Have you set speed for the card reader?
BOXKEY: /dev/sci0 XX XX XX XX
SMARTCARD CLOCK FREQUENCY: /dev/sci0 3580000
Have you set speed for the card reader?
BOXKEY: /dev/sci0 XX XX XX XX
SMARTCARD CLOCK FREQUENCY: /dev/sci0 3580000
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
if i'm going to try oscam i'm going to need a really got tut, and a lot of your help
but atm everything i've tried has not worked, everything makes no difference i'm still getting at best ecm times of 246 ms.
regards: canthackit
I have never tried one of these box's but don't you have a smargo Hackit ?
I am sure the rest of the guys here know if smargos work with this box.
Vu Duo 4K - Vu + Solo4K - Vu + Uno4K - Vu+Uno - Vu+Ultimo4K - Vu+ Zero - Vu+Solo-SE (In Black Evo ) - PrismCube
i used to overclock to 6.8Mhz this was on the Duo never had a problem with that although a while back i did drop it down to 5.5 Mhz and thats' what it is now.
donnie
yes i was thing along them lines as well aint used it for years now mate
now that you can overclock
got to try and remember how to set it up, do you remember the old was it tty orr tts...think i need the tut for that as well
thanks & regards: canthackit
With the ecm times at 246 is the picture stable, if it is ignore the ecm time cos from tests I know they're wrong.
Other option is smargo in the rear or Oscam, as Donnie says Oscam is the way to go.
Use oscam from hereThis version enigma2-plugin-cams-oscam.1.00.4863_1.0_mipsel.ipkCode:http://www.4shared.com/dir/wnyHV50A/VIX_CAMS.html
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
This might help http://www.world-of-satellite.com/sh...ht=smargo+card
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
so tihs is where i am atm
top slot.
set to /sci1
clock speed 5.5 mhz
just checked the coax it wasn't tight enough tightned it properly thought that was the answer but no still freezing and mosacing.........it's driving me barmy.
yes thats what i want Boss thanks
Another good thread http://www.world-of-satellite.com/sh...ht=smargo+card
I can test in the morning to see what works best.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
SERIAL READER : /dev/ttyUSB0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000
Vu Duo 4K - Vu + Solo4K - Vu + Uno4K - Vu+Uno - Vu+Ultimo4K - Vu+ Zero - Vu+Solo-SE (In Black Evo ) - PrismCube
are the drivers in place nowadays or do will still have to load them manually?
are you sure its tty donnie
cant remember the path to them
From memory as I have not used my smargos for a long time, it is tty for OE1.6 and tts for OE1.5
Vu Duo 4K - Vu + Solo4K - Vu + Uno4K - Vu+Uno - Vu+Ultimo4K - Vu+ Zero - Vu+Solo-SE (In Black Evo ) - PrismCube
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
Donnie (03-06-11)
done all that and it aint worked.
so i've done something wrong all the line
card chip up or down?