Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 1 of 2 12 LastLast
Results 1 to 15 of 27

Thread: Few problems with bouquets and display.

  1. #1

    Title
    Senior Member
    Join Date
    Feb 2012
    Location
    Rojales, Alicante, Spain
    Posts
    117
    Thanks
    8
    Thanked 12 Times in 12 Posts

    Few problems with bouquets and display.

    I recently purchased the SF8008 and this week decided to set it up to replace my Vu+ Duo2, I did have some problems while setting it up with my Sony 4K Tv, for some unknown reason when whating a 4K source after a few seconds the picture flickers and freezes but the audio carries on, also when the unit is put into standby after a few minutes it shows the attached message on the TV screen. With the Vu+ I use to listen to radio stations by pressing the radio button on the remote, I have tried really hard to find the radio bouquet via the remote on this model but cant find it anywhere. Any help on these issues would be greatly appreciated.

    PXL_20230518_110948437.jpg

  2. #2
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,618
    Thanks
    1,009
    Thanked 2,964 Times in 2,305 Posts
    Quote Originally Posted by bangorbob View Post
    I recently purchased the SF8008 and this week decided to set it up to replace my Vu+ Duo2, I did have some problems while setting it up with my Sony 4K Tv, for some unknown reason when whating a 4K source after a few seconds the picture flickers and freezes but the audio carries on, also when the unit is put into standby after a few minutes it shows the attached message on the TV screen. With the Vu+ I use to listen to radio stations by pressing the radio button on the remote, I have tried really hard to find the radio bouquet via the remote on this model but cant find it anywhere. Any help on these issues would be greatly appreciated.

    PXL_20230518_110948437.jpg
    So which image and release?
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
    ------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
    .......................
    Vu+ Uno4KSE, Dreambox dm900
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
    Zgemma H9 C/S into Giga4K

  3. #3

    Title
    Senior Member
    Join Date
    Feb 2012
    Location
    Rojales, Alicante, Spain
    Posts
    117
    Thanks
    8
    Thanked 12 Times in 12 Posts
    Quote Originally Posted by twol View Post
    So which image and release?
    Sorry my bad, OpenVix 6.3.007

  4. #4
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,541
    Thanks
    6,517
    Thanked 9,224 Times in 6,287 Posts
    If you are using ABM and creating Freesat/Freeview bouquets, there is a hack to treat them like TV services. There will be bouquets for Radio channels.

  5. #5

    Title
    Senior Member
    Join Date
    Feb 2012
    Location
    Rojales, Alicante, Spain
    Posts
    117
    Thanks
    8
    Thanked 12 Times in 12 Posts
    Quote Originally Posted by abu baniaz View Post
    If you are using ABM and creating Freesat/Freeview bouquets, there is a hack to treat them like TV services. There will be bouquets for Radio channels.
    OK, not sure why I need a hack as before on Vu+ when I pressed the Radio buttob it brought up the Radio bouquet, I have checked all the bouquets created on this box but no Radio one exists, I'm using the Sky Northern Ireland SD custom with channel swap which was the same on the Vu+ If I do need a hack can you please tell me what I need to do, Thanks.

  6. #6
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,541
    Thanks
    6,517
    Thanked 9,224 Times in 6,287 Posts
    If you are not using Freesat/Freeview, what I said does not apply. You hadn't said what your bouquets were, so I guessed.

    What do you see when you open your bouquets, then press radio? Post a picture please.

    Edit:
    Just for info, the hack is in the provider files already. The radio bouquets are in the TV bouquets as in this picture. You are not using Freeview/Freesat, so this does not apply to you. I look forward to the answer as to what you see.
    Attached Images Attached Images

  7. #7

    Title
    Senior Member
    Join Date
    Feb 2012
    Location
    Rojales, Alicante, Spain
    Posts
    117
    Thanks
    8
    Thanked 12 Times in 12 Posts
    Quote Originally Posted by abu baniaz View Post
    If you are not using Freesat/Freeview, what I said does not apply. You hadn't said what your bouquets were, so I guessed.

    What do you see when you open your bouquets, then press radio? Post a picture please.
    OK, firstly on this remote there is no Radio button just a TV/Radio button, beside it is a FAV button, ressing the TV/Radio button bring up the bouguet list and a second press takes you into the bouquet that you are watching. The FAV button also opens up the bouguet list.

    PXL_20230518_144519564.MP.jpg 1_0_19_514A_810_2_11A0000_0_0_0_20230518164726.jpg 1_0_19_514A_810_2_11A0000_0_0_0_20230518164656.jpg 1_0_19_514A_810_2_11A0000_0_0_0_20230518164631.jpg

  8. The Following User Says Thank You to bangorbob For This Useful Post:

    abu baniaz (18-05-23)

  9. #8
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,541
    Thanks
    6,517
    Thanked 9,224 Times in 6,287 Posts
    Sorry, I don't have an answer if the TV/Radio button is not switching modes. It used to do so before. Hopefully someone with same receiver and remote will assist with solution.

  10. #9
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    13,945
    Thanks
    2,062
    Thanked 5,145 Times in 3,395 Posts
    Please get a debug log of pressing the tv/radio button a few times.
    Help keep OpenViX servers online.Please donate!

  11. #10

    Title
    Senior Member
    Join Date
    Feb 2012
    Location
    Rojales, Alicante, Spain
    Posts
    117
    Thanks
    8
    Thanked 12 Times in 12 Posts
    Quote Originally Posted by Huevos View Post
    Please get a debug log of pressing the tv/radio button a few times.
    Hopefully this is the debug log Enigma2_debug_2023-05-19_10-40-51.log

  12. #11
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    13,945
    Thanks
    2,062
    Thanked 5,145 Times in 3,395 Posts
    So they recently changed the remote for that model which is why OpenViX doesn't know it needs special handling:
    https://github.com/oe-mirrors/brandi...8565d2fe0b72da

    Add the following update and report back:
    https://github.com/OpenViX/enigma2/c...5e7548b3597ec1
    Help keep OpenViX servers online.Please donate!

  13. The Following User Says Thank You to Huevos For This Useful Post:

    abu baniaz (19-05-23)

  14. #12

    Title
    Senior Member
    Join Date
    Feb 2012
    Location
    Rojales, Alicante, Spain
    Posts
    117
    Thanks
    8
    Thanked 12 Times in 12 Posts
    Quote Originally Posted by Huevos View Post
    So they recently changed the remote for that model which is why OpenViX doesn't know it needs special handling:
    https://github.com/oe-mirrors/brandi...8565d2fe0b72da

    Add the following update and report back:
    https://github.com/OpenViX/enigma2/c...5e7548b3597ec1
    Huevos, could you please give me a quick guide as to install this change, sorry for being a bit stupid with this.

  15. #13
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    13,945
    Thanks
    2,062
    Thanked 5,145 Times in 3,395 Posts
    Add the attached file to /usr/lib/enigma2/python/Components (by ftp) and then restart the receiver.
    Attached Files Attached Files
    Help keep OpenViX servers online.Please donate!

  16. #14

    Title
    Senior Member
    Join Date
    Feb 2012
    Location
    Rojales, Alicante, Spain
    Posts
    117
    Thanks
    8
    Thanked 12 Times in 12 Posts
    Quote Originally Posted by Huevos View Post
    Add the attached file to /usr/lib/enigma2/python/Components (by ftp) and then restart the receiver.
    Thank You that has sorted that issue with the Radio Bouquets. Hoping now that someone might be able to shed some light on why the unit after being put into standby after a few minutes puts a display on the TV screen.

  17. The Following User Says Thank You to bangorbob For This Useful Post:

    abu baniaz (19-05-23)

  18. #15
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    13,945
    Thanks
    2,062
    Thanked 5,145 Times in 3,395 Posts
    Displays what?
    Help keep OpenViX servers online.Please donate!

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.