Ich habe eine VU+ Uno mit W-LAN Stick Vu+ Wireless USB W-LAN Adapter 150Mbps 2,4GHz (Chipatz :Ralink RT3070).
Ich kann nur WLAN manuell eirichten, heißt notgedrungen mit LAN eine Verbindung zur Box herstellen, dann ersetze ich
ich folgende Dateien:
1. interfaces mit folgenden Inhalt
Code:# automatically generated by enigma 2 # do NOT change manually! auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 192.168.2.100 netmask 255.255.255.0 gateway 192.168.2.1 pre-up /usr/sbin/wpa_supplicant -iwlan0 -c/etc/wpa_supplicant.conf -B -dd -Dwext post-down wpa_cli terminate iface eth0 inet dhcp
2. wpa_supplicant.conf
Code:#WPA Supplicant Configuration by enigma2 ctrl_interface=/var/run/wpa_supplicant eapol_version=1 fast_reauth=1 ap_scan=1 network={ ssid="WLAN-12345678910" ist abgeändert scan_ssid=0 key_mgmt=WPA-PSK proto=WPA RSN pairwise=CCMP TKIP group=CCMP TKIP psk="12345678910" ist abgeändert }
Danach gebe ich in Telnet folgenden Befehl ein:
Code:ifup wlan0
Dann mache ich einen Neustart meiner Box, anschließend habe ich WLAN Empfang und alles ist bestens.
Sobald ich aber meine Uno neustarten muss oder runterfahre habe ich danach keinen WLAN Emfang mehr.
Ich weiß mir leider keinen Rat mehr, was ich machen könnte bzw. woran es liegt.
lg Akki