- Vu+ Duo 2 1 x DVB-S/S2 Twin Tuner, 1 x DVB-C/T/2 Twin Hybrid Tuner, 1TB Internal HDD; Vu+ Official Qwerty remote, w/ OpenVix 4.2 & Slyk1HD V5.1 Skin by kiddac
- Technomate 97cm Mesh Satellite Dish with Octo 8 way LNB
- Android 5.0.1 Lollipop Smart TV Box w/ Kodi v16.1 Jarvis custom flashed for EXMP fully loaded
FULL Picon Sets for LCD Screens and GUI - SNP includes 28.2e Satellite, Virmin Cable, 13, 23 & 19 Sat & IPTV {click here}
Can you not put the external hdd straight into your tv?
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
or mount your extenal as mounting when needed.then the box only looks at it when you choose it.
VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
Triax 88 cm rotor single LNB 30 E- 40 W
1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E
Unfortunately not, I use mac so hdd has to be formatted on expat which TV doesn't recognise, do you think my had is the problem then?
For the first few weeks of having the duo2 it seemed go be fine with it plugged in
I could connect it through other devices if the had is the problem though
- Vu+ Duo 2 1 x DVB-S/S2 Twin Tuner, 1 x DVB-C/T/2 Twin Hybrid Tuner, 1TB Internal HDD; Vu+ Official Qwerty remote, w/ OpenVix 4.2 & Slyk1HD V5.1 Skin by kiddac
- Technomate 97cm Mesh Satellite Dish with Octo 8 way LNB
- Android 5.0.1 Lollipop Smart TV Box w/ Kodi v16.1 Jarvis custom flashed for EXMP fully loaded
FULL Picon Sets for LCD Screens and GUI - SNP includes 28.2e Satellite, Virmin Cable, 13, 23 & 19 Sat & IPTV {click here}
- Vu+ Duo 2 1 x DVB-S/S2 Twin Tuner, 1 x DVB-C/T/2 Twin Hybrid Tuner, 1TB Internal HDD; Vu+ Official Qwerty remote, w/ OpenVix 4.2 & Slyk1HD V5.1 Skin by kiddac
- Technomate 97cm Mesh Satellite Dish with Octo 8 way LNB
- Android 5.0.1 Lollipop Smart TV Box w/ Kodi v16.1 Jarvis custom flashed for EXMP fully loaded
FULL Picon Sets for LCD Screens and GUI - SNP includes 28.2e Satellite, Virmin Cable, 13, 23 & 19 Sat & IPTV {click here}
Personally I would take the external hdd out and see how the receiver responds. I've setup numerous Vu+ receivers up and never come across your issues, but then again I don't use an external hdd or the Vu+ Turbo tuner. Can I ask why you opted for the USB tuner as opposed to the internal ones?
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
- Vu+ Duo 2 1 x DVB-S/S2 Twin Tuner, 1 x DVB-C/T/2 Twin Hybrid Tuner, 1TB Internal HDD; Vu+ Official Qwerty remote, w/ OpenVix 4.2 & Slyk1HD V5.1 Skin by kiddac
- Technomate 97cm Mesh Satellite Dish with Octo 8 way LNB
- Android 5.0.1 Lollipop Smart TV Box w/ Kodi v16.1 Jarvis custom flashed for EXMP fully loaded
FULL Picon Sets for LCD Screens and GUI - SNP includes 28.2e Satellite, Virmin Cable, 13, 23 & 19 Sat & IPTV {click here}
So the internal slots you must have both slots using a single satellite tuner as opposed to the twin tuner module?
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
- Vu+ Duo 2 1 x DVB-S/S2 Twin Tuner, 1 x DVB-C/T/2 Twin Hybrid Tuner, 1TB Internal HDD; Vu+ Official Qwerty remote, w/ OpenVix 4.2 & Slyk1HD V5.1 Skin by kiddac
- Technomate 97cm Mesh Satellite Dish with Octo 8 way LNB
- Android 5.0.1 Lollipop Smart TV Box w/ Kodi v16.1 Jarvis custom flashed for EXMP fully loaded
FULL Picon Sets for LCD Screens and GUI - SNP includes 28.2e Satellite, Virmin Cable, 13, 23 & 19 Sat & IPTV {click here}
So could my problem be the ext hdd or the USB tuner? Or both? The box seemed to be absolutely fine before using the USB tuner but I don't understand why it creates problems as its the official vu+ tuner bought directly from wos shop
If I run though my steps for reflash could somebody could identify the potential issue?
Inserted USB into mac, ran SD formatter and cleaned USB stick
Downloaded latest Openvix official from their site
Unzipped to desktop
Transferred vuplus folder to USB stick
Safely removed USB stick
Switched off Vu+duo2 by rocker switch
Unplugged external hdd and USB tuner
Plugged in USB to front USB of receiver
Powered on, prompted update to press power
Pressed power
Flashed image
Ran through initial setup - hdmi, lan, tuner configure etc
Downloaded oscam and configured (mods/admins FYI fta only)
Rebooted box
Ran autobouquets maker
Downloaded channels
Downloaded exfat driver from plugin menu
Downloaded vu-turbo-USB driver from plugin menu
Shutdown box
Inserted external hdd USB
Inserted Vu+USB tuner
Turned on box
Set up cable tuner configure to dvb-c
Ran auto bouquets maker for cable
Downloaded kiddac's sly skin v4.009
Rebooted box
Set up box accordingly to my preferences - av settings, cross epg, user interface etc
Formatted internal had and ran initialise to remount
Ftp to box, transferred picons
Set up LCD4Linux
Set up openwebif
Set up transcoding from plugin
Downloaded add stream URL from plugin menu and added BBC three to my bouquet
Rebooted box
Done
- Vu+ Duo 2 1 x DVB-S/S2 Twin Tuner, 1 x DVB-C/T/2 Twin Hybrid Tuner, 1TB Internal HDD; Vu+ Official Qwerty remote, w/ OpenVix 4.2 & Slyk1HD V5.1 Skin by kiddac
- Technomate 97cm Mesh Satellite Dish with Octo 8 way LNB
- Android 5.0.1 Lollipop Smart TV Box w/ Kodi v16.1 Jarvis custom flashed for EXMP fully loaded
FULL Picon Sets for LCD Screens and GUI - SNP includes 28.2e Satellite, Virmin Cable, 13, 23 & 19 Sat & IPTV {click here}
I would try without the external hdd first.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Tried without the external hdd, still same issue, box freezes up frequently when on cable channel, so only way to resolve is switching off from back and when I switch back on box freezes on 'double' showing on vfd screen, only way to get by it is plugging in USB as recovery, ignoring the update and letting it boot that way.
I am leaning towards thinking the issue is with the USB tuner
Which is very frustrating because it's made by Vu+ and is designed for the box I have, but clearly doesn't work as its described :/ I suppose I will have to just give up being able to use satellite and cable
It makes sense for this to be the issue because I didn't have any problems before I used cable
- Vu+ Duo 2 1 x DVB-S/S2 Twin Tuner, 1 x DVB-C/T/2 Twin Hybrid Tuner, 1TB Internal HDD; Vu+ Official Qwerty remote, w/ OpenVix 4.2 & Slyk1HD V5.1 Skin by kiddac
- Technomate 97cm Mesh Satellite Dish with Octo 8 way LNB
- Android 5.0.1 Lollipop Smart TV Box w/ Kodi v16.1 Jarvis custom flashed for EXMP fully loaded
FULL Picon Sets for LCD Screens and GUI - SNP includes 28.2e Satellite, Virmin Cable, 13, 23 & 19 Sat & IPTV {click here}
found on several other websites that it is a compatibility problem with openxxx images.The combination seems to work fine on BH .Maybe try once with one off these images.Unfortunatly you will not have the advantages of openvix.
Last edited by bellejt; 02-08-16 at 15:26.
VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
Triax 88 cm rotor single LNB 30 E- 40 W
1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E
What cam are you using?
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Also with your setup, do you have 3 satellite feeds coming into your room going into Tuner A, Tuner B and Tuner C?
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)