Cannot flash My Duo 4k

[carlosjac]

I am trying to flash my box with the latest version. The box does not recognise the USB stick, I have reverted back to an original stick that I knew worked, with an older version on the image on 5ish I think. The box does not recognise this one. It boots up to a Openvix screen, i think from the hard drive, but I cannot do anything from there.

I can see the cox on the network and can connect to it and see the files on the hard drive. I have a backup image on the box could I just extract that and copy the files back onto the hard drive?

thanks in advance

[twol]

Online flash the box.
Short press Blue button -> ViX plugin
1. BackupManager - backup settngs(although this should eb default for next step)
2. ImageManager —> Yellow button download latest image from OpenViX
3.Blue button -flash image
4. On reboot select settinsg backup and install plugins
5. Image should be latest with your settings restored

[adm]

I am trying to flash my box with the latest version. The box does not recognise the USB stick, I have reverted back to an original stick that I knew worked, with an older version on the image on 5ish I think. The box does not recognise this one. It boots up to a Openvix screen, i think from the hard drive, but I cannot do anything from there.

I can see the cox on the network and can connect to it and see the files on the hard drive. I have a backup image on the box could I just extract that and copy the files back onto the hard drive?

thanks in advance

There is more than one way to update see......
https://www.world-of-satellite.com/s...mething-else#3

With the USB stick method.
Put the box into deep standby and switch the box off at the mains.
Remove all USB connected devices and just plug in the stick with the upgrade
Switch the box on via the mains
If you get the prompt to press something like the OK button it is the control on the box and not the one on the remote.

[carlosjac]

The Box now sees the USB stick and must be accessing it as the light on the stick is flashing. The screen goes from the initial VUD+ to Openvix and then stops there. There is no access to the box using the remote control and therefore no menus! I have left it in this position for 10mins, should it have worked by now ?

[carlosjac]

is there anyway I can put it back to factory settings?

[carlosjac]

it is stuck on this screen !

[adm]

is there anyway I can put it back to factory settings?

What happens if you press the menu button on your remote when you get this screen?

Have you shut down the box and then removed the USB stick with the update?

[carlosjac]

no buttons work on the remote

yes have removed the usb stick, I don't think the upgrade worked,

[adm]

no buttons work on the remote

yes have removed the usb stick, I don't think the upgrade worked,

Just make sure that you downloaded the correct upgrade for your box. Different models have different upgrades. For instance, do you have a VU+ Duo4K or a VU+ Duo4K SE
https://www.openvix.co.uk/index.php/...u-plus-images/

Make sure that all you have on the USB stick is the upgrade and in the format and described in the flashing guide

https://www.openvix.co.uk/openvix-builds/Guides%20and%20Tutorials/Flashing%20Guides/VU+%20USB%20Flashing%20Guides/How%20to%20flash%20a%20VU+%20Duo%204k.pdf

(substitute v6.2.011 for the version shown in the guide)

Re-flash again. Note that the box may be unresponsive and not display anything on the front panel for a couple of minutes during the upgrade - whilst you are watching this seems like an eternity

[carlosjac]

no luck, tried with different sticks and different formats, the sticks light up but not sure the info is getting loaded into the box HELP! please !

[twol]

OK - in post 1 you say you can access the box, so if you can telnet into the box using putty for example
1 enter login (this will be root) if it asks for password, whatever you last used.
2. enter enigma2
Post the output or extract from towards the end

[adm]

no luck, tried with different sticks and different formats, the sticks light up but not sure the info is getting loaded into the box HELP! please !

Do you get any front panel indications that the box is being programmed? Albeit for the SE version of your box the Youtube video gives some indication of what you may expect.
https://www.youtube.com/watch?v=Q2T36HMlpa8

Have you tried --- after flashing turning off the at mains switch and leaving it off for 2 minutes (to let internal power supplies fully discharge) before turning the box back on. There is a very small chance that the software has crashed and removing the power (and waiting for internal voltages to discharge) gives the box a clean cold boot on the next switch on.

[carlosjac]

OK - in post 1 you say you can access the box, so if you can telnet into the box using putty for example
1 enter login (this will be root) if it asks for password, whatever you last used.
2. enter enigma2
Post the output or extract from towards the end

Sorry what file should i be looking at in the enigma2 directory?

[carlosjac]

I do not get any indications from the front panel and I do not et asked to press the power button

[twol]

Sorry what file should i be looking at in the enigma2 directory?

If you can telnet into the box, does it ask for login?
If so login and then enter enigma2