Thanks what a shame
Thanks what a shame
Works ok for me after installing lcd4linux onto an ultimo4k, running 6.0.008.
6.0.jpg
I did not need to install it on my duo2.It was already there . Screen shows : http://192.168.1.110/lcd4linux/config Processing failed
VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
Triax 88 cm rotor single LNB 30 E- 40 W
1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E
problem resolved : deleted it trough apps and reinstalled.Works now.There must have gone something wrong on installation or updathing. THX for help because when it was working for you it should work in general
VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
Triax 88 cm rotor single LNB 30 E- 40 W
1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E
twol (25-03-22)
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
bellejt (25-03-22)
I have had to do a complete clean rebuild to openvix 6.2.002 and not able to use any of my backups and cannot remember how I installed picons, although I assume installation must have changed since I did it a few years ago. Is it best to put the file in flash, or USB?
I have downloaded a picon file from downloads, the picons are showing on the TV screen but not on the left panel of the Duo 2 box. Have manged to get the smaller middle screen working.
Any guidance would be much appreciated.
Samsung QE55 TV, Sony STN-DN1080 AV Amp, VU Duo2, fixed dish for Freesat, 1m motorised dish.