So I did as suggested and enabled Tuner A and looped tuner B to tuner A
I disabled Tuner I & J for testing.

Still getting stops on streams when someone changes the channel.
Screen Shot 2022-07-16 at 3.58.28 PM.jpg Screen Shot 2022-07-16 at 3.58.37 PM.jpg

This is what VLC says when stuff gets all choppy
[h264 @ 0x7ff382890200] error while decoding MB 15 36, bytestream 4901
[h264 @ 0x7ff382971000] Reference 2 >= 2
[h264 @ 0x7ff382971000] error while decoding MB 4 9, bytestream 5725
[h264 @ 0x7ff382883200] reference picture missing during reorder
[h264 @ 0x7ff382883200] Missing reference picture, default is 68901
[h264 @ 0x7ff3828d3800] reference picture missing during reorder
[h264 @ 0x7ff3828d3800] Missing reference picture, default is 68908
[h264 @ 0x7ff382875c00] reference picture missing during reorder
[h264 @ 0x7ff382875c00] Missing reference picture, default is 68916
[h264 @ 0x7ff382920400] mmco: unref short failure
[h264 @ 0x7ff3828d3800] left block unavailable for requested intra mode
[h264 @ 0x7ff3828d3800] error while decoding MB 0 40, bytestream 11352
[h264 @ 0x7ff382971000] decode_slice_header error
[h264 @ 0x7ff382883200] reference picture missing during reorder
[h264 @ 0x7ff382883200] reference picture missing during reorder
[h264 @ 0x7ff382883200] Missing reference picture, default is 69413
[h264 @ 0x7ff382883200] Missing reference picture, default is 69413
[h264 @ 0x7ff3828d3800] reference picture missing during reorder
[h264 @ 0x7ff3828d3800] reference picture missing during reorder
[h264 @ 0x7ff3828d3800] Missing reference picture, default is 69428
[h264 @ 0x7ff3828d3800] Missing reference picture, default is 69428
[h264 @ 0x7ff382890200] reference picture missing during reorder
[h264 @ 0x7ff382890200] Missing reference picture, default is 69436
[h264 @ 0x7ff382875c00] mmco: unref short failure
I tried running enigma in debug mode and it actually wouldn't work at first, I later found I had to kill all the TV's trying to stream as if you try initiate a stream before the gigablue has finished its boot sequence it breaks and then you have to restart enigma.

Nothing stands out in debug mode, just lots of
[eFilePushThreadRecorder] read got interrupted by signal, stop: 0
[eFilePushThreadRecorder] read got interrupted by signal, stop: 0
[eFilePushThreadRecorder] read got interrupted by signal, stop: 0
And

[eMPEGStreamParserTS] broken startcode
[eMPEGStreamParserTS] broken startcode
[eMPEGStreamParserTS] broken startcode
[eMPEGStreamParserTS] broken startcode
[eMPEGStreamParserTS] broken startcode
[eMPEGStreamParserTS] broken startcode
Big all blacks rugby match against Ireland tonight I want to watch with friends, so will try load new software tomorrow