For the last couple of buidls the AutoVolumeadjust does not remember the settings. In other words, I have to manually adjust volume each time I change to channels on a different satelite. e.g. from 28.2E to 13.E
For the last couple of buidls the AutoVolumeadjust does not remember the settings. In other words, I have to manually adjust volume each time I change to channels on a different satelite. e.g. from 28.2E to 13.E
Nobody have an answer?
I don't use any auto volume adjustment but I have no problem with volume levels on different satellites. The best method for volume control on enigma2 boxes is to put the box at 100% and then use the volume control on TV. Otherwise the levels tend to be different for AAC/MP3/AC3 audio etc.
Zgemma H7S running OpenVIX 6.2, Darkmotor, Triax TD110 dish, Inverto Black Ultra dual lnb
LG 50UM7450 4K TV, Pioneer VSX-534 Atmos AVR , Panasonic UB820 region free 4K Bluray & a PS4.
sandiego69 (02-06-22)
As nobody seems to have an answer to what is supposed to be an Openvix feature, I would like to say that it is 'broken'.
If you are talking about the plugin this should be fixed in the next release.
That's great. Thank you.
Not sure what happened to autovolumeadjust in the latest build 6.2.005 but on 6.2.002 ut was working well for me in the following way. I had it set to 20 (boost) for AAC and the overall volume set to 80. if I was watching BBC1 HD on Satellite it sat at 80 and if I switched to BBC1 HD on freeview (aerial) it upped the volume to 100 (as intended to even out the volume between Sat and Terrestrial) and then back to BBC1 HD Satellite and it went back to 80.
Lovely
then......
In 6.2.005 it no longer works. I can set individual channels to a certain volume (and it remembers) but the auto switch between AAC and non AAC is no longer operating as it did :-(
Thanks
Paul
Sure, The box is a Zgemma H7S
This is how it is configured:
2022-06-22 11_19_53-Window.png
It used to work fine switching from BBC1 HD on Satellite to BBC1 HD on Terrestrial and vice versa (as well as switching to BBC 1 SD on Terrestrial). Now it only works when switching to "BBC1 SD on Terrestrial" from either of the other two HD channels (SAT or Terrestrial) but not inbetween HD on SAt and HD on Terrestrial. Nothing has changed in terms of the sound transmissions on any of them.
SAT HD is and always was AC3
Terrestrial HD is and always was AAC-HE
Terrestrial SD is and always was MPEG
Below to show what I mean. Hope that helps :-)
Paul
2022-06-22 11_20_34-Window.png
2022-06-22 11_21_52-Window.png
2022-06-22 11_22_51-Window.png
Can you try again with this please...
https://github.com/oe-alliance/enigm...b7ae4eec9aa911
Hi Huevos,
Not entirely sure how to make sure I download the right thing from Github there seems to be a good opportunity for me to download the wrong thing/version. - never used it before :-)
Can you possibly attach the correct py file here for me and I will install it on my build and do some testing.
Don't want to cock it up....
Cheers,
Paul
smipx (24-06-22)
That worked perfectly Huevos. Many thanks for sorting that one :-)
Paul
Huevos (25-06-22)
Hi,
I have also a problem with the Auto Volume Adjustment Plugin not working anymore after updating from 5.4.016 to 6.2.005 on my Vu+ Duo4kSE.
The plugin is enabled with modus "remember service volume value" - but it doesn't remember anything.
It just uses the same volume for all channels.
I even removed and re-installed the plugin from scratch.
And in /etc/enigma2 I only see the file "ava_setup.cfg" but no "ava_volume.cfg".
Harry