Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Are you sure that is what happens.
Disabling autostart is not the same as switching it off now (which is what the Deactivate option does).
When I Disable Autostart that option text changes to Enable Autostart.
The option is there in case you want to change the setting. Having a swap file does no harm (does nothing, really) if you don't need it, but might save the system from crashing if you do
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD
Yes, the tick in the autostart box disappears then reappears immediately on both boxes (both running latest openvix) when you press the yellow remote button.
They are both "Manufacturer Enabled Swap Enabled at Startup".
There is no "Deactivate" option.
swapfile.jpg
I just thought the different swapfile sizes might have been affecting the memery available for larger video files.
Ah. You have a system with "manufacturer defined swap". As I recall, that means it gets turned back on even if you switch of off.
It's "only" file space (not memory) and corresponds to a few minutes of video in terms of storage space.
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD
Flashed free slot with 6.4.010 and was able to download all 4 latest e2 images one after the other without having to restart gui.
After settig up uni-cable lnb, re-scanning channels and re-installing plugins and settings (all by hand, not from settings file), I tried again. The second download stuck at 0% and I had to restart the gui.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Just to note, I experienced this today on my gbue4k.
To diagnose the refresh rate issue (another thread) I downloaded 6.4.010, intending to clean flash to another multiboot slot for testing. I thought I may as well download 6.4.009 as well so that I could revert to that to fix the other issue if needed. But it got stuck waiting. I couldn't back out, I turned the power off to get out of it.
Just to add- I also changed skin to magic (less harsh on OLED), but even when Ichanged it back to default skin it failed after first or second consecutive download.
These are the plugins and tuner settings.
plugins.jpgtuners.jpgtuner A.jpg
Here are the latest debug logs, one before and one after it failed to download a second image (stuck at 0/100).
Enigma2_debug_2023-12-14_17-38-38.logEnigma2_debug_2023-12-14_18-02-17.log
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K