Hi, I'm new to satellite use and was recently given an H9 Twin box by my son who had it connected to Sky UK.
I live in an apartment building in Israel, having 38 apartments, where YES TV is the supplier with a common dish on the roof. I understand Yes uses Amos 3 & 7 satellites.
There's a telecoms cupboard outside the apartment where the main satellite cable comes in and out to the next floor (thick black cable) connecting to a 4 way splitter (4 apartments per floor). From there a thinner white cable goes into smaller oblong box and then the cable to my apartment connects to its other end.
20231024_112310.jpg20231024_112229.jpg
Is this small box the LNB or is this on the dish? On the label is typed Zinwell Sloping Type In-Line Amplifier 2 Way Passive, part no. SA-10DSA-R600-Y, above the output connector is typed 950-2150MHz, Injector Out.4-600MHz-1dBBoth pictures have uploaded sideways so the in and out cables in pic 1 are at the top and bottom of the square shaped splitter. The box to the right of the oblong box in picture 2 is an unrelated cable TV box.
I 've connected the coax cable in the apartment to the box but I don't a signal on scanning for satellites.
I assume I'll have to download some firmware for the box?
Any help in getting this to work would be greatly appreciated.
TIA.