Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.

View Entry Info: CCCAM does not work after a power failure

Category:
Possible Bug
What ViX Image build number are you using?
Please provide your ViX Team image build number. Menu > Information > About > Build number > ENTER THIS NUMBER e.g. 4.2.028
6.2.11
Have you tried a flash WITHOUT settings restore?
Have you tried this? PLEASE SELECT YES OR NO.
Yes
Have you tried a flash WITH settings restore?
Have you tried this? PLEASE SELECT YES OR NO.
Yes
Page 1 of 2 12 LastLast
Results 1 to 15 of 23

Thread: CCCAM does not work after a power failure

  1. #1

    Title
    Junior Member
    Join Date
    Nov 2022
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts

    CCCAM does not work after a power failure

    Since the 6.2 release, if the sat-receiver (VU+ SOLO2) shuts down due to a power failure, the CCCAM will fail after restart.

    The transmission is interrupted every 10 seconds and restarts after 10 seconds.

    The only way to solve the error is to reinstall the image.

  2. #2
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,618
    Thanks
    1,009
    Thanked 2,964 Times in 2,305 Posts
    Quote Originally Posted by k2laci View Post
    Since the 6.2 release, if the sat-receiver (VU+ SOLO2) shuts down due to a power failure, the CCCAM will fail after restart.

    The transmission is interrupted every 10 seconds and restarts after 10 seconds.

    The only way to solve the error is to reinstall the image.
    debug log?
    How are you starting, stopping CCcam?
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
    ------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
    .......................
    Vu+ Uno4KSE, Dreambox dm900
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
    Zgemma H9 C/S into Giga4K

  3. #3

    Title
    Junior Member
    Join Date
    Nov 2022
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts
    After restarting the satellite receiver, the picture freezes for 10 seconds, then restarts and stops again.

    CCCAM start/stop does not help.

    Restore settings does not help.

    Only image re-flash and then restore settings helps.

  4. #4
    bellejt's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Dec 2013
    Posts
    1,862
    Thanks
    64
    Thanked 344 Times in 299 Posts
    convert and go to oscam maybe ?
    VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
    Triax 88 cm rotor single LNB 30 E- 40 W
    1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E

  5. #5
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,618
    Thanks
    1,009
    Thanked 2,964 Times in 2,305 Posts
    Quote Originally Posted by k2laci View Post
    After restarting the satellite receiver, the picture freezes for 10 seconds, then restarts and stops again.

    CCCAM start/stop does not help.

    Restore settings does not help.

    Only image re-flash and then restore settings helps.
    Can you post debug logs
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
    ------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
    .......................
    Vu+ Uno4KSE, Dreambox dm900
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
    Zgemma H9 C/S into Giga4K

  6. The Following User Says Thank You to twol For This Useful Post:

    deltec (03-11-22)

  7. #6
    deltec's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Jan 2014
    Posts
    767
    Thanks
    573
    Thanked 25 Times in 22 Posts
    This a strange one

  8. #7

    Title
    Member
    Join Date
    Apr 2011
    Location
    Ireland
    Posts
    94
    Thanks
    99
    Thanked 27 Times in 22 Posts
    My cccam stopped working also latest vix image, use for the wife's tivusat Italian channels, legit card in the box, I have a working oscam config that doesnt seem to work either anymore.
    Not sure how to debug or whats changed if anything

  9. #8

    Title
    Senior Member
    Join Date
    May 2019
    Posts
    118
    Thanks
    15
    Thanked 34 Times in 30 Posts
    Quote Originally Posted by BobbyC View Post
    My cccam stopped working also latest vix image, use for the wife's tivusat Italian channels, legit card in the box, I have a working oscam config that doesnt seem to work either anymore.
    Not sure how to debug or whats changed if anything
    what I read elswere was that from 12/21/2022 Tivusat wants to block cards on non-certified decoders.

  10. The Following User Says Thank You to urie For This Useful Post:

    BobbyC (27-12-22)

  11. #9

    Title
    Member
    Join Date
    Apr 2011
    Location
    Ireland
    Posts
    94
    Thanks
    99
    Thanked 27 Times in 22 Posts
    Holy crap, you are right, did a quick search for that. So we still have the all FTA RAI channels coming through, so at least that, … what can you do.

    Thanks for the tip urie

    https://www.broadbandtvnews.com/2022...fied-decoders/

  12. The Following User Says Thank You to BobbyC For This Useful Post:

    ziggysdomain (27-12-22)

  13. #10

    Title
    Member
    Join Date
    Sep 2020
    Posts
    55
    Thanks
    16
    Thanked 7 Times in 7 Posts
    Shoot! Is it likely a workaround will emerge? Any ideas?
    Vu+ Ultimo 4K

  14. #11

    Title
    Member
    Join Date
    Sep 2020
    Posts
    55
    Thanks
    16
    Thanked 7 Times in 7 Posts
    I see from the link to the original reporting at https://www.investireoggi.it/tech/ti...locca-tessere/ that legal cards should function in a cam. What led me to this forum a couple of years back was the fact that I couldn't get my card and cam to work in the VuPlusUltimo 4K. My older non-4K box was still working with another card and cam (I have to check this now after this recent change because it's currently not switched on) and BobbyC, who has reported the issue here, and The Sicilian helped me set up the 4K with a softcam. I'm wondering now if there might be a solution with a cam?
    Vu+ Ultimo 4K

  15. #12
    bellejt's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Dec 2013
    Posts
    1,862
    Thanks
    64
    Thanked 344 Times in 299 Posts
    from other site : You have to run oscam web interface, next run readers, and write emm from to Your Tivusat reader. That's all. After that Your card will be works properly.
    VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
    Triax 88 cm rotor single LNB 30 E- 40 W
    1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E

  16. The Following User Says Thank You to bellejt For This Useful Post:

    BobbyC (28-12-22)

  17. #13

    Title
    Forum Supporter
    Donated Member
    Join Date
    Oct 2022
    Location
    Berkshire England. 51.4°N, 0.9°W
    Posts
    93
    Thanks
    123
    Thanked 28 Times in 21 Posts
    There was a change to the way software CAMs work in OpenViX quite recently.
    I remember I moved my oscam configuration files to a different directory.
    I can't remember if it was an optional change, or whether I had to do it.
    I think it must have been due to this:
    https://www.world-of-satellite.com/s...ighlight=oscam

  18. #14
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    13,945
    Thanks
    2,062
    Thanked 5,145 Times in 3,395 Posts
    Quote Originally Posted by BrianG61UK View Post
    There was a change to the way software CAMs work in OpenViX quite recently.
    I remember I moved my oscam configuration files to a different directory.
    I can't remember if it was an optional change, or whether I had to do it.
    I think it must have been due to this:
    https://www.world-of-satellite.com/s...ighlight=oscam
    Using the new location is optional. This change was for MIPS boxes that had stability problems with OSCam.
    Help keep OpenViX servers online.Please donate!

  19. The Following User Says Thank You to Huevos For This Useful Post:

    BrianG61UK (27-12-22)

  20. #15

    Title
    Member
    Join Date
    Apr 2011
    Location
    Ireland
    Posts
    94
    Thanks
    99
    Thanked 27 Times in 22 Posts
    Quote Originally Posted by bellejt View Post
    from other site : You have to run oscam web interface, next run readers, and write emm from to Your Tivusat reader. That's all. After that Your card will be works properly.
    Can anyone elaborate on this,


    Sent from my iPhone using Tapatalk

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.