Now I've made my choice from the other thread I'm expecting it on Tuesday with a Unicable LNB.
I now only have a fixed satellite system pointed at 28.2E.
Already in position to be replaced is a 10 year old VU+ Solo2 and twin LNB.
The Uno4K should be coming with OpenVIX installed.

So for ease of setting up I was going to:

1) Change the LNB first, since the Solo2 is already programmed hopefully I'll get a picture straight away or would I have to change something in the Tuner settings of the Solo2 before I expect a picture? Obviously the angle of the Unicable LNB might not be bang on so a bit of adjusting might be needed but should that LNB work straight away without changing anything in the settings?

2) As soon as I get an excellent picture I can then put the Uno4K into place and using this guide setup the Tuner - https://www.world-of-satellite.com/s...-configuration

3) My satellite LNB is positioned just above shoulder height so very easy to replace, since the Uno4K has got it's own screen could I take that outside and see all the settings like I would on my TV?

4) Any other info appreciated.


Tuner setting on my Solo2

vu+tuner.jpg

Thanks for any advice.