Hey all , Me again !!!! Yeh so I decided to purchase the Unicable LMB and got a GT S2dCSS24, I had to purchase from Amazon sadly as world of satalite were out of them. I also purchased the bracket so I could attach this to my Sky Dish.

Images :-

20230421_094132.jpg

20230421_094118.jpg

So I chose a wet day to fit the damn thing and as I am unwell I struggled a bit but managed to get it up there (On top of roof) and also wire it in. I changed the settings as per this information from here (Thanks Abu Great work ont this !) :-

https://www.world-of-satellite.com/s...-configuration


I then test the signal & nothing at all in the signal finder (Main Menu/Setup/Signal finder) and everything on 0% No SNR , no AGB nothing at all. A bit confused I decided to connect the Tuner B for now to the Legacy port (There is 2 on the LNB) as I assume this works as normal ?? Either way I came back in and nothing at all. Now I assume I would have to play with the LNB to get the best signal (Move a bit check signla , Move a big , check signal ect ect) But I am getting nothing at all no matter what I do.

The only thing I did notice is that this has come all the way from Italy and there is a sheet with German & Italian and at the bottom says "The dLNB is programmed to Italian and German frequencies" is this justt not programmed for UK ??

Image below :-

20230421_095731.jpg

Am I missing something somewhere ??

Thanks,

Dave.

LNB From here (Plenty of italian reviews !) https://www.amazon.co.uk/dp/B00GEGDV...roduct_details