As HDMI-cec is widely spread amongst most consumer AV electronics I was wondering if any functionality like that is available for the Vu+ receivers? does anybody have any info about that....?
As HDMI-cec is widely spread amongst most consumer AV electronics I was wondering if any functionality like that is available for the Vu+ receivers? does anybody have any info about that....?
VU+ Uno, VIX 2.3 , 1TB HDD WD Caviar Green
Panasonic TX-L37DT35
Visiosat SMC80 Quad Monoblock 4.3
It can be found in Black Hole Images and is being developed by the team along with pli who have now come on board.
It is at a very early stage and work well with most Samsung TV's and is limited with most others.
It will take time I think but it will get there.
Vu Duo 4K - Vu + Solo4K - Vu + Uno4K - Vu+Uno - Vu+Ultimo4K - Vu+ Zero - Vu+Solo-SE (In Black Evo ) - PrismCube
Ezee (16-09-11)
HDMI-CEC works in Openpli, VTI and Blackhole. I hope it will work in next ViX.
Ezee (16-09-11)
It will be in next release however as stated above there is still limited functions for most tvs. Thankfully I have a Samsung and the remote functions perfectly for everything except the recording playback function has no assigned key
Sent from my HTC Desire HD using Tapatalk
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
ET8500
80cm motorised triax TD88
As long as the power functions will be enabled I am happy already, now I am getting seriously motivated to pimp the receiver with the coming VIX Image release. Any clue when that can be?
VU+ Uno, VIX 2.3 , 1TB HDD WD Caviar Green
Panasonic TX-L37DT35
Visiosat SMC80 Quad Monoblock 4.3
HDMI CEC works with my LG scarlet but not my Philips
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM
IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ↓
Works to an extent with my panasonic ... but it is very temperamental, and doesn't fully do as you would expect... Also, doesn't pick up the viera link, only works when the box itself sends the commands to the tv...
hmmm bummer; I am using the UNO on a panasonic. Is to be expected that it will improve it's compatibility with the next version of the VIX image or is this a panasonic problem?
VU+ Uno, VIX 2.3 , 1TB HDD WD Caviar Green
Panasonic TX-L37DT35
Visiosat SMC80 Quad Monoblock 4.3
Haven't really tested much ... might just be a user error, as I haven't had time to test properly, too much stuff IRL to sort out... But I do remember reading something from Blackhole that their hdmi-cec doesn't work on panasonic. Whether they have exactly same problems as I had, or that their's doesn't work at all, I don't know. But, I would imagine it's just a case of evolving the code, and getting it sorted to work correctly
well that is beyond me, then I will have to wait until someone capable of doing that will sort this.
VU+ Uno, VIX 2.3 , 1TB HDD WD Caviar Green
Panasonic TX-L37DT35
Visiosat SMC80 Quad Monoblock 4.3
Although HDMI-CEC will be available in ViX soon, I will never use it. It will never bring the ease to use as the R/C's in my signature are already doing for ages............
Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.
i agree
i dont like ti and when i didnt know what it was i was confused
and as for my dad and my brother well they almost chucked the box throw a window as it was so annoying and they couldnt figure out what it was
the box would turn off when tv went off and then restart when tv went back on after ages and then go into bouquet mode
so unless you pressed exit first you could do anything as it was in VIX logo mode to start with not the channel you was watching
personally unless VIX is fixing bugs on it or developing it further i think it should just be removed full stop
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM
IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ↓
Or far more simple: the default value of the plugin should be "disabled".
Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.
I find it works very good on my Samsung lcd. There is an option on the tv to select it with cec on or off. All works perfectly with no conflicts eg. Power button. Only thing missing is recordings button control. So would agree with vuplus nl that maybe an option in menu to either switch on or off cec but definitely not to remove it altogether as is not working for some but is for others.
Sent from my HTC Desire HD using Tapatalk
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
ET8500
80cm motorised triax TD88
It does work for some, and not for others.
The whole point is, that suddenly a plugin has been added doing all kind of unexpected things, just because it is enabled by default.
Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.