Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 8 of 8

Thread: OpenViX 6.4 Released!

  1. #1
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    13,769
    Thanks
    2,028
    Thanked 5,044 Times in 3,321 Posts

    OpenViX 6.4 Released!



    Post and questions/problems here!

    The new OpenViX version 6.4 image is based on OpenViX enigma2 and OE-Alliance-core branch 5.3

    The easiest way to flash latest OpenViX image is to do the following:

    First:
    Download the image to your receiver's storage device
    Blue button > ViX > Image manager > Yellow (Downloads) > Select OpenViX > Select image version > Press OK
    You will see the download status

    Second:
    Once downloaded, you should still be in Image manager and the latest image should be highlighted.
    Ensure you have the correct image selected then press the Blue button (Flash)
    The new image will flash and box will reboot when completed.
    In install wizard you can then restore settings and plugins from OpenViX 6.3 (and earlier) series images. This will restore most things to how you had them before.



    RESTORE PROCESS WILL NOT RESTORE PLUGINS THAT ARE NOT ON THE CURRENT PLUGIN SERVER. THESE MUST BE INSTALLED MANUALLY.




    So what is different in OpenViX 6.4?
    OpenViX 6.4 builds on the success of the 6.x series and aims to bring you the important things such as improved stability and bug fixes, rather than gimmicks.

    The main change from version 6.3 to version 6.4 has been to upgrade from oe-alliance-core branch 5.2 to 5.3. The OE (Open Embedded) core on which the image is built has also undergone major changes, updates and fixes, and uses the latest bitbake version. Version 6.4 uses Python version 3.11 which is on average 25% faster than Python 3.10 when measured with the performance benchmark suite. For more info on Python 3.11 major speed improvement see the official documentation. https://docs.python.org/3/whatsnew/3.11.html

    Contains experimental FCC (fast channel change) code for hardware that supports this (Vu+ models with FBC tuners).

    ***Password required for FTP, TELNET & SSH!*** SEE GUIDE HERE!

    • OE-A 5.3
    • Python 3.11
    • Multiboot for Vu+ 4k models
    • HELP screens revamped
    • Compatibility for IceTV plugin
    • OpenWebIf version 2.0



    Known Image issues
    Dreamplex - Some users in certain setup's may have issues.
    QuadPiP - file in /etc/enigma2/quadpip/ should be deleted after a restore from settings, setup recreated and a new settings backup made.
    Some users in certain setup's may have issues.

    Known Plugin/Receiver issues
    Some plugins may not be currently compatible with Python 3 or the OE-A 5.3 core, streaming plugins may also require their respective author's to add dependencies for GST 1.xx. If your plugins worked in any previous OpenViX 6.x series image they should be fine in this version.


    Button Mappings

    Short Red** & *** - Show current channel EPG info (ViX Single EPG).
    Long Red ** & *** - Sort single EPG info when in channel list.
    Short Green** & *** - Timers.
    Long Green*** - AutoTimer Timers.
    Short Yellow*** - EPG Search.
    Long Yellow*** - Instant IMDB Database search on the current programme.
    Short Blue - Extensions.
    Long Blue*** - Plugins Menu.
    EPG - Opens ViX EPG.
    Left/Right** - Opens ViX QuickEPG.
    Up/Down** - Open Full Screen Channel List.
    Long Up/Down - Open PIP list on boxes that support PIP.
    TV Button** - Open Full Screen Channel List.
    Long TV Button - Open Bouquets List.
    ** Can be changed in ViX Menu
    *** Can be turned off in ViX Menu

    Special Thanks


    • prl001 for work on HELP and IceTV compatibility
    • Twol for the conversion to Python 3. This involved manually converting literally hundreds of Python files and associated c++ code.
    • Especially, Orlandox, ccs, ronand, and BeffudledBrian for their feedback and extensive testing over the two years.
    • Twol and Huevos for testing, debugging, and responding to feedback and problems.
    • Huevos for preparing the new build environment, scripts, and building the 6.3 image.
    • Huevos for setting up new feeds for picons.
    • Rytec, doglover and all the teams that host EPG feeds for EPG Importer, for their continued support.
    • All developers for their plugins used in the feeds of this image.
    • All of the ViX Beta team for their hours of testing and dedication on improving the image.
    • All those who have submitted patches/fixes/bug reports.
    • To all who have submitted translation work for OpenViX (Rob, Orlandox and others).
    • Huevos for his work on blindscan
    • Peter de Jonge, abu baniaz & Huevos for their work with Andyblac to improve ABM.
    • Rob van der Does, rossi2000 and Huevos for OpenViX skins.
    • And finally, the forum sponsor, World of Satellite, for providing the hardware for testing, building and hosting OpenViX.



    Notes

    Please upgrade as soon as possible. We do not maintain previous versions.
    Basic feeds for the previous version (6.3) will be maintained for a short period only to allow users to upgrade to the new image. Items such as Kodi, Stalker, Nodejs, QT, etc. and feeds for all other previous versions have already been removed. Sorry for any inconvenience but resources are limited and we cannot maintain parallel versions. We have worked hard to make the upgrade process as easy as possible for our users. These days upgrading from the previous version is painless. Just follow the instructions at the top of this page and you will be up and running with the new version in a few short minutes.



    Receivers supported in 6.4
    • vusolo2
    • vusolo4k
    • vuduo2
    • vuduo4k
    • vuduo4kse
    • vusolose
    • vuuno4k
    • vuultimo4k
    • vuzero
    • vuuno4kse
    • vuzero4k
    • et8000
    • et8500
    • et10000
    • formuler1
    • formuler1tc
    • formuler4turbo
    • gbquadplus
    • gbultraue
    • gbquad4k
    • gbue4k
    • gbtrio4k
    • sf8008
    • sf8008m
    • sfx60x8
    • mutant2400
    • mutant51
    • osmega
    • osmio4k
    • osmio4kplus
    • tiviaraplus
    • tmtwin4k
    • tmnanom3
    • vipercombohdd
    • viper4k
    • viper4k51
    • viper4kv40
    • viper4kv20
    • vipertwin
    • zgemmah7
    • zgemmah82h
    • zgemmah92s
    • zgemmah92h
    • zgemmah9t
    • zgemmah9s
    • zgemmah9sse
    • zgemmah92hse
    • zgemmai55plus
    • zgemmah9combo
    • zgemmah9twin
    • zgemmah9twinse
    • zgemmah11s
    • maxytecmulti
    • ax61
    • sx988



    Receivers not supported in 6.3

    Due to limited resources some end of life models will not be built in version 6.3. If you want to use OpenViX with these receivers please build version 6.3 yourself. There are instructions in our enigma2 repo and we are happy to support you with this on the forum. The following is a list of the receivers supported in previous versions of OpenViX, but not supported in version 6.3:

    • Octagon SF4008
    • Edision OS mini
    • Edision OS mini+
    • Edision OS nino
    • Edision OS nino+
    • Edision OS nino pro
    • VU+ Duo
    • VU+ Uno
    • VU+ Ultimo
    • Xtrend ET-7x00
    • Xtrend ET-9x00
    • Miraclebox Premium Twin
    • Miraclebox Mini Plus
    • Miraclebox Mini Hybrid
    • Miraclebox MB-Micro
    • Miraclebox MB-Micro v2
    • Miraclebox Premium Twin Plus
    • Miraclebox MB-Premium Ultra
    • Octagon SF128
    • Octagon SF138
    • Octagon SF228
    • Technomate TM-Twin
    • Technomate TM-Nano 2 Super
    • Technomate TM-Nano 3T
    • Gigablue HD Quad
    • Golden Interstar LX3
    • Mutant HD11
    • Mutant HD1200
    • Mutant HD1500
    • Technomate TM-Single.
    • Technomate TM-Nano-OE.
    • Technomate TM-2T.
    • TM-Nano-2T.
    • Mutant 500C.
    • Octagon SF8.
    • Octagon XP1000+.
    • Gigablue SE Plus
    • Gigablue UE Plus
    • Golden Interstar LX1 & LX2
    • Media Link Ixuss Zero
    • Miraclebox Mini
    • Opticum DVBC-1
    • Spycat
    • Venton HDx
    • Xtrend ET4x00
    • Xtrend ET5000
    • Xtrend ET6x00
    • GB Solo
    • GB 800SE
    • GB 800UE
    • Mara M9
    • Venton Unibox
    • VU+ Solo
    • gbx1
    • gbx2
    • gbx3
    • gbx3h
    • tmnanose
    • tmnanosecombo
    • tmnanosem2
    • tmnanoseplus
    • tmnanosem2plus




    Translations:
    If anyone is interested in doing any translation work for the plugins and the image itself, please see here


    Image Downloads.
    (Available via www.openvix.co.uk)



    Reporting Issues
    Please report any issues using these guidelines
    http://www.world-of-satellite.com/showthread.php?33155-ALL-MEMBERS-PLEASE-READ!-New-method-of-posting-in-ViX-Support-Section!



    Image Flashing tutorials Here

    Follow us on Twitter Here



    Last edited by abu baniaz; 22-09-23 at 15:08. Reason: Update OE-A branch url
    Help keep OpenViX servers online.Please donate!

  2. The Following 4 Users Say Thank You to Huevos For This Useful Post:

    31121964 (18-06-23),DR-10 (19-08-23),h33b0 (06-08-23),LbCwby (19-06-23)

  3. #2
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    13,769
    Thanks
    2,028
    Thanked 5,044 Times in 3,321 Posts

    6.4.002

    • [MultiBootSelector] remove unused variable
    • [recovery.xml] only show MultiBootSelector and ImageManager in the main menu
    • [SkinSelector] unused import
    • [SystemInfo] add hi3798mv300
    • [About] remove build revision from gstreamer version
    • [About] fix number of cpu cores
    • [Harddisk] fix format disk
    Help keep OpenViX servers online.Please donate!

  4. The Following 6 Users Say Thank You to Huevos For This Useful Post:

    AL.B (02-07-23),DR-10 (19-08-23),h33b0 (06-08-23),Orlandox (02-07-23),Sicilian (02-07-23),Willo3092 (01-07-23)

  5. #3
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    13,769
    Thanks
    2,028
    Thanked 5,044 Times in 3,321 Posts

    6.4.003

    • [SoftcamManager] prevent crash with softcam check enabled and no /etc/tuxbox/config/oscam.conf file
    • [SoftcamManager] reset config values so freeze check runs after set by user
    • [Timer] Add a timer log entry when a timer is dis/enabled.
    • [enigma2.sh.in] add sx88v2 to libreader
    • [StartEnigma] further cleanup - remove pass, remove set config.clientmode for VuRecovery
    • [enigma2.sh.in] Make the boxtype test simpler to read and modify. Set a flag from the result for later use rather than redo the same test.
    • [EpgSelectionBase] add TMDb and tidy up
    • [EpgSelection] tweak imports
    • [EpgSelection.py] add handling for TMDb
    • [MovieSelection] add missing ServiceReference wrapper
    • [EventView] Allow display of plugin description in EventViewContextMenu if available



    The Movie DataBase (TMDB) plugin has had various updates and can now be added to a colour button in the Infobar and EPG screens.
    Help keep OpenViX servers online.Please donate!

  6. The Following 5 Users Say Thank You to Huevos For This Useful Post:

    bbbuk (31-07-23),DR-10 (19-08-23),EckyH (28-07-23),h33b0 (06-08-23),Orlandox (28-07-23)

  7. #4
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    13,769
    Thanks
    2,028
    Thanked 5,044 Times in 3,321 Posts

    6.4.004

    PliExtraInfo, ServiceInfo, VAudioInfo - sync Codecs with Openbh
    [CIHelper] simplify xml read
    [CommonInterfaceAssignment] simplify xml read
    [Timezones] simplify xml read
    [PowerTimer] simplify xml read
    [RecordTimer] simplify xml read
    [keymapparser] simplify xml read
    [NimManager] simplify xml read
    [InputDevice] remove unused imports
    [Converter] add StreamInfo
    [StreamInfo] simplify
    [Codec] resync with Openbh following revert of servicemp3
    [servicemp3] restore useragent
    [sec] fixed linked compare tuner data if used unicable multiswitch
    [StartEnigma] noop Vu debug line
    [CI] change highBitrate setting to allow extra_high if available
    [eDVBCIInterfaces/eDVBCISlot] use string value for setClockRate
    [TransponderInfo] Streams, don't show port number
    [TransponderInfo] fix coding error
    [TransponderInfo] fix getBoolean
    [TransponderInfo] simplify extracting url
    [About] SystemNetworkInfo, convert bytes to human readable
    [Harddisk] remove unused (old) code
    [configure.ac] replace depreciated AC_HELP_STRING with AS_HELP_STRING
    [servicemp3] add missing return
    Revert "[servicemp3] format audio track description"
    [Setup] add new setting to cleanup HI-subtitles
    [Setup] remove Centre DVB Subtitles option as not needed
    [FCC] add to Developer branch and stop using FCC patch
    [vix-core] when automatically selecting GUI language use the most recent backup
    Help keep OpenViX servers online.Please donate!

  8. The Following 4 Users Say Thank You to Huevos For This Useful Post:

    bbbuk (19-08-23),DR-10 (19-08-23),EckyH (19-08-23),Orlandox (19-08-23)

  9. #5
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    13,769
    Thanks
    2,028
    Thanked 5,044 Times in 3,321 Posts

    6.4.006

    • [InfoBarGenerics] InstantRecordings - input can be as number only
    • [InfoBarGenerics] tweak debug
    • [InputBox] Add functionality to enter a number with max value
    • InfobarGenerics: Use new maxValue functionality from InputBox
    • [display480] tweak
    • [MinuteInput] added posibility set maxValue for minute input
    • [Input.py] tweak syntax
    • [SystemInfo] BoxInfo, add forceOverride to deleteItem
    • [SystemInfo] simplify hasInitCam
    • vix-core - initial commit as is to ViX
    • confgure.ac/ViX - add makefiles to configure.ac
    • SystemPlugins/Makefile - add ViX SystemPlugin
    • ViX add License, maintainer.info, updated Makefile
    • ViX plugin - convert from imported plugin to installed
    • [Menu] parameters.MenuIcons, make reading this parameter the same as other parameters in skin.py
    • [Menu] plugins, make "close" a keyword argument
    • [Menu] simplify MenuEntryPixmap
    • [Menu] Simplify get description from plugins
    • [Menu] Remove commented out code
    • [doc/MENUICONS] add info
    • [Menu] remove Class MenuUpdater, appears to be dead code
    • [Menu] Remove node.encode
    • [Menu] remove variable swapping for no reason
    • [display800] remove dead code
    • ViX - images makefile .. correct directory
    • GitCommitInfo - remove vix-core
    • ViX plugin.py remove config.misc.restorewizardrun
    • move config.misc.restorewizardrun = ConfigBoolean(default=False) to StartWizard
    • move restorewizardrun
    • ViX plugin - add translations to .po
    • Add PEP bot
    • [CI] chmod 755
    • chmod files to correct permissions
    • Remove ViX/src folder
    • event.cpp fix utf-8 issue with size of event_name
    • ImageManager - Hisilicon boxes have 4 eMMC slots
    • Harddisk - add usb1/1-1/1-1.4/1-1.4:1.0" in self.phys_path) for HiSilicon devices
    • [PluginBrowser] fix sorting self.pluginlist 500 times where once is desired
    • [config.py] ConfigDirectory, add getter, setter propertySwapManager
    • [SoftwareUpdate] make translations identical
    • [SoftwareUpdate] dgettext not required
    • Factoryreset - dgettext not required - Translation domain vix is now local
    • Standby - dgettext not required - Translation domain vix is now local
    • [skin] fix variable name
    • [Menu.py] rearrange imports
    • [Menu] add menu image
    • [Setup] move loading setup image to own its method
    • [PlugComponent] remove return None
    • [Menu] remove unused "parent" arg
    • [Menu] skip fetching plugin description
    • [Menu] simplify xml format
    • [Menu/Setup] add "fix me" message for missing "text" attribute
    • [Menu] simplify load image
    • [Setup] simplify load image
    • [Menu] show "fix me" warning in empty text string
    • [Setup] tweak text and description translation
    • [skin_display] fix parent.title
    • [ScreenSummary] remove new "proposed" skin names as these are not and have never been used
    • [MenuSummary] reduce code to the minimum required
    • [Menu] Allow the conditional attribute to work in <menu> elements
    • [Menu] simplify description
    • [menu.xml] remove redundant entries
    • [Menu/PluginComponent] tweak fetching plugin description
    • [Menu] paths for menu list icons controlled from skin.py
    • [StartEnigma/ButtonSetup] add compatibility with new menu.xml format
    Help keep OpenViX servers online.Please donate!

  10. The Following 8 Users Say Thank You to Huevos For This Useful Post:

    abu baniaz (13-09-23),deltec (25-10-23),EckyH (14-09-23),Ev0 (13-09-23),judge (14-09-23),Orlandox (14-09-23),rte (14-09-23),Willo3092 (14-09-23)

  11. #6
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    13,769
    Thanks
    2,028
    Thanked 5,044 Times in 3,321 Posts

    6.4.007

    • [etc] add exports and cron readme
    • [ChannelsImporter] fix TypeError
    • [AudioSelection/ServiceInfo] Fix Mpeg1 Layer II audio codec
    • [ServiceInfo/VAudioInfo] Fix Mpeg1 Layer II audio codec
    • [frontend] update dB/snr value tuner M1502A(external) (#3771)
    • [M4] whitespace
    • [ChannelsImporter] remove obsolete comments Remove unused call to time().
    • ax_python_devel.m4 add python 3.12 support - Updated to cross compile for OE-Alliance Enigma2 git builds
    • ax_python_devel.m4 update to serial 36
    Help keep OpenViX servers online.Please donate!

  12. The Following 8 Users Say Thank You to Huevos For This Useful Post:

    abu baniaz (19-09-23),AL.B (19-09-23),deltec (25-10-23),DR-10 (19-09-23),EckyH (19-09-23),Ev0 (19-09-23),khan888 (24-09-23),Orlandox (19-09-23)

  13. #7
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    13,769
    Thanks
    2,028
    Thanked 5,044 Times in 3,321 Posts

    6.4.008

    Stream relay update.
    Help keep OpenViX servers online.Please donate!

  14. The Following 2 Users Say Thank You to Huevos For This Useful Post:

    AL.B (20-10-23),deltec (25-10-23)

  15. #8
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    13,769
    Thanks
    2,028
    Thanked 5,044 Times in 3,321 Posts

    6.4.010

    • Updated Finnish (fi.po) translation.
    • [Updated] Caid middle lenght names
    • [Added] AudioIcon renderer
    • [Added] [PliExtraInfo] Current Caid label [Fixed] [VAudioInfo] crash in maketrans due to wrong parameter
    • [Videomode] - resolve GB4K initial open failure
    • [listboxservice] fix compile warning
    • [ChannelsImporter] allow repeats attempts if server is not available
    • [Fixed] [ServiceList] Column mode
    • [Videomode] - fix possible key error, sequence imports
    • [Videomode] - fps not reset on change whem Video settings Refresh rate set to Multi
    • [listboxservice] whitespace
    • whitespace cleanup
    • [TaskView] - while running ImageManager - crash at end of Backup in TaskView - so add a sanity check to prevent key_blue crash
    • [Element] - occasionally when running ImageManager there is no __suspended attribute on entry - so catch and report, this can catch other issues
    • Softcam - rename menu to Softcam Management and move Softcam Script into this menu
    • [Fixed] Not working selectionPixmap for ServiceList
    • Updated Finnish (fi.po) translation.
    • [ServiceList/setup.xml] Fix correct order for record_icon_match_value
    • [config.recording.record_icon_match] convert to ConfigSelection
    • [listboxservice] compareServices, avoid some false positives
    • [Translations] Update Dutch (NL) translation.
    • [Updated] Inverted the condition for match for rec icon
    • [Added] Make rec icon match logic configurable
    • Updated Finnish(fi.po) translation.
    • Add matching for record icon
    • Updated Finnish (fi.po) translation.
    • [setup.xml] update "two line" description
    • [Pager] typecast maxPages to int
    • Revert "[Fixed] [Pager] Wrong parsing of maxPages"
    • [StreamRelaySetup] add module
    • [StreamRelay] move to own class
    • Updated Finnish (fi.po) translation.
    • [ServiceName.py] add sanity
    • [Added] Enable blink option
    • [Updated] ServiceName converter with tuner system
    • [Fixed] [Pager] Wrong parsing of maxPages
    • [Updated] Make directory icon scale to fit the icon size
    • [Setup] createSetup add parameter for append and prepend items
    • [setup.xml] fix SecondInfoBarSimple requiring a skin.parameter
    • Updated fi.po
    • Updated fi.po
    • Updated Finnish (fi.po) translation.
    • [Navigation] simplify streamrelay shutdown timer
    • [Fixed] overlapping variables in PLi
    • [MultiPixmap] remove SKOPE_SKIN_IMAGE lookup
    • [MultiPixmap] simplify
    • [MultiPixmap] add handling for widget size when calling skin.loadPixmap
    • [Added] ScreenHeader addon
    • [Nav] update SR delay
    • [Fixed] cleanup unused variable.
    • [Updated] [ServiceList] Single line mode handling
    • Updated Finnish (fi.po) translation
    • [StreamRelay] add adjustable delay
    • [Fixed] Separator char for IPTV providers functionality
    • [Fixed] Delay in loading transponder data for stream relay service
    • [Fixed] typo in variable
    • [Updated] variable names
    • [Added] Original provider name for SR channels [Updated] Some code optimizations
    • [Fixed] Recordings of stream relay channels not working
    • [Added] handling of stream relay channels properly in cpp
    • [Fixed][ServiceList] Missing icon for recording of stream relay channel
    • [StartEnigma] check for translation.xml before call
    • [CI] Fix URI_VERSIONS
    • [CI] Operator profile
    • [CI] Add ressources for CI+ 1.4 compability
    • [ServiceList] Fix for old 720 skins
    • [SeviceList] iterate with itemHeight first
    • [ServiceList] add serviceItemHeight for legacy compatibility
    • [ServiceList] tweak itemHeight
    • [Fixed] gap between name and directory icon in two lines mode
    • [ServiceList] fix loading double height pixmap
    • [ServiceList] set default item height
    • [ServiceList] in two line mode respect ratio between single line and two line mode
    • [Fixed] [ServiceList] Showing only the first recording in channel list
    • [MediaPlayer] Fix constant spinner if enabling MediaPlayer in main menu
    • [Fixed][ServiceList] Alignment issues
    • [Fixed/ServiceList] broken user number of rows [Fixed/ServiceList] Alignment of service title in single line mode
    • [Fixed] Alignment issues in ServiceList
    • [ServiceList/lisboxservice] refactor two line mode
    • [SoftcamManager] remove " " when key_yellow is supposed to display nothing.
    • [Fixed] markers icon stretching [Added] different modes of rendering markers
    • [Added] Compatibility of the ServiceList with pager
    • [Fixed] ServiceList scaling and alignment
    • [Fixed] new servicelist visual mode offset when have folder icon
    • [Fixed] EPG timer icons position
    • [Fixed] Record service name
    • [Fixed] Wrong setting for servicelist [Fixed] MovieInfo converter formatted text [Added] Add recording service name to the formatted string
    • skip non-utf8 entries when loading a playlist
    • [CI] fix utf-8 camname
    • [VariableText] sanity check text 'str' type
    • VariableText.py: Cast self.message to unicode string
    • [Added] switching the layout of the pager if total count of pages exceeds specified value
    • [PliExtraInfo] add a temp workaround for stream relay provider names
    • [PliExtraInfo] add an alternative way to get transponder data (compatible with stream relay)
    • [PliExtraInfo] avoid duplicating east/west code
    • [PliExtraInfo] clean url so it doesn't show passwords in the interface
    • [Fixed] missing qa supression [Fixed selectionPixmapLarge to not clear the image if not suplied
    • [Added] Options handling for new service list visual mode [Fixed] some alignments issues
    • [python/Makefile] update
    • Updated Finnish (fi.po) translation
    • [SessionObject] add module
    • - fixed exception when current item is None
    • [ServiceList] reapply pep comment that was removed in error
    • [PLiExtraInfo] tweak for SR
    • [Fixed] play condition
    • [Fixed] Missing variable
    • [Fixed] Stream relay zap out and disabling services
    • [Added] Support for provider for IPTV services (sref starting with 1 or 4097)
    • [Added] Alternative two line visual mode in ServiceList
    • Updated Finnish (fi.po) translation
    • [Updated] EventName converter
    • [InfoBarGenerics] update whitelist sort
    • [PliExtraInfo] flake8 PEP
    • [PliExtraInfo] - add provider names for streamrelay services (Twol/Ev0)
    • [ServiceOrbitalPosition] add orbital position for streamrelay services, sequence imports
    • Fix MMI text conversion
    • Fix CI info
    • SecndInfoBar: fix indent
    • [MovieContextMenu] make "config" widget mandatory
    • [InfoBarGenerics] sort whitelist
    • [ServiceInfo] Add Fix workaround for H.265 with Extplayer3
    • [Convertor] do not use "str" as a variable name
    • [Added] Resolution, framerate, videocodec for IPTV services in ServiceInfo screen
    • [Translations] Update Dutch (NL) translation.
    • dividing by zero
    • [Addons] Unused imports
    • Updated Finnish (fi.po) translation.
    • [Removed] Unused imports
    • [Added] Added spaceLeft for movieList [Fixed] Some positioning issues in several screens
    • [CI] Fix descrambling when using tuner B-H
    • [Added] Dynamic size of timer icons in epg screens [Added] Margin for Single Epg
    • [InfoBarGenerics] - update showSystemMenu & showNetworkMounts to use key(thanks Huevos)
    • [menu.xml] disable "netafp", not currently built
    • [PositionerSetup] add missing button hooks
    • Update DOC
    • [AUTOMATICBUTTONSGUIDE] add document
    • [ColorButtonSequence] change "spacingButtons" attribute ... ... to "spacing" so it matches the attributes in ButtonSequence.
    • [ButtonSequence] Get itemHieght and width from the widget, reather than extra attributes
    • [ColorButtonsSequence] Arithmetic: skip graphic margin if no graphic
    • [ColorButtonsSequence] foregroundColor, fall back to the listbox default if no color is supplied by the widget
    • [LayoutInfo] fix indent
    • [ColorButtonsSequence] Get itemHieght and width from the widget, reather than extra attributes
    • made 320 markers editable/deletable via bouquet edit mode
    • added check for empty text
    • fixed exception due to unbound variable used
    • Fix saving the set range in ProgressBar
    • Updated fi.po
    • fixed validation of mandatory widgets when using addons
    • [Added] Supressions of warnings if the component is used only in the addon
    • [Added] Added logic to switch to fluid layout if there is not enough space for fixed layout
    • [Fixed] Exceptions on some screens
    • [Added] Possibility to define colors for button text [Updated] Logic for fixed layout updated
    • add a init value for pixmap width to 0 if there is no pixmaps
    • First version of color buttons addon widget
    • [FCC] skip stream relay
    • [OScamInfo] fix crash
    • [PLiExtraInfo] display frequency as human readable
    • [ScriptRunner] add menu key
    • [BackManager] remove pointless skin
    • Updated Finnish (fi.po) translation
    • [NetworkSetup] - cleanup
    • [WirelessLan][plugin] - cleanup PEP
    • [TimerList] - cleanup PEP
    • [OScamInfo] - cleanup PEP
    • [listboxservice] fix searching for prev/next visible marker
    • [listboxservice] when searching markers don't stop on numbered markers
    • - added alignment possibility to the ButtonSequence
    • - add onChanged event to VariableText so to work with addons
    • - added new addon for dynamic button sequences
    • fix ePythonStringContent to handle correct text offset
    • fix ePythonStringContent to handle correct text offset
    • [OscamInfo] cleanup
    • [UserInterfacePositioner] remove pixmap
    • [Satconfig] remove NoSave
    • [PowerTimerEntry] remove ActionMap entriesroot
    • [MovieSelection] unused variable playInForeground
    • [config] use variable name instead of l
    • [VolumeControl] valid l use noqa, remove unused variable oldvol
    • [TimerList] valid l use noqa
    • [PowerTimerList] valid l use noqa
    • [MovieList] mark valid l with noqa, use variable name for others
    • [MenuList] valid l use noqa
    • [ServicePosition] use variable name to replace l
    • [UsageConfig] -remove unused time import, PEP8 comments
    • [TuneTest] - resolve bad comment PEP8
    • [Navigation] - resolveF401
    • SoftwareManagement - remove unused historical plugin
    • [opentv_zapper] attempt to solve indent
    • [Satfinder] unused import
    • [ServiceName2] remove duplicate code
    • [PluginComponent] add sanity text in removePlugin
    • [Task] import os.F_OK cleanup PEP8
    • [HelpMenuList] don,t use l variable PEP8
    • [ServiceList] some cleanup PEP8
    • [ServicePosition] don,t use l variable PEP8
    • [OscamInfo] some cleanup PEP8
    • [Scanner] don,t use l variable PEP8
    • [AnalogClockLCD] don,t use l variable PEP8
    • [Canvas] don,t use variable l PEP8
    • [PackageInfo] PEP8
    • [Network] PEP8
    • [Satfinder][plugin] PEP8
    • [OpentvZapper][opentv_zapper] PEP8
    • [FastChannelChange][plugin] PEP8
    • [Animations][plugin] don't use l variable PEP8
    • [PicturePlayer][ui] PEP8
    • [PicturePlayer][plugin] PEP8
    • [MediaPlayer][plugin] PEP8
    • [DVDBurn][ProjectSettings] use r option in pattern matching PEP8
    • [DVDBurn][DVDTitle] use variable name not l PEP8
    • [CutlistEditor][ui] PEP8
    • [Timeshift] PEP8
    • [TimerSanityCheck] PEP8
    • [MediaPlayer] use named variable rather than l PEP8
    • [InputDevice] PEP8
    • [HdmiCec] PEP8
    • [Harddisk] PEP8
    • [FileList] use variable name other than l PEP8
    • [EpgListMulti] use variable name not l PEP8
    • [EpgListBase] PEP8
    • [EpgListGrid] PEP8
    • [EpgBouquetList] PEP8
    • [Task] PEP8
    • [ServiceName2] PEP8
    • [RemainingToText] PEP8
    • [MovieReference] PEP8
    • [LayoutInfo] convert from spaces to Tabs
    • [ConverterRotator] fix PEP8 noise
    • [CpuUsage] fix indent PEP8
    • [ConverterRotator] fix PEP8 noise
    • [ConfigList] fix PEP8 ambiguous variable l
    • [ViX][BackupManager] - silence some PEP8
    • [ViX][IPKInstaller] - silence some PEP8
    • [ViX][ImageManager] - silence some PEP8
    • [ViX][MountManager] - silence some PEP8
    • [ViX][RestoreWizard] - silence some PEP8
    • [ViX][SoftcamManager] - silence some PEP8
    • [ViX][SwapManager] - silence PEP8
    • [ViX][ui] - silence PEP8
    • [VideoEnhancement] - silence PEP8 on variable x
    • [VideoEnhancement] - silence PEP8
    • [VieoFinetune] - replace variable l with offset, silence some PEP8
    • [MovieSelection] - silence some PEP8
    • [ParentalControlSetup] - silence PEP8
    • [Screen] - silence PEP8
    • [SoftwareUpdate] - silence PEP8
    • [Standby] - consolidate imports, fix over ident & PEP8
    • [TaskView] - silence PEP8
    • [TimerEdit] - silence PEP8
    • [TimerEntry] - remove unused Screen import
    • [UserInterfacePositioner] - remove unused import ConfigSubsection
    • [UserInterfacePositioner] - remove unused imports ConfigText & Pixmap
    • [VideoMode] - remove unused About import
    • openvix: developer 6.4.009.003
    • [BackupManager] silence a warning
    • [OSCamInfo] fix undefined name 'readers'
    • [RestoreWizard] silence a warning
    • [ImageManager] missing import "copy"
    • [TimerEntryBase] add missing import
    • [InputDeviceSetup] call newConfig on keySelect
    • [InfoBarGeberics] - PEP8
    • [ChannelSelection] PEP8
    • [Wizard] PEP8
    • [StartEnigma] PEP8
    • [skin] - PEP8
    • [skin] put back removed scopes
    • [CCcamInfo] -PEP8 cleanup
    • [ChannelSelection] -PEP8 cleanup
    • [CI] -PEP8 cleanup
    • [CronTimer] -PEP8 cleanup
    • [DVD] -PEP8 cleanup
    • [EventView] -PEP8 cleanup
    • [FixedMenu] -PEP8 cleanup
    • [GitCommitInfo] -PEP8 cleanup
    • [InfoBarGenerics] -PEP8 cleanup
    • [InputDeviceSetup] -PEP8 cleanup
    • [Ikpg] -PEP8 cleanup
    • [LogManager] -PEP8 cleanup
    • [MultiBootSelector] -PEP8 cleanup
    • [OscamInfo] -pass 1 PEP8 cleanup
    • [PictureInPicture] -unused variable h and PEP8 complaints
    • [PluginBrowser] -PEP8 complaints
    • [PowerTimerEdit] -PEP8 complaints
    • [PowerTimerEntry] -remove unusede localtime, strftime plus PEP8 complaints
    • [Rc] - PEP8 complaints
    • [RdsDisplayy] - PEP8 complaints
    • [Satconfig] - remove unused self.IDX variable plus PEP8 complaints
    • [ScanSetupr] - remove 1 unused tlist and unused Satlist plus PEP8 complaints
    • [ScreenSaver] - PEP8 complaints
    • [Setup] - PEP8 complaints
    • [SoftcamScript] - PEP8 complaints
    • [SoftwareUpdate] - PEP8 complaints
    • [StartWizard] - PEP8 complaints
    • [StreamingClientsInfo] - PEP8 complaints
    • [SubservicesQuickzap] - PEP8 complaints
    • [SubtitleDisplay] - PEP8 complaints
    • [TaskView] - PEP8 complaints
    • [TextBox] - PEP8 complaints
    • [TimerEdit] - PEP8 complaints
    • [TimerEntry] - fix indented code, unused imports, PEP8 complaints
    • [TimerEntryBase] - PEP8 cleanup
    • [TimerSelection] - PEP8 cleanup
    • [UserInterfacePositioner] PEP8 cleanup
    • [VideoMode] - remove indents, unused variables etc PEP8
    • [NavigationInstance] - remove blank line
    • [PowerTimer] - only import os functions and sort imports
    • [PowerTimer] - variable l PEP8 cleanup
    • [PowerTimer] - PEP8 cleanup
    • [RecordTimer] - kill PEP8 complaints
    • [StartEnigma] - PEP8 kill import not at top complaints
    • [Skin] - remove unused SCOPE's CONFIG & SKIN_IMAGE - remove PEP8 on variable c
    • openvix: developer 6.4.009.002
    • - added selection image for AudioSelectionScreen
    • - add warning pixmap to guarding check
    • - fix messagebox crash due to missing warning pixmap
    • Update sk.po
    • Revert https://github.com/OpenViX/enigma2/c...846e253f0f9a42 because enigma is a house of cards
    • [MessageBox] rewrite autoresize
    • [ChoiceBox] Specify imports, not just import enigma
    • Updated fi.po
    • Updated Finnish (fi.po) translation.
    • [ChoiceBox] fix error on line 143, previously getSize was not read
    • [ChoiceBox] rewrite autoresize
    • [ChoiceList] make the text width the same as the screenwidth to avoid breaking autoresize
    • openvix: developer 6.4.009.001
    • - add additional check for font index existence
    • [eListboxPythonMultiContent] added missing font variable to the formula for calculating max text width
    • [MovieSelection] tweak title separation char
    • [Converter] don't add space around the seperation char
    • [ChoiceBox] add comment
    Help keep OpenViX servers online.Please donate!

  16. The Following 8 Users Say Thank You to Huevos For This Useful Post:

    abu baniaz (12-12-23),DimitarCC (16-12-23),DR-10 (12-12-23),Ev0 (12-12-23),Joe_90 (12-12-23),Orlandox (14-12-23),Szelest (12-12-23),zehnisağcan (02-04-24)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.