hi does anyone know what make of dish and motor the attatched pics are please no markings on any of the dish or motor any info would be great many thanks in advance
hi does anyone know what make of dish and motor the attatched pics are please no markings on any of the dish or motor any info would be great many thanks in advance
the dish is a channel master
the motor looks like a htoh jaeger 1224
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM
IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ↓
from what i can see this dish will only move from east to west it does not have any up and down movement will that affect what satellites i can recive and is it worth buying a v box (im in birmingham uk ) or am i better off just getting another dish and motor thanks in advance for any help or advice
i'd honestly buy a new motor at the very least. for example our sponsor sells the technomate tm2600 for £39.25
Code:http://www.world-of-satellite.co.uk/DiSEqC-Motors/TM-2600-Super
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
wrigley (06-05-11)
yea i looked at them but the only prob is the dish is 1m and there doesnt seem any way to fit the dish to the motor as its just a square plate and 4 bolts on the back of dish all trial n error at the mo lol thanks for your sugestion tho
the dish is the most important part of the setup in my opinion, and it is worth doing it rite first time with the best you can afford. i would not in a million years use that dish or motor, i would personally buy new.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
That channel master dish is meant for a pole mount and actuator motor, not suitable for a diseqc motor.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
wrigley (06-05-11)
look at this setup this is mine that now belongs to my dad
IMG_0336.JPG
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM
IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ↓
you need to set your dish on high place upon your floor and then start the motor i hope it will give you a lot of tv channels and even i am also using this dish and i am very happy because all the pakistanis and other world channels are available upon this dish
I have a channel master, controlled via a V box, with a 36v motor,
the square plate fits to the back of the dish, ( and I think your dish is a 1.2 mtr ) and really needs a 36v motor, the elivation of the dish is controlled via the bolts connecting to the plate, a good motor will cost around £200, and to get the best from the dish, a feed horn/quality lnb is worth having,yea i looked at them but the only prob is the dish is 1m and there doesnt seem any way to fit the dish to the motor as its just a square plate and 4 bolts on the back of dish all trial n error at the mo lol thanks for your sugestion tho
I will try and post a few photos of the critical componants later
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams
wrigley (28-05-11)
Unless it is a very early model (pre 1990's) the motor is not a Jaeger 1224 as it looks quite a bit different to the 1224's that have been sold for a good few years.
Although I am not sure what make it is, it is definitely a 36 volt motor with H to H capability judging by the pictures.
The Bishop
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable