openvix 6 0 001 - settings backup doesn't install

[twol]

Hi, thanks for all help!

So i used theH9SDmanager this morning on my H9S.
Once you hit the Green button (initialise SD card) it takes about 5 minutes or so to initialise the card(depending on the mmc card technology/speed) and then copy the devices root to the card.
The pictures show the status after the initial reboot, followed by restart using the sd card.

Things to remember:
1) when you initialise the card, the task is not completed until the original screen is shown e.g. you see Superblocks ... done, but then it takes about 4 minutes more to copy the root files
2) then hit Red button reboot.......this ensure sd card is mounted correctly
3) After reboot, hard press Power button, and select H9SDroot ---> select swap to SD

As the pictures show, works perfectly for me, BUT ... make sure that hacks like Flash Expander are not installed

[ravstar]

Couple of questions

1. Is it possible to have an option to reduce the size of picon in channel list (similar to OpenATV)?
2. Is it possible to sort/rearrange menu items in main menu according to preference?

Many thanks

I am using Zgemma H9 combo with Openvix 6.0.001

[malcolmp]

Hi, thanks, i'll have another go. BTW I followed the FlashExpander from OpenVix pages!

[twol]

Hi, thanks, i'll have another go. BTW I followed the FlashExpander from OpenVix pages!

Could be, with many of the older boxes there was no choice

[malcolmp]

I had a go, all seemed OK unit I tried to install 6.0.001 and the box froze again.

[commando19]

New OpenViX installed
When I want to change the password, it does not change it or set a new one either from the device itself or via the telnet command passwd

Authentication token manipulation error
password unchanged

octagon sf 8008

- does not work even after the latest update image openvis 6.0

[malcolmp]

Another update, Reflashed with 6.0.01, IP changed on box, was suffix 107 now 94. four new crash logsEnigma2_crash_2021-11-14_15-10-59.logEnigma2_crash_2021-11-14_15-08-39.logEnigma2_crash_2021-11-14_15-07-54.logEnigma2_crash_2021-11-14_15-23-11.log
it seems ok now.

[ccs]

.... not sure if this is the cause, but timeshift not enough diskspace for timeshift! (less than 1GB) reported in the last log.

[twol]

Another update, Reflashed with 6.0.01, IP changed on box, was suffix 107 now 94. four new crash logsEnigma2_crash_2021-11-14_15-10-59.logEnigma2_crash_2021-11-14_15-08-39.logEnigma2_crash_2021-11-14_15-07-54.logEnigma2_crash_2021-11-14_15-23-11.log
it seems ok now.

I have no clue from the crash log - why you are getting that assert error.

As the box is now used for IPTV, are the tuner(s) enabled or disabled??
If not - disable.

Can you post which plugins if any you have installed - thanks!

From last line I assume its running OK at the moment?

[commando19]

Even with 6.0.002 I don't have the ability to change the password or FTP

[ccs]

Even with 6.0.002 I don't have the ability to change the password or FTP

Works ok for me using putty or telnet, what are you using to get to the box?

[commando19]

Works ok for me using putty or telnet, what are you using to get to the box?

not even with putty

no passwd change.jpg

[malcolmp]

I'll get back to you.

[twol]

not even with putty

no passwd change.jpg

I assume something in your settings backup - try flash without restoring settings and then set password.
If that works try to restore settings from settings backup using ViX BackupManager or jut set the box up manually

[commando19]

so I said the new image is without adjustment. Here I am now from the box download v6.0.002 and rewritten and now it works to change the pass