I have zgemma h7s running openvix 6.4 connected to an old Samsumg TV (from around 2007). I can't seem to get the box to control the volume or power the tv on or off. I have a fire stick connected to the TV and it can do both functions without issue. The zgemma work fine on my newer sony tv. Any ideas what I should try to get it up and running. I should add the box controls a newer tv without issue. Odd the fire stick had no problem.
Thanks
Snip of the hdmi log if that helps
[0x00]
Rx: 22:07:36 <Report Physical Address> < 84 20
Rx: 22:07:36 <Reporting Device Vendor ID>< 87 00
Rx: 22:07:37 <Active Source> < 82 20
Rx: 22:07:39 <Give Device Power Status> < 8F 00
Tx: 22:07:39 <Report Power Status> > 90 00 [0x00]
Rx: 22:07:40 <Active Source> < 82 20
Rx: 22:07:41 <Report Physical Address> < 84 20
Rx: 22:07:41 <Reporting Device Vendor ID>< 87 00
Rx: 22:07:45 <Give Device Power Status> < 8F 00
Tx: 22:07:45 <Report Power Status> > 90 00 [0x00]
Rx: 22:07:46 <Feature Abort> < 00 9E
Rx: 22:07:46 <Give Device Power Status> < 8F 00
Tx: 22:07:47 <Report Power Status> > 90 00 [0x00]
Rx: 22:07:48 <Give Device Power Status> < 8F B5
Tx: 22:07:49 <Report Power Status> > 90 00 [0x00]
Rx: 22:07:50 <Give Device Power Status> < 8F 00
Tx: 22:07:51 <Report Power Status> > 90 00 [0x00]
Rx: 22:07:52 <Give Device Power Status> < 8F 00
Tx: 22:07:53 <Report Power Status> > 90 00 [0x00]
Rx: 22:08:21 <Feature Abort> < 00 9E
Rx: 22:08:30 <Active Source> < 82 20
Rx: 22:08:57 <Feature Abort> < 00 9E
Rx: 22:09:34 <Feature Abort> < 00 9E
Rx: 22:10:10 <Feature Abort> < 00 9E
Rx: 22:10:46 <Feature Abort> < 00 9E
Rx: 22:11:22 <Feature Abort> < 00 9E
Rx: 22:11:59 <Feature Abort> < 00 9E
Rx: 22:12:35 <Feature Abort> < 00 9E
Rx: 22:13:11 <Feature Abort> < 00 9E
Rx: 22:13:47 <Feature Abort> < 00 9E
Tx: 22:25:32 <Standby>