I am new to satellite systems ,and looking for some help and guidence. Being a complete novice how do I install a new image on myTM800HD
I am new to satellite systems ,and looking for some help and guidence. Being a complete novice how do I install a new image on myTM800HD
Menu->Setup->Network->[Blue] button ("Update")
or
Download an image file (from here.)
Place the image file into the root folder of the USB mem. stick
Rename the image file to exactly this: TM800_update.bin (lettercase is important!!!)
Power off at the back.
Power-on and as soon as the front display says "Technomate", start pressing (press-release-press-release, etc.) the "Power/Standby" button on the front pannel,
untill you see "MinoRoot" in the front display - now stop pressing anything, and wait
untill you see something like "<xxx.xxx.xxx.xxx" in the front display, where the xxx.xxx.xxx.xxx is usually 127.0.0.1, or whatever your receiver's current IP address is at the moment.
Now, press the "Menu" button on the fron pannel and observe the rapidly changing letters and numbers in the front display indicating the progress of the image load.
Ideally, at the end of the falsh, the box should restart and take you through the "1st time Wizard".
If not, try a later image.
If that still doesn't help, definitelly do a factory reset before you re-flash again.
Last edited by Sicilian; 22-07-10 at 12:29. Reason: removed reference to another forums, sorry.
Southern hemisphere, LNB1: 68.5E, LNB2: 15.8E, LNB3: 36.0E, 2x 4way Diseqc switches
Dsq1: TM9100 (DS4.4 20100922) loopback to "Victory" (FTA receiver)
Dsq2: TM800HD (UR1.0 20101028 Beta)
Brilliant mate , my next task is softcams.........
That's a non-issue CCcam214 runs the moment you flash the image. If you have a problematic card, Newcs is available for download in add-ins menu. Having said that - the very basic card reader functionality is not yet available!!! So, you are down to k e y z or ... whatever; for the time being. New image is only expected 'round 15th August. Alternativelly, you can use one of these USB extterna card-readers that have indeed been confirmed to work fine. I however know nothing about them, so... google/ask...
Southern hemisphere, LNB1: 68.5E, LNB2: 15.8E, LNB3: 36.0E, 2x 4way Diseqc switches
Dsq1: TM9100 (DS4.4 20100922) loopback to "Victory" (FTA receiver)
Dsq2: TM800HD (UR1.0 20101028 Beta)
dodd (22-07-10)
Technomate TM-800HD Beta tester. TM 6900 HD, TM5400CI+ super, ClearOS servers, smargo+ x5,Spiderbox 9000hd, spiderbox 5000sd, Openbox s9HD, Sky HD multiroom full sub.
Dishes, Main dish is 1.2m Triax, 1.1m prime focus, 80cm moterised, & zone2 sky dish.
Cams and cards are, Diablo 2.3 & diblo wifi, Dragoncam v2, Gamma,Titanium 1,2, Canal digital,DigitALB, JSC 1-10, Nova Gr, many ice scrapers & old cams.
Loads of other satellite kit.
Satellite ark is 45w - 36e.
No problem?!? Lucky you, must be very low expectations... LOL!
- No usable PVR (does not record video on encrypted channels at all - have a look at the file size)
- No usable playback - video & audio recorded on FTA channels freezes the box after 1-2 minutes.
- ... consequently, no timeshift
- No generic media playback functionality yet (audio formats/video formats)
- No media management interface worth mentioning
On top of this, all the bugs reported in the meantime - too many to list here ...
Southern hemisphere, LNB1: 68.5E, LNB2: 15.8E, LNB3: 36.0E, 2x 4way Diseqc switches
Dsq1: TM9100 (DS4.4 20100922) loopback to "Victory" (FTA receiver)
Dsq2: TM800HD (UR1.0 20101028 Beta)