Great thanks for that i kind of know that yet i wish to fit one regardless that is why i am asking for the fan sizeOriginally Posted by Alec
I should think a standard 50mm low noise should be okay. You need to check the voltage on basic control. It is probable 12v or ask the specifications of the fan that is with a hard drive from a supplier.
Its only a small fan, off top of my 3cm and I would not recommend fitting a 3rd party fan that has not been tested with variable speed fan control. Really dont see the point of this thread, fan is not needed without HDD, if it was TM would have had one factory fitted
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
Hi mate.please don't get me wrong but the point of the thread was for me to attain any information about the the correct specs of the fan used in this box so i could pre buy one ready to fit....Needed in the box or not in your opinion I want to fit one..I don't know why folks are making a big deal out of stuff...all i want is the fan size..never mind Many thanks for your infoIts only a small fan, off top of my 3cm and I would not recommend fitting a 3rd party fan that has not been tested with variable speed fan control. Really dont see the point of this thread, fan is not needed without HDD, if it was TM would have had one factory fitted
Its not just about the size, the fan also need to be compatible with variable speed control and have correct fitting plug to fit to motherboard. If they're not compatible with variable speed they will burn outits been tested.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
precisely why i asked on here for advice.Its not just about the size, the fan also need to be compatible with variable speed control and have correct fitting plug to fit to motherboard. If they're not compatible with variable speed they will burn out
For anyone else who may want to know this...
The fan is 40mm x10mm.I have fitted a Fractal Design SILENT SERIES R2 40MM x 10mm
bcbulut (24-09-13),DaMacFunkin (13-10-13)
Very pleased with my Nano ( from the sponsors ) but the fan is quite noisy. I do not have a hard drive or caddy installed, so would it be ok to turn the fan off via the Fan Control in the Menus.
Posting Permissions
Reply With Quote
