Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Hi TWOL,
thank you very much for you help,could you please send your code to change mac adress for wifi
I am still testing, …….. a few issues.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
@ALL ... attached are 2 module changes for testing the WiFi MAC reset.
I would suggest that everyone who tests this, runs a settings backup beforehand .... as far as I can see it should be OK, but ..........
So to test.
Please enable debug logs... Menu/setup/system/log/settings ---- enable and save to hdd not flash
Restart.
1. putty - login (root and user password) and then type init 4 (space between)
2. filezilla.
in /usr/lib/enigma2/python/Components rename Network.pyc to xNetwork.pyc, then copy Network.py (from attachment) to /usr/lib/enigma2/python/Components
in /usr/lib/enigma2/python/Screens rename NetworkSetup.pyc to XNetworkSetup.pyc, then copy NetworkSetup.py (from attachments) to /usr/lib/enigma2/python/Screens
3. putty - enter init 6 (space between)
4. post results and debug logs
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
I've tried it on 6.1.003.005 (Dev), works ok as far as I can tell. Changing the mac address and rebooting remembers the new version.
Putting back the original value and wifi still works.
NB Debug logs will contain encryption keys/passwords.
My VU Ultimo4k doesn't remember wifi values (by default) after a settings restore, I needed to add /etc/wl.conf.wlan3 to backups ages ago.
ET10K wifi gets backed up ok without any need for changes.
@ccs …. Really appreciate the testing, many thanks.
does this mean we should be adding more settings to the settings backup if they are present in the image?
i rarely use the wifi connections, so no knowledge …. Thought it was backed up by default
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
I mentioned it when I first got the Ultimo4K (it has built in wifi), but moved over to a wired lan a few weeks later, so it kind of got forgotten.
I worked out what was needed for that specific box when trying out something using wifi, but never reported it.
The ET10K (USB dongle, RTL8192cu, it comes pre-loaded) backs up /etc/wpa_supplicant.conf and /etc/wpa_supplicant.wlan0.conf. I've never added them.
They're even in a Hades backup from 7 years ago.
Last edited by ccs; 24-03-22 at 14:00.
Hi,many thanks for your help, i will try it tonight and give you feed back.
Followed your instructions, wireless connection up on reboot.
Crashes when entering wireless device.
Last edited by twol; 24-03-22 at 16:50.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
I've just tried again using the changed (new) mac address and all is ok. Also changing from wlan to lan and back again is ok.