Without a TDT/TOT signal, the time is reset to zero even though NTP update is enabled
Code:
< 1718.6146> [eConsoleAppContainer] Starting /usr/bin/grab
< 1719.2098> [eConsoleAppContainer] user kill(SIGKILL)
< 1842.6918> [NetworkTime] Updating from NTP
< 1842.6920> [Console] command: ['/usr/sbin/ntpd', '/usr/sbin/ntpd', '-nq', '-p', 'sk.pool.ntp.org']
< 1842.6921> [eConsoleAppContainer] Starting /usr/sbin/ntpd
< 1843.8221> [Console] finished: /usr/sbin/ntpd
< 1843.8222> [NetworkTime] setting E2 time: 1703622660.4975019
< 1843.8260> [StbHardware] Set RTC to Ut 26 dec 2023 21:31 (rtc_offset = 3600 sec.)
< 1843.8267> [StbHardware] Error: setRTCtime failed!
< 1843.8268> [eDVBLocalTimerHandler] setUseDVBTime: current=ntp, new=ntp
< 1843.8282> Timing out client: IPv6Address(type='TCP', host='::ffff:192.168.1.50', port=59426, flowInfo=0, scopeID=0)
< 1843.8288> Timing out client: IPv6Address(type='TCP', host='::ffff:192.168.1.50', port=59462, flowInfo=0, scopeID=0)
< 1882.3488> [eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
< 1882.3491> [eDVBLocalTimerHandler] RTC time is 01:31:29
< 1882.3491> [eDVBLocalTimerHandler] Receiver time is 21:31:39
< 1882.3491> [eDVBLocalTimerHandler] RTC to Receiver time difference is 1703620810 seconds
< 1882.3491> [eDVBLocalTimerHandler] set Linux Time to RTC Time
< 1924.3306> [timer.py] timewarp - re-evaluating all processed timers.
< 1924.3307> [timer.py] timewarp - re-evaluating all processed timers.
< 2020.0544> [AutoTimer] current auto poll 1970-01-01 01:33:46
< 2020.0546> [AutoTimer] Auto Poll Started
< 2020.0548> [AutoTimer] No changes in configuration, won't parse
< 2020.0561> [Task] job Components.Task.Job name=AutoTimer #tasks=0 completed with [] in None
< 2020.0565> [AutoTimer] next auto poll at 1970-01-01 02:03:46