Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 14 of 14

Thread: GigaBlue UHD UE 4K cant record and watch

  1. #1

    Title
    Junior Member
    Join Date
    May 2021
    Posts
    16
    Thanks
    0
    Thanked 0 Times in 0 Posts

    GigaBlue UHD UE 4K cant record and watch

    hi everyone,

    I have a GigaBlue UHD UE 4K, tuner A is connected to a diseq switch for 13 + 19 + 28 ,the same for tuner B in a second diseq.
    When I record from 1 channel many channels in the same satellite become un-available I can’t watch them , so if I'm recording an episode from the worst season so far from a certain baking show on channel 4 then e4 and channel 5 and many others become greyed out and i cant watch them.

    the receiver is behaving as if it is a single tuner, i have tried to record from 4 channels then more channels were un-available. can you please tell me if i can fix this and how, or should i return it to amazon as it is still few days old order.

    im using the current openvix image 6.2.010 / Kernel / Drivers: 4.1.20 / 20200723


    thanx

  2. #2
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,618
    Thanks
    1,009
    Thanked 2,964 Times in 2,305 Posts
    Quote Originally Posted by gama7 View Post
    hi everyone,

    I have a GigaBlue UHD UE 4K, tuner A is connected to a diseq switch for 13 + 19 + 28 ,the same for tuner B in a second diseq.
    When I record from 1 channel many channels in the same satellite become un-available I can’t watch them , so if I'm recording an episode from the worst season so far from a certain baking show on channel 4 then e4 and channel 5 and many others become greyed out and i cant watch them.

    the receiver is behaving as if it is a single tuner, i have tried to record from 4 channels then more channels were un-available. can you please tell me if i can fix this and how, or should i return it to amazon as it is still few days old order.

    im using the current openvix image 6.2.010 / Kernel / Drivers: 4.1.20 / 20200723


    thanx
    post pictures of your sat setup, something wrong in the definition
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
    ------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
    .......................
    Vu+ Uno4KSE, Dreambox dm900
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
    Zgemma H9 C/S into Giga4K

  3. #3

    Title
    Junior Member
    Join Date
    May 2021
    Posts
    16
    Thanks
    0
    Thanked 0 Times in 0 Posts
    small update, i just notice that sat 28 was not connected in tuner b, now i have mended that, but if i record 2 programs at the same time many channels become un-available.

    1.jpg
    2.jpg
    3.jpg
    4.jpg
    5.jpg

  4. #4

    Title
    Senior Member
    Join Date
    Mar 2017
    Posts
    321
    Thanks
    13
    Thanked 50 Times in 43 Posts
    Tuner B does not look like its connected to 28.2, so once Tuner A is on 28.2 you dont have another

  5. #5

    Title
    Junior Member
    Join Date
    May 2021
    Posts
    16
    Thanks
    0
    Thanked 0 Times in 0 Posts
    as you can see in image 6 both tuners have 19 + 13 +28 , if i record 2 programs in 28, many channels in 28 are inaccessible as u can c in image 7, and 13 + 19 r completely inaccessible.

    6.jpg

    7.jpg

  6. #6
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,541
    Thanks
    6,517
    Thanked 9,224 Times in 6,287 Posts
    We have an existing thread where FBC tuners and universal LNBs have an issue on ViX. Fine on PLI apart from the efilepush lockup. In my opinion, issue could in the recording/timer files and not the tuning files.
    https://www.world-of-satellite.com/s...nactive-tuners


    "FBC Automatic" is "internal loop-through" when required. When not being used, they show as inactive.

    A universal LNB can only ever be in one of the four planes/modes/bands/whatever name floats your boat. i.e Hi, Low, Vertical or Horizontal. There will always be limitations when using a universal LNB. But the issue here is a bug that has not yet been fixed while others say it has.

  7. #7
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    13,945
    Thanks
    2,062
    Thanked 5,145 Times in 3,395 Posts
    If the bug is in record timer why does it show wrong in channel selection?
    Help keep OpenViX servers online.Please donate!

  8. #8

    Title
    Junior Member
    Join Date
    May 2021
    Posts
    16
    Thanks
    0
    Thanked 0 Times in 0 Posts
    i have now tried openpli image and with it i can record a maximum of 2 programs simultaneously and still can watch any channel from any satellite without any problem. so far default image + openatv 7 + openvix ,only allowed me to record 1 program that's it.
    Last edited by gama7; 05-10-22 at 20:18.

  9. #9

    Title
    Junior Member
    Join Date
    Nov 2021
    Posts
    21
    Thanks
    0
    Thanked 0 Times in 0 Posts
    There is simple solution go and buy FBC/SCR LNB like this https://www.pollin.de/p/red-opticum-...egacy-3-572212

  10. #10

    Title
    Junior Member
    Join Date
    May 2021
    Posts
    16
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by misiozol View Post
    There is simple solution go and buy FBC/SCR LNB like this https://www.pollin.de/p/red-opticum-...egacy-3-572212
    so this means the receiver is not defective, as i was thinking of returning it to amazon because of this issue and because gigablue support didn't help or offer any solution and because the remote control is not very responsive .

    thanks for your help everyone

  11. #11
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    13,945
    Thanks
    2,062
    Thanked 5,145 Times in 3,395 Posts
    Quote Originally Posted by gama7 View Post
    so this means the receiver is not defective, as i was thinking of returning it to amazon because of this issue and because gigablue support didn't help or offer any solution and because the remote control is not very responsive .

    thanks for your help everyone
    Can you please upload your settings file. /etc/enigma2/settings.
    Help keep OpenViX servers online.Please donate!

  12. #12

    Title
    Junior Member
    Join Date
    May 2021
    Posts
    16
    Thanks
    0
    Thanked 0 Times in 0 Posts
    yes of course :

    config.audio.volume=55
    config.av.downmix_aac=force_dts
    config.av.downmix_ac3=force_dts
    config.av.downmix_dts=passthrough
    config.av.dtshd=passthrough
    config.av.videomode.DVI=2160p
    config.av.videorate.2160p=60Hz
    config.lcd.standby=2
    config.misc.do_overscanwizard=false
    config.misc.enableGeolocation=false
    config.misc.firstrun=false
    config.misc.initialchannelselection=false
    config.misc.languageselected=false
    config.misc.startCounter=8
    config.misc.videowizardenabled=false
    config.misc.zapmode=hold
    config.Nims.0.diseqcA=192
    config.Nims.0.diseqcB=130
    config.Nims.0.diseqcC=282
    config.Nims.0.diseqcD=3601
    config.Nims.0.diseqcMode=diseqc_a_b_c_d
    config.Nims.1.diseqcA=192
    config.Nims.1.diseqcB=130
    config.Nims.1.diseqcC=282
    config.Nims.1.diseqcD=3601
    config.Nims.1.diseqcMode=diseqc_a_b_c_d
    config.OpenWebif.webcache.screenshot_refresh_auto= true
    config.OpenWebif.webcache.screenshot_refresh_time= 1
    config.timezone.val=Dublin
    config.tv.lastroot=1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "bouquets.tv" ORDER BY bouquet;1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "userbouquet.news__tv_.tv" ORDER BY bouquet;
    config.tv.lastservice=1:0:19:641:2454:13E:820000:0 :0:0:
    config.usage.channelselection_preview=true
    config.usage.check_timeshift=false
    config.usage.crypto_icon_mode=1
    config.usage.default_path=/media/hdd/movie/
    config.usage.hdd_standby=60
    config.usage.powerLED=false
    config.usage.service_icon_enable=true
    config.usage.servicelist_number_of_services=14
    config.usage.setup_level=expert
    config.usage.show_channel_numbers_in_servicelist=f alse
    config.usage.showScreenPath=large
    config.usage.standbyLED=false
    config.usage.suspendLED=false
    config.usage.swap_snr_on_osd=true
    config.usage.zap_with_ch_buttons=true

  13. #13
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    13,945
    Thanks
    2,062
    Thanked 5,145 Times in 3,395 Posts
    So just to clarify:
    • Tuner A has its own cable which is connected to a DiSEqC switch routed to 3 LNBs.
    • Tuner B has its own cable which is connected to a different DiSEqC switch (i.e. there are 2 switches) routed to different ports of the same 3 LNBs.
    Help keep OpenViX servers online.Please donate!

  14. #14

    Title
    Junior Member
    Join Date
    May 2021
    Posts
    16
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by Huevos View Post
    So just to clarify:
    • Tuner A has its own cable which is connected to a DiSEqC switch routed to 3 LNBs.
    • Tuner B has its own cable which is connected to a different DiSEqC switch (i.e. there are 2 switches) routed to different ports of the same 3 LNBs.
    yes correct

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.