Hi all,
I have my Zgemma connected to my Soundbar via HDMI (done like this due to older TV creating lip sync issues when zgemma is connected to that)
The TV is connected to the soundbar via HDMI-ARC
I have enabled HDMI-ARC in the Zgemma and set all the settings as follows:
2022-04-09 09_23_00-Zgemma H7 - OpenWebif.png
2022-04-09 09_23_57-Zgemma H7 - OpenWebif.png
- When I turn off the Zgemma (Standby) the TV and Soundbar turns off - Good
- When I turn on the Zgemma the TV and Soundbar turn on - Good
- When I select Power -> Deep Standby the Zgemma goes to Deep Standby fine after displaying "Your Zgemma is Shutting down" on teh TV for about 10 seconds but, crucially, the TV and Soundbar remain on. I have to manually power off the TV using the TV remote
- When I power on the Zgemma from Deep Standby the Zgemma wakes up the TV and Soundbar - Good
I checked the logs of HDMI CEC in openvix and the Standby action was logged (see below) but the Deep Standby action did not log anything at all. I prefer to use Deep Standby at night to save power overnight (no recordings overnight) but at the moment the issue is causing me to accidentally leave the TV on all night as the screen goes black when the zgemma goes to deep standby and the TV does not warn you for some time (with an image saying "HDMI no Input Source" and by the time it shows that I may have already left the room.
Can HDMI-CEC be made to work when using Deep Standby via the settings or is this a bug??
I'm on Openvix 5.4.016 (not planing to go to v6 just now as its a big job for me) but am happy to make any little mods as needed to backport any fix if possible...
Many thanks
Paul
HDMI-CEC Log for regular standby:
Tx: 08:59:27 <Give Device Power Status> > 8F [0x0F]
Tx: 08:59:28 <Standby> > 36 [0x00]
Tx: 08:59:28 > 44 6C [0x05]
Tx: 08:59:29 <Standby> > 36 [0x05]
Rx: 08:59:29 <Set System Audio Mode> < 72 00
Rx: 08:59:29 <Report Physical Address> < 84 40 00 05
Rx: 08:59:29 <Standby> < 36
Rx: 08:59:30 <Standby> < 36
Rx: 08:59:30 <Set Menu Language> < 32 eng
Rx: 08:59:30 <Device Vendor ID> < 87 00 00 F0
Rx: 08:59:30 <Device Vendor ID> < 87 00 00 F0
Tx: 08:59:37 <Image View On> > 04 [0x00]
Tx: 08:59:37 <Active Source> > 82 41 00 [0x0F]
Tx: 08:59:37 <Menu Status> > 8E 00 [0x00]
Tx: 08:59:37 > 44 6D [0x05]
Tx: 08:59:37 <System Mode Audio Request> > 70 41 00 [0x05]
Rx: 08:59:38 <Routing Change> < 80 40 00 41 00
Rx: 08:59:38 <Set System Audio Mode> < 72 01
Rx: 08:59:38 <Set System Audio Mode> < 72 01
Rx: 08:59:38 <Set Menu Language> < 32 eng
Rx: 08:59:38 <Device Vendor ID> < 87 00 00 F0
Rx: 08:59:38 < 1A 01
Rx: 08:59:39 <Device Vendor ID> < 87 00 00 F0
Rx: 08:59:39 <Report Physical Address> < 84 40 00 05
Rx: 08:59:39 <Device Vendor ID> < 87 00 00 F0
Rx: 08:59:40 <Report Physical Address> < 84 40 00 05
Tx: 08:59:41 <Image View On> > 04 [0x00]
Tx: 08:59:41 <Active Source> > 82 41 00 [0x0F]
Tx: 08:59:41 <Menu Status> > 8E 00 [0x00]
Tx: 08:59:41 > 44 6D [0x05]
Tx: 08:59:41 <System Mode Audio Request> > 70 41 00 [0x05]
Rx: 08:59:41 <Set System Audio Mode> < 72 01
Rx: 08:59:45 <Give Device Power Status> < 8F
Tx: 08:59:45 <Report Power Status> > 90 00 [0x58]