Blind scan for transponders doesn't work: always get message from pic blindscan3:
blindscan.jpgblindscan1.jpgblindscan2.jpgblindscan3.jpg
Blind scan for transponders doesn't work: always get message from pic blindscan3:
blindscan.jpgblindscan1.jpgblindscan2.jpgblindscan3.jpg
Where are you located? 55W is pretty low on the horizon from UK/Ireland. I used to receive from 58W with my 1.1m dish some years ago, but can't pick up any transponders now as I think the Europe beams were discontinued.
GB Quad Plus, Mut@nt HD51, AX HD61, 80cm dish and Supreme Dark motor. Sony STR-DN 1060, Sony UHP-H1 Bluray, Odroid N2+ (CoreElec), Monitor Audio Bronze 5.1 speakers
What box and tuner number?
The box brand is in the title of the post, but here it is:vu+zero4k.jpg
It doesn't matter what satellite: it is the same issue.
Didn't have this issue with openvix-5.4.016.release-vuzero4k_usb.
Are you always scanning with "only scan unknown transponders" switched on?
If so try with it switched off.
Huevos (18-11-21)
lme (21-11-21)
But the original complaint was that i wasn't finding anything,
Are we sure there are any unknown transponders?
That's all i found:
messages.txt
And this:Enigma2_debug_2021-11-19_15-25-50.log
Last edited by lme; 19-11-21 at 21:32.
Are any channels or services found in a regular scan?
Looks like the binary is outputting junk.
It is the same issue after openvix-6.0.003.release-vuzero4k!
blind.jpg
log after upgrade from internet:Enigma2_debug_2021-11-21_16-42-16.log
not only that is not fixed, but 4 out of 5 times there is no log at all !!!
finally the log after flushing the box from usb:Enigma2_debug_2021-11-21_18-35-53.log
Last edited by lme; 22-11-21 at 00:49.
lme (22-11-21)