thanks
    85
    Thanked 217 Times in 188 Posts

    Re: Standby problem

    Regarding you're log, attach the log don't paste it,

    Sent from my GT-I9100 using Tapatalk 2
    Vu+Duo
    Vix Hades
    WD 1TB Blue Desktop Drive 3.5" SATA-III 7200RPM 64MB =Cross EPG & 256mb Swap File
    Kingston DataTraveler SE9 8GB USB =PTS


    Vu+Duo
    Vix Hades
    Seagate 500GB 3.5" SATA-III 6Gb/s Barracuda Hard Drive 7200RPM 16MB=Cross EPG & 256mb Swap File
    Kingston DataTraveler SE9 8GB USB =PTS

    Both Duo's Plugins, Lraizer Autobouquet, Cacheflush, Mediascanner, Picture player, Movie Browser & Openwebif

  19. The Following User Says Thank You to mickyblueys For This Useful Post:


  20. #15
    01342
    Quote Originally Posted by mickyblueys View Post
    Regarding you're log, attach the log don't paste it,

    Sent from my GT-I9100 using Tapatalk 2
    I'll try what you've suggested, thanks.
    Log attached.

    Cheers,

    Keith.
    Attached Files Attached Files

Page 1 of 3 123 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.