twol (03-08-21)
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Good, there is a workaround... ( sorry,I didn't read all the thread as before the upgrade I didn't have the problem)
To be consistent with other init files I did something a little different.
created with vi the file /etc/init.d/softcam.sh
made it executable with chmod +x
made a soft link in /var/etc/rcS.d to S56softcam.sh
disable startup, reboot and it works.
If a restart is needed I'd rather have a cron job that test if it is running and restart it instead of a full reboot that could disrupt a recording.
Thanks,
G
widar (04-08-21)
I did the same,
created with vi the file /etc/init.d/softcam.sh
made it executable with chmod +x
made a soft link in /var/etc/rcS.d to S56softcam.sh
disable startup, reboot. But although Oscam started, it did not work as it was looking for DVBapi, and could also not resolve DNS names (yet), so I changed the filename to S68softcam.sh and this starts it later in the stack and now works fine after a reboot
widar (17-10-21)
Has 5.4.016 solved this problem? Just tried using script and softcam manager and both seem to be working the same. Can anyone else confirm?
Same as what? They both work properly... or don't work properly?
So the Oscams built are now the same across all the images.
You have 3 start choices in 6.0:
1. Use the SoftcamManager
2. disable SoftcamManager and run the script like OpenPli/OpenATV ...menu/setup/softcamscript .... make sure you have config directory in /etc/tuxbox/config with the correct configs for that Oscam e.g. oscam-latest or oscam-emu
3. run your own script to start Oscam from init.d
Last edited by twol; 09-11-21 at 17:00.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
spanner123 (11-11-21),widar (13-11-21)